Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Topics - cyberbot

#1
20.1 Legacy Series / Two GW and virtual IP
April 17, 2020, 04:55:00 PM
Dear all,

Our box has two NIC connected,
our ISP provided us with two IP blok.
each 6 IP has it own GW.
we managed to connect two NICS LAN/WAN and using Virtual WAN IP.
but the second IP blok cannot get them routed because there is no GW defined as we are out of NICS.

is it possible to have the GW add as virtual GW as well?
Do we really needs a physical cable connect in order to have the second GW up and running ?
#2
18.7 Legacy Series / Voip issue 18.x
July 18, 2018, 05:56:03 PM
Dear all.
Two ago we have updated two hardware to 18.12 from 17.9. after the update our VOIP Phone are not working proply.
the conversation drops like 2 second from time to time so the other side miss always 2 second from the conversation.
it kinda frustrating for the users. i've been reading on the forum and found somewhere that the frebsd 11/12 has changed the NAT / Firewall how it deal with UDP pakkets and we have to change the firewall from normal to Conservative which we did. unfortunately it didnt fixed it.
I dont know if i am the only one with this issue but i've reading that i have to do the next :

Disable source port rewriting
Set Conservative state table optimization
Disable scrub

Can someone please advise how to do so ? and if this the right configuration ?

Firewall WAN . no open ports
Firewall LAN   any to any
#3
Dutch - Nederlands / MultiWAN van Pfsense naar OPNsense
October 03, 2017, 04:11:55 PM
Beste Allemaal,
vandaag hebben voor het eerste een OPNsense geïmmigreerd vanuit Pfsense,
alles werkt prima,
Wij krijgen MULTIWAN niet echt werken van alles geprobeerd maar echter werkt gewoon niet.
wat niet werkt ?
WAN1 = is de hoofde internet
WAN2  = is de backup line.
allebei zijn lid van 1 groep WANFAILOVER
tier 1 is WAN1
Tier 2 is WAN2
Trigger Level ( Packet Loss or High Latency )

echter als wij de WAN2 kabel lost hebben blijft de internet werken, en als  WAN1 uit gaat de internet uit.

Wij hebben achter de LAN nog 4 VLANS.

Kan iemand mij uitleggen waarom ?

#4
Dutch - Nederlands / nieuw van opnsense
September 05, 2017, 10:35:51 AM
Beste allemaal,
ik ben nieuwe naar opnsense, wij hebben pfsense 5 jaar lang gebruikt echter zijn wij tevreden erover.
momentueel heb ik opnsense op een VM om te testen, ik ben echt onder de indruk van de snelheid en hoe vaak de security updates worden bijgewerkt.
echt een top producte.
voor dat wij over willen naar pfsense heb ik een aantal vragen.
kunnen wij een site to site vpn gebruiken met een pfsense vanuit een opnsense als een server?
is er een loadbalancer voor porten zoals 443 ?

bij voor dank.