Messages

I figured out the problem. I didn't know this but since my vm is through a proxmox server pc I had to include the VLAN tag in the hardware section of my vm and now the connection works.

I created a vlan network for my home server which is meant to not allow devices on it to access the internet. After creating the no internet access firewall rule I then created a second rule to allow devices from my regular LAN network to access it on top of the block access rule but it doesn't seem to be working. Below are screenshots of the Pass and Block firewall rules. mediaserver is the new network with no internet access for the devices virtual machine servers that will be in it. I'll put this in here if it matters as well but so far I've only put a Home Assistant virtual machine in here and set the gateway and domain as 192.168.6.1 since the mediaserver vlan does use that as the gateway and I set the static IP as 192.168.6.2 and left the netmask at the default 255.255.255.0. This was done in the Home assistant settings since I was able to set it in there.

I have a homelab that I'll be installing home assistant to on a new virtual machine and want to make sure I made a network where devices on it cannot access the internet but devices on the network can access it and this is my first time messing with firewall settings. This new network would be under the IP range that starts at 192.168.5.1 instead of the default one for example. Also I already have Wireguard to connect to my home network normally but would I be able to connect to servers on this new ip range still even if it's a different network or will I need a new wireguard instance for this new network?

I'm setting up ad/tracker blocking for the first time using the blocklists in unbound DNS and after doing some adblock tests I keep getting something saying it failed to stop the google domain tracker "https://pagead2.googlesyndication.com" I tried adding it to the block list domain but it still didn't show as successfully blocked. Is there somewhere else I'm supposed to paste it into or something else I'm supposed to do?