Messages

Can you fit in a 4th drive?

Also, perhaps related --> https://forums.freebsd.org/threads/openzfs-2-3-on-14-3-stable-boot-fails-with-zfs-unsupported-feature-org-openzfs-raidz_expansion-after-zpool-upgrade.98998/

I haven't a 4th disk.
The article is about raidz_expansion and gptzfsboot but I use the UEFI boot without raidz_expansion.

Recently, I fresh installed the 25.7 opnsense using zfs raidz1 with 3-disks for booting.
Unfortunately, the disk0 was failed and I rebooted the system today.
Now the system can't boot because the boot files in disk1 efi partition was wrong.
Those files were totally different with the disk0 in the efi partition and the disk1 efi partition only 779KB.
The disk3 efi partition was not recognized.
I need newfs_msdos -F32 -c 1 disk1 and cp the /boot/loader.efi to the efi partition to fix the boot problem.
After that, I can boot into system and replace the disk0 with the new disk.
What an amazing BUG this is!!!

I use the opnsense version 23.1.7_3.
Now I have two isp lines connected to internet with pppoe methond on the opnsense box.
I have set the ddclient with two dyndns records to Zoneedit DNS provider.
I found that two dyndns records had been pointed to same ip address. The ip address is the Main line. So the ddclient can't get the ip address of the Slave line.
Now I change the ddclient to DynDNS. That's working.

I found the DynFi Firewall.
https://dynfi.com/en/dynfi-firewall/
A fork of opnsense?

Everything is ok. Maybe your network has problems. Please check your network. Thank you.

We had upgraded our dedicated lines for the server of the Chinese mirror site. Now the HK and TW users can connect the server via HK-IX BGP dedicated lines. The mainland of china users can connect the server via CN2 BGP lines. Have a nice day!

Oh no~~~~~~~~~~~~

I don't want to reinstall the new system.

How to upgrade the OPNsense 16.1.20-amd64 to current production version 18.7？

Recently, my brother want  to make a opnsense box and conect my opnsense box with using GRE tunnel mode. Our opnsense boxes connected the internet with dynamic ip. But I don't know whether the gre tunnel support the dynamic ip. Did anybody try it?

Please port the new pf of openbsd6.1 to opnsense version 17.7! I need the founction af-to!

bartjsmit, the page is very userful. Thank you.

Animosity022, You are right! Thank you!

Versions    OPNsense 17.1.2-amd64
FreeBSD 11.0-RELEASE-p7
OpenSSL 1.0.2k 26 Jan 2017

I use the wizard to create a new OPENVPN server and add a user with  the certificate. But the system error when I want to use the Client Export. What's wrong? Does any new openvpn setup of User Manual that I can use?

The following input errors were detected:
Could not locate the CA reference for the server certificate.
Failed to export config files!

try lagg.

You can test the Nvidia Tegra platform with INTEL 4-PORT NIC.
http://www.nvidia.com/object/jetson-tx1-dev-kit.html