Messages

A couple of day I update to 26.7.1. I am running a transparent bridge with 2 ports on a protecli device. Up until now everything has run flawlessly for about 6 months. What happens is the device crashes and I cant see the errors as they scroll by so fast I cant read any of them and the device is inaccessible. I have dont a bit of troubleshooting and discovered it is related to the network. If I boot without anything plugged into Ethernet ports everything runs fine but of course the device is useless like that. As soon as I plug in WAN and LAn cables it crashed doing what looks like a diagnostic dump. I have checked log files and there is nothing in them related to this. Is there anyway I can roll back the last update?

This has been problematic for me. I have a transparent bridge running IP4 and IP6. The bridge is on OPT1 and WAN. The IP4 address space is on the OPT1 interface 192.168.1.0/24. Traffic passes fine between OPT1 and the WAN. I cannot get a connection outbound from the bridge0 device to the outside world. This means I cannot get updates or add packages. I have been managing the bridge via the LAN interface on 192.168.10.1/24. I suspect this .10 address space is the problem. I have tried a few things and ended up locking myself out a couple of times so I am kind of hesitant to play around with settings until I know what is going on. How can I configure the device to it can communicate out the WAN and get updates?

I solved the issue. I forgot to add IPV6 to firewall.

 I have a ONT that connects to a router. I have a working IPV6 network until I insert an OPNsense bridge. IPv4 works fine on the Opnsense bridge but I cannot get any GUAs on the router with the bridge in place. I followed all the directions here https://docs.opnsense.org/manual/how-tos/lan_bridge.html but I just cant get an addresses downstream.