SMART tool Update?!

Started by karl047, June 08, 2019, 08:36:42 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions
June 08, 2019, 08:36:42 PM
Hi Developers,
I run my OPNsense on Supermicro Motherboard with Samsung SSD, after installation of SMART tool it shows that no SMART device is found !!!

Is there an Update soon for this tool (19.7 ?) ?..

Thanks...

Regards,
Karl
June 25, 2019, 04:02:42 PM #1
i can´t see any problem.
i´m using the C3558 Atom board from supermicro. No problems at all!! see my screenshot!!
Supermicro A2SDi-4C-HLN4F
Team Rebellion Member (sidebar / themes: tukan, cicada & vicuna)
June 25, 2019, 04:41:43 PM #2
Updates for FreeBSD ports come from the FreeBSD tree which comes from the software provider. I haven't seen smartmon updates in a while in FreeBSD but you can surely check up the chain for news.


Cheers,
Franco
June 25, 2019, 10:07:22 PM #3
@opnsenseuser: see please my screenshot too !

I use a SSD from Samsung...
June 26, 2019, 06:50:53 PM #4
maybe you can fix this by changing some bios settings?
Are you using uefi or legacy boot?
what board are using ?
Supermicro A2SDi-4C-HLN4F
Team Rebellion Member (sidebar / themes: tukan, cicada & vicuna)
June 27, 2019, 05:54:20 AM #5 Last Edit: June 27, 2019, 10:39:14 AM by karl047
I use the same of yours: A2SDi-4C-HLN4F Board, as I said: Samsung M2 SSD EVO PLUS (250 Gb) & uefi ...
June 27, 2019, 10:40:48 AM #6 Last Edit: June 27, 2019, 10:46:09 AM by opnsenseuser
I am using a samsung evo 950 ssd m.2.

1. Did you already deal with the bios?. maybe there is something not optimally set.
2. Have you ever tried to reinstall the smart widget?
3. Lastest firmware? https://www.supermicro.com/products/motherboard/atom/A2SDi-4C-HLN4F.cfm
Supermicro A2SDi-4C-HLN4F
Team Rebellion Member (sidebar / themes: tukan, cicada & vicuna)
July 03, 2019, 07:37:41 AM #7 Last Edit: July 03, 2019, 07:56:20 AM by chienchou.pan
Quote from: opnsenseuser on June 27, 2019, 10:40:48 AM
I am using a samsung evo 950 ssd m.2.

1. Did you already deal with the bios?. maybe there is something not optimally set.
2. Have you ever tried to reinstall the smart widget?
3. Lastest firmware? https://www.supermicro.com/products/motherboard/atom/A2SDi-4C-HLN4F.cfm

I have the same issue. My disk is samsung 970 evo plus NVMe M.2 250G, when I install smart tools, it also shows that no SMART device is found.

I guess the problem is the device ID different. The SATA type will be ada0, but NVMe type will be nvme0, so I used command "  /usr/local/sbin/smartctl -a /dev/nvme0" , it will show smart information normally. So I hope the web GUI can fixd this issue in the future thanks.
July 03, 2019, 09:09:25 AM #8
Nice catch. Please raise an issue on GitHub: https://github.com/opnsense/plugins/issues


Cheers,
Franco
Print
Go Up Pages1
User actions