1
24.1 Legacy Series / Re: Serial wont install
« on: May 04, 2024, 08:43:07 pm »
Hey Franco!
Thanks buddy I still lurk occasionally!
ya got me
Working great now!
Thanks buddy I still lurk occasionally!
ya got me
Working great now!
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
24.1 Legacy Series / Serial wont install
« on: May 04, 2024, 06:33:19 pm »
Hello, I was wondering if anyone else has had issues installing via the serial image in UEFI mode?
OPNsense-24.1-serial-amd64.img
DEC740
The console died loading ax0 and ax1. It stops responding. Though it does not disconnect my session.
OPNsense-24.1-serial-amd64.img
DEC740
The console died loading ax0 and ax1. It stops responding. Though it does not disconnect my session.
3
23.1 Legacy Series / Re: Biz license and mirror issue
« on: April 18, 2023, 07:44:23 pm »
Perfecct, I figured as much. I just didn't know the printout was a place holder. Thanks Franco!
4
Hardware and Performance / Re: Looking to upgrade the RAM in a DEC740
« on: February 28, 2023, 09:13:19 pm »
Updated the previous post. All part numbers and modules were tested personally. You can also look for ones with similar part/model numbers as long as they meet the specified requirements posted previously.
The default BIOS setting for timings and ram clocks is <Auto> so it is simply reading the JDEC rating of the ram installed.
The default BIOS setting for timings and ram clocks is <Auto> so it is simply reading the JDEC rating of the ram installed.
5
Hardware and Performance / Re: Looking to upgrade the RAM in a DEC740
« on: February 28, 2023, 09:42:24 am »
hah thats a good Idea! I put a 256gb in it that I had around but I know there are a few sales on 1tb at the moment!
6
Hardware and Performance / Re: Looking to upgrade the RAM in a DEC740
« on: February 27, 2023, 11:44:33 pm »I would argue that it can easily be replaced. For reference, I have a DEC750 with 8 GByte and according to 'dmidecode', this is:Code: [Select]Handle 0x000C, DMI type 17, 40 bytes
Memory Device
Array Handle: 0x000B
Error Information Handle: 0x000E
Total Width: 64 bits
Data Width: 64 bits
Size: 8 GB
Form Factor: DIMM
Set: None
Locator: DIMM 0
Bank Locator: P0 CHANNEL A
Type: DDR4
Type Detail: Synchronous Unbuffered (Unregistered)
Speed: 2667 MT/s
Manufacturer: Unknown
Serial Number: XXXXXXXXX
Asset Tag: Not Specified
Part Number: TS1GLH64V6BL
Rank: 1
Configured Memory Speed: 2400 MT/s
Minimum Voltage: 1.2 V
Maximum Voltage: 1.2 V
Configured Voltage: 1.2 V
So it is only one slot of DDR4 unbuffered UDIMM which must support at least 2400 MT/s. The Transcend part in my box has CL19 and single rank. It can be, but does not have to be ECC, but it needs to be UDIMM, not RDIMM: https://www.reddit.com/r/OPNsenseFirewall/comments/qxo7eh/anyone_has_info_on_the_a10gen3_board_and_the/
The netboard A10 can support up to 32 GByte: https://www.deciso.com/netboard-a10-gen3/, but to fit into the case, I think you need VLP form factor, such as MTA18ADF4G72AZ-2G6.
You will obviously lose the warranty when you open the device, there is a seal you would have to break.
^^ This. As long as the ram is a VLP (1.2v) DDR4 UDIMM and is JDEC between 2400/2666 it should work.
At current I have the following 16GB Micron stick (Crucial)
Micron PN: MTA18ADF2G72AZ-2G6E1ZI
Crucial PN: CT16G4XFD8266.18FE1
It works fine in my DEC740.
The following 32gb Micron stick also works.
Micron PN: MTA18ADF4G72AZ-2G6B2
7
23.1 Legacy Series / Biz license and mirror issue
« on: February 26, 2023, 10:18:30 pm »
I did some digging and came to the conclusion the following issue may be DNS related.
However; after changing the upstream DNS server: System > Settings > General and several restarts of the router later my DEC740 doesnt appear to be able to contact the mirror.
I assumed this was because the business version may be running "behind" for stability as I am on 23.1.1 community after a fresh install. Looking at the print out though it shows a searched version higher than what I am on.
Is this me or the mirror? Is there anything I can do? It seems that rather than DNS it cant fetch some manifest file.
This is the health check:
However; after changing the upstream DNS server: System > Settings > General and several restarts of the router later my DEC740 doesnt appear to be able to contact the mirror.
I assumed this was because the business version may be running "behind" for stability as I am on 23.1.1 community after a fresh install. Looking at the print out though it shows a searched version higher than what I am on.
Code: [Select]
***GOT REQUEST TO CHECK FOR UPDATES***
Currently running OPNsense 23.1.1_2 at Sun Feb 26 13:13:28 PST 2023
Fetching subscription information, please wait... done
Fetching changelog information, please wait... fetch: https://opnsense-update.deciso.com/${SUBSCRIPTION}/FreeBSD:13:amd64/23.4/sets/changelog.txz: Not Found
Updating OPNsense repository catalogue...
pkg: https://opnsense-update.deciso.com/${SUBSCRIPTION}/FreeBSD:13:amd64/23.4/latest/meta.txz: Not Found
repository OPNsense has no meta file, using default settings
pkg: https://opnsense-update.deciso.com/${SUBSCRIPTION}/FreeBSD:13:amd64/23.4/latest/packagesite.pkg: Not Found
pkg: https://opnsense-update.deciso.com/${SUBSCRIPTION}/FreeBSD:13:amd64/23.4/latest/packagesite.txz: Not Found
Unable to update repository OPNsense
Error updating repositories!
pkg: Repository OPNsense cannot be opened. 'pkg update' required
Checking integrity... done (0 conflicting)
Your packages are up to date.
***DONE***Is this me or the mirror? Is there anything I can do? It seems that rather than DNS it cant fetch some manifest file.
This is the health check:
Code: [Select]
***GOT REQUEST TO AUDIT HEALTH***
Currently running OPNsense 23.1.1_2 at Sun Feb 26 13:20:18 PST 2023
>>> Check installed kernel version
Version 23.1.1 is correct.
>>> Check for missing or altered kernel files
No problems detected.
>>> Check installed base version
Version 23.1.1 is correct.
>>> Check for missing or altered base files
No problems detected.
>>> Check installed repositories
OPNsense
>>> Check installed plugins
os-etpro-telemetry 1.6_1
os-theme-cicada 1.32
>>> Check locked packages
No locks found.
>>> Check for missing package dependencies
Checking all packages: .......... done
>>> Check for missing or altered package files
Checking all packages: .......... done
>>> Check for core packages consistency
Core package "opnsense" has 66 dependencies to check.
Checking packages: .
beep-1.0_1 has no upstream equivalent
Checking packages: .
ca_root_nss-3.88.1 has no upstream equivalent
Checking packages: .
choparp-20150613 has no upstream equivalent
Checking packages: .
cpustats-0.1 has no upstream equivalent
Checking packages: .
dhcp6c-20200512_1 has no upstream equivalent
Checking packages: .
dnsmasq-2.89,1 has no upstream equivalent
Checking packages: .
dpinger-3.3 has no upstream equivalent
Checking packages: .
expiretable-0.6_2 has no upstream equivalent
Checking packages: .
filterlog-0.6 has no upstream equivalent
Checking packages: .
flock-2.37.2 has no upstream equivalent
Checking packages: .
flowd-0.9.1_3 has no upstream equivalent
Checking packages: .
hostapd-2.10_5 has no upstream equivalent
Checking packages: .
ifinfo-13.0 has no upstream equivalent
Checking packages: .
iftop-1.0.p4 has no upstream equivalent
Checking packages: .
isc-dhcp44-relay-4.4.3P1 has no upstream equivalent
Checking packages: .
isc-dhcp44-server-4.4.3P1 has no upstream equivalent
Checking packages: .
lighttpd-1.4.68 has no upstream equivalent
Checking packages: .
monit-5.32.0 has no upstream equivalent
Checking packages: .
mpd5-5.9_13 has no upstream equivalent
Checking packages: .
ntp-4.2.8p15_5 has no upstream equivalent
Checking packages: .
openssh-portable-9.1.p1,1 has no upstream equivalent
Checking packages: .
openssl-1.1.1t,1 has no upstream equivalent
Checking packages: .
openvpn-2.5.8 has no upstream equivalent
Checking packages: .
opnsense-23.1.1_2 has no upstream equivalent
Checking packages: .
opnsense-installer-23.1 has no upstream equivalent
Checking packages: .
opnsense-lang-22.7.3 has no upstream equivalent
Checking packages: .
opnsense-update-23.1.1 has no upstream equivalent
Checking packages: .
pam_opnsense-19.1.3 has no upstream equivalent
Checking packages: .
pftop-0.8_2 has no upstream equivalent
Checking packages: .
php81-ctype-8.1.15 has no upstream equivalent
Checking packages: .
php81-curl-8.1.15 has no upstream equivalent
Checking packages: .
php81-dom-8.1.15 has no upstream equivalent
Checking packages: .
php81-filter-8.1.15 has no upstream equivalent
Checking packages: .
php81-gettext-8.1.15 has no upstream equivalent
Checking packages: .
php81-google-api-php-client-2.4.0 has no upstream equivalent
Checking packages: .
php81-ldap-8.1.15 has no upstream equivalent
Checking packages: .
php81-pdo-8.1.15 has no upstream equivalent
Checking packages: .
php81-pecl-radius-1.4.0b1_2 has no upstream equivalent
Checking packages: .
php81-phalcon-5.1.4 has no upstream equivalent
Checking packages: .
php81-phpseclib-3.0.18 has no upstream equivalent
Checking packages: .
php81-session-8.1.15 has no upstream equivalent
Checking packages: .
php81-simplexml-8.1.15 has no upstream equivalent
Checking packages: .
php81-sockets-8.1.15 has no upstream equivalent
Checking packages: .
php81-sqlite3-8.1.15 has no upstream equivalent
Checking packages: .
php81-xml-8.1.15 has no upstream equivalent
Checking packages: .
php81-zlib-8.1.15 has no upstream equivalent
Checking packages: .
pkg-1.18.4 has no upstream equivalent
Checking packages: .
py39-Jinja2-3.1.2 has no upstream equivalent
Checking packages: .
py39-dnspython-2.2.1_1,1 has no upstream equivalent
Checking packages: .
py39-duckdb-0.6.1 has no upstream equivalent
Checking packages: .
py39-netaddr-0.8.0 has no upstream equivalent
Checking packages: .
py39-numpy-1.23.5_2,1 has no upstream equivalent
Checking packages: .
py39-pandas-1.5.3,1 has no upstream equivalent
Checking packages: .
py39-requests-2.28.2 has no upstream equivalent
Checking packages: .
py39-sqlite3-3.9.16_7 has no upstream equivalent
Checking packages: .
py39-ujson-5.0.0 has no upstream equivalent
Checking packages: .
py39-vici-5.9.9 has no upstream equivalent
Checking packages: .
radvd-2.19_1 has no upstream equivalent
Checking packages: .
rrdtool-1.8.0_2 has no upstream equivalent
Checking packages: .
samplicator-1.3.8.r1_1 has no upstream equivalent
Checking packages: .
squid-5.7 has no upstream equivalent
Checking packages: .
strongswan-5.9.9_1 has no upstream equivalent
Checking packages: .
sudo-1.9.12p2 has no upstream equivalent
Checking packages: .
suricata-6.0.9_1 has no upstream equivalent
Checking packages: .
syslog-ng-3.38.1 has no upstream equivalent
Checking packages: .
unbound-1.17.1_2 has no upstream equivalent
Checking packages: .
wpa_supplicant-2.10_6 has no upstream equivalent
Checking packages: .
zip-3.0_1 has no upstream equivalent
***DONE***
8
Hardware and Performance / Re: DEC740 BIOS upgrades
« on: February 25, 2023, 02:10:36 am »
For those curious my device came in and I opened it.
Examining manually the bios available at: https://docs.opnsense.org/hardware/bios.html
Is version: 05.32.50.0014-A10.22
However on my particular DEC740
the BIOS version is: 05.32.50.0014-A10.24
I found this by connecting my eeprom reader. The chip is a MXIC MX25U6432F: https://www.mxic.com.tw/en-us/flash-memory-solutions/extended-temperature/Pages/spec.aspx?p=MX25U6432F&m=Ext+Temperature&n=PM2850
In something like AS/NeoProgrammer or your flavor of flash software the following 1.8v chip profiles worked.
- MX25U6473F
- MX25U6435F
I flashed the original BIOS back as it was newer.
Examining manually the bios available at: https://docs.opnsense.org/hardware/bios.html
Is version: 05.32.50.0014-A10.22
Code: [Select]
BIOS Version : 05.32.50.0014-A10.22
BIOS Build Date : 02/18/2022
Processor Type : AMD Ryzen Embedded V1500B
System Memory Speed : 2400 MHz
However on my particular DEC740
the BIOS version is: 05.32.50.0014-A10.24
Code: [Select]
BIOS Version : 05.32.50.0014-A10.24
BIOS Build Date : 12/14/2022
Processor Type : AMD Ryzen Embedded V1500B
System Memory Speed : 2400 MHz
I found this by connecting my eeprom reader. The chip is a MXIC MX25U6432F: https://www.mxic.com.tw/en-us/flash-memory-solutions/extended-temperature/Pages/spec.aspx?p=MX25U6432F&m=Ext+Temperature&n=PM2850
In something like AS/NeoProgrammer or your flavor of flash software the following 1.8v chip profiles worked.
- MX25U6473F
- MX25U6435F
I flashed the original BIOS back as it was newer.
10
Hardware and Performance / DEC740 BIOS upgrades
« on: February 21, 2023, 06:40:18 am »
Hello! long time no see.
I ran my own SFF pc with opnsense for a long time, some VMs still. I donated from time to time, but with the fans failing in my SFF I decided to purchase a DEC740 to further support the project.
I am picky about making sure I am upto date though. Are there updates or resources to download and flash the hardware's BIOS?
I ran my own SFF pc with opnsense for a long time, some VMs still. I donated from time to time, but with the fans failing in my SFF I decided to purchase a DEC740 to further support the project.
I am picky about making sure I am upto date though. Are there updates or resources to download and flash the hardware's BIOS?
11
20.7 Legacy Series / Re: Hyper-V install fails Gen2 (UEFI) VM
« on: August 06, 2020, 04:27:16 pm »Thanks for reporting, maybe you're so kind to open a bug report on github for this?
Sure can.
12
20.7 Legacy Series / Hyper-V install fails Gen2 (UEFI) VM
« on: August 06, 2020, 05:49:09 am »
Hiya,
When I attempt to install 20.7 into a gen2 VM even with secure boot disabled I cannot get passed the guided/advanced install menu. My keyboard simply will not function. I cannot drop to shell or otherwise interact with it via console. The live environment including GUI however works the entire time (though with perceived increase in CPU usage judging by the GUI).
However I do not run into this issue in a gen1 VM.
Further if I create a gen2 VM after installation and attach the VHD created it will boot without issue.
Just figured id let anyone know.
When I attempt to install 20.7 into a gen2 VM even with secure boot disabled I cannot get passed the guided/advanced install menu. My keyboard simply will not function. I cannot drop to shell or otherwise interact with it via console. The live environment including GUI however works the entire time (though with perceived increase in CPU usage judging by the GUI).
However I do not run into this issue in a gen1 VM.
Further if I create a gen2 VM after installation and attach the VHD created it will boot without issue.
Just figured id let anyone know.
13
18.1 Legacy Series / Re: SQM CODEL
« on: January 21, 2018, 05:29:59 pm »
Awesome thank you very much!
14
18.1 Legacy Series / SQM CODEL
« on: January 21, 2018, 05:52:16 am »
I was looking into helping some buffer issues I am having and came across this thread from 2016 https://forum.opnsense.org/index.php?topic=2279.0 I was wondering if this was fully implemented? It seemed to drop off as a beta add on pending FreeBSD 11.1 baked it in fully.
15
Development and Code Review / Re: UniFi Controller
« on: October 29, 2017, 07:38:04 am »ah nvm this is for running the controller on the router, I was reading about integration with the gateway protocols used in the controller itself.