"
Hello people
I am in the middle of making my final school project, which includes setting up a Site-To-Site VPN. I can get a handshake between the 2 sites, but i cant access any of the interfaces between the two sites. Can anyone help me?
Here are some details:
Site 1:
Wan IP: 192.168.1.114/24 (OPNsense router connected to an existing network)
I have multiple differents VLANs set up, but i want to access the other site from VLAN 60, which is my management VLAN. The VLAN has the ip address of 192.168.60.1.
Site 2:
Wan IP: 192.168.1.122/24 (OPNsense router Connected to the same existing Network as router 1)
LAN IP: 192.168.110.1/24
As you can see on the attached pictures, i have setup a wireguard instance on each site. On site 1 the Tunnel Adress is 10.100.100.1/24 and on Site 2 the Tunnel Adress is 10.100.100.2/24. The listening port is 51821 on each site, as i also have a Client-to-site vpn running on port 51820 on site 1.
On Each site I have setup a peer. On Site 1 the peer has the public key of Site 2 and the allowed ips is 10.100.100.2/32 and 192.168.110.0/24. The endpoint adress is 192.168.1.122. On Site 2 the peer has the public key of site 1 and the allowed IP's is 10.100.100.1/32 and 192.168.60.0/24. The endpoint address is 192.168.1.114.
On the WAN interface on each site, i have created a rule that allows all incoming traffic to the WAN adress on port 51821. On the Wireguard Interface on each site i have created an any-any allow rule just for testing purposes.
On Site 2 i have a allow any to LAN Net rule just to make sure that it doesnt block access
On Site 1 i have a allow VLAN 60 net to access any to make sure it has access to everything.
So why cant i ping 192.168.110.179 (An ubuntu machine that is connected in LAN to Site 2) from my pc that is in VLAN 60 on Site 1?
I hope that one or more of you can help me.
In advance, thank you.
I am in the middle of making my final school project, which includes setting up a Site-To-Site VPN. I can get a handshake between the 2 sites, but i cant access any of the interfaces between the two sites. Can anyone help me?
Here are some details:
Site 1:
Wan IP: 192.168.1.114/24 (OPNsense router connected to an existing network)
I have multiple differents VLANs set up, but i want to access the other site from VLAN 60, which is my management VLAN. The VLAN has the ip address of 192.168.60.1.
Site 2:
Wan IP: 192.168.1.122/24 (OPNsense router Connected to the same existing Network as router 1)
LAN IP: 192.168.110.1/24
As you can see on the attached pictures, i have setup a wireguard instance on each site. On site 1 the Tunnel Adress is 10.100.100.1/24 and on Site 2 the Tunnel Adress is 10.100.100.2/24. The listening port is 51821 on each site, as i also have a Client-to-site vpn running on port 51820 on site 1.
On Each site I have setup a peer. On Site 1 the peer has the public key of Site 2 and the allowed ips is 10.100.100.2/32 and 192.168.110.0/24. The endpoint adress is 192.168.1.122. On Site 2 the peer has the public key of site 1 and the allowed IP's is 10.100.100.1/32 and 192.168.60.0/24. The endpoint address is 192.168.1.114.
On the WAN interface on each site, i have created a rule that allows all incoming traffic to the WAN adress on port 51821. On the Wireguard Interface on each site i have created an any-any allow rule just for testing purposes.
On Site 2 i have a allow any to LAN Net rule just to make sure that it doesnt block access
On Site 1 i have a allow VLAN 60 net to access any to make sure it has access to everything.
So why cant i ping 192.168.110.179 (An ubuntu machine that is connected in LAN to Site 2) from my pc that is in VLAN 60 on Site 1?
I hope that one or more of you can help me.
In advance, thank you.
