Messages

No one has an idea how this can be done or is the function simply not available?

Yeeesssss it is working!
Did the tunables only = not working
Tunables + MTU = working

Thanks for the help!!!

Cheers Mike

Hi thanks for the reply
I will test and report back!

Thanks for your reply.
That would work if I had static public IPs.
I forgot to mention that I use dynamic DNS for the WAN IPs.

I would like to configure it that the traffic goes over the other wan interface. Large backups go over wireguard. So default WAN interface stays free for other traffic like Internet

Hi all,

I'm trying to configure Zenarmor.
After installation the engine starts and stops after some seconds. Same if I start the engine manually.
The log in the WebGui only says engine started / stopped but not why.
Are there any more logs? Did someone had the same problem?

Best regards and many thanks,
Mike

Hi all,

I configured a site to site VPN with Wireguard at it is working great.
On one Opnsense Firewall I have two WAN Interfaces. I did not find any option to choose the interface for the outgoing traffic to the other firewall.
Does someone know how this needs to be configured? Per default it always go through the default WAN Interface.

Best regards and many thanks,
Mike