Messages

This worked very well!
Thank you very much!

Try this:

https://forum.opnsense.org/index.php?topic=45568.0

The part

Code Select Expand

hint.uart.0.at="isa"


Can be closed.

Hi,

i have some issues installing OPNSense on my APU Board.
I flashed my mSata and at some point the installation stops.

I tried 2 different mSATAs and even a USB Installation, 2 different Modem Cables.
I flashed with Rufus, dd and Etcher.
And 2 Diffrent Clients, Minicom and Putty.
I havent found anything(usefull) on google does anyone ever faced this problem?
The board i bought was used so maybe Hardware issue?

Thank you in advance.
Loading kernel...
/boot/kernel/kernel text=0x181ce8 text=0xe0fd78 text=0x45e00c data=0x180+0xe80 data=0x196780+0x469880 0x8+0x1a1c90+0x8+0x1c6c3f|
Loading configured modules...
can't find '/etc/hostid'
/boot/kernel/if_bridge.ko size 0xea58 at 0x2169000
loading required module 'bridgestp'
/boot/kernel/bridgestp.ko size 0x8930 at 0x2178000
/boot/kernel/pfsync.ko size 0x11a18 at 0x2181000
loading required module 'pf'
/boot/kernel/pf.ko size 0x8e3d8 at 0x2193000
/boot/kernel/pflog.ko size 0x3c10 at 0x2222000
/boot/kernel/if_lagg.ko size 0x165f0 at 0x2226000
loading required module 'if_infiniband'
/boot/kernel/if_infiniband.ko size 0x3540 at 0x223d000
/boot/kernel/if_gre.ko size 0xaa30 at 0x2241000
/boot/kernel/if_enc.ko size 0x4be0 at 0x224c000
/boot/kernel/carp.ko size 0xfba8 at 0x2251000
/boot/entropy size=0x1000
KDB: debugger backends: ddb
KDB: current backend: ddb
---<<BOOT>>---
Copyright (c) 1992-2023 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.2-RELEASE stable/25.1-n269614-36155813721 SMP amd64
FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67)
VT(vga): resolution 640x480
CPU: AMD G-T40E Processor (1000.03-MHz K8-class CPU)
  Origin="AuthenticAMD"  Id=0x500f20  Family=0x14  Model=0x2  Stepping=0
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x802209<SSE3,MON,SSSE3,CX16,POPCNT>
  AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
  AMD Features2=0x35ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,IBS,SKINIT,WDT>
  SVM: NP,NRIP,NAsids=8
  TSC: P-state invariant, performance statistics
real memory  = 2115428352 (2017 MB)
avail memory = 2012401664 (1919 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <CORE   COREBOOT>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
random: unblocking device.
ioapic0 <Version 2.1> irqs 0-23
Launching APs: 1
random: entropy device external interface
wlan: mac acl policy registered
kbd0 at kbdmux0
WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0.
vtvga0: <VT VGA driver>
smbios0: <System Management BIOS> at iomem 0xfd9d0-0xfd9ee
smbios0: Version: 2.7
aesni0: No AES or SHA support.
acpi0: <CORE COREBOOT>
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
apei0: <ACPI Platform Error Interface> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 450
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci1: <ACPI PCI bus> on pcib1
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x1000-0x10ff mem 0xfe600000-0xfe600fff,0xfe500000-0xfe503fff at device 0.0 on pci1
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x2c000000
re0: MAC rev. 0x00200000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-mastew
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 00:0d:b9:33:0a:18
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib2: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci2: <ACPI PCI bus> on pcib2
re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x2000-0x20ff mem 0xfe800000-0xfe800fff,0xfe700000-0xfe703fff at device 0.0 on pci2
re1: Using 1 MSI-X message
re1: ASPM disabled
re1: Chip rev. 0x2c000000
re1: MAC rev. 0x00200000
miibus1: <MII bus> on re1
rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1
rgephy1:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-mastew
re1: Using defaults for TSO: 65518/35/2048
re1: Ethernet address: 00:0d:b9:33:0a:19
re1: netmap queues/slots: TX 1/256, RX 1/256
pcib3: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci3: <ACPI PCI bus> on pcib3
re2: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xfea00000-0xfea00fff,0xfe900000-0xfe903fff at device 0.0 on pci3
re2: Using 1 MSI-X message
re2: ASPM disabled
re2: Chip rev. 0x2c000000
re2: MAC rev. 0x00200000
miibus2: <MII bus> on re2
rgephy2: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus2
rgephy2:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-mastew
re2: Using defaults for TSO: 65518/35/2048
re2: Ethernet address: 00:0d:b9:33:0a:1a
re2: netmap queues/slots: TX 1/256, RX 1/256
ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0x4020-0x4027,0x4040-0x4043,0x4028-0x402f,0x4044-0x4047,0x4000-0x400f mem 0xfeb08000-0xfeb083ff at device 17.0 on pci0
ahci0: AHCI v1.20 with 4 6Gbps ports, Port Multiplier supported
ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI>
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb04000-0xfeb04fff at device 18.0 on pci0
usbus0 on ohci0
usbus0: 12Mbps Full Speed USB v1.0
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb08400-0xfeb084ff at device 18.2 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb05000-0xfeb05fff at device 19.0 on pci0
usbus2 on ohci1
usbus2: 12Mbps Full Speed USB v1.0
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb08500-0xfeb085ff at device 19.2 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci1
usbus3: 480Mbps High Speed USB v2.0
atapci0: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x4010-0x401f at device 20.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pcib4: failed to allocate initial memory window: 0-0xfffff
pcib4: failed to allocate initial prefetch window: 0-0xfffff
pci4: <ACPI PCI bus> on pcib4
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb06000-0xfeb06fff at device 20.5 on pci0
usbus4 on ohci2
usbus4: 12Mbps Full Speed USB v1.0
pcib5: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pci5: <ACPI PCI bus> on pcib5
ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb07000-0xfeb07fff at device 22.0 on pci0
usbus5 on ohci3
usbus5: 12Mbps Full Speed USB v1.0
ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb08600-0xfeb086ff at device 22.2 on pci0
usbus6: EHCI version 1.0
usbus6 on ehci2
usbus6: 480Mbps High Speed USB v2.0
acpi_button0: <Power Button> on acpi0
orm0: <ISA Option ROM> at iomem 0xee000-0xeffff pnpid ORM0000 on isa0
Timecounter "TSC" frequency 999999809 Hz quality 800
Timecounters tick every 1.000 msec
ugen1.1: <ATI EHCI root HUB> at usbus1
ugen6.1: <ATI EHCI root HUB> at usbus6
uhub0 on usbus1
uhub1 on usbus6
uhub0: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
ugen5.1: <ATI OHCI root HUB> at usbus5
ugen2.1: <ATI OHCI root HUB> at usbus2
uhub2 on usbus5
uhub3 on usbus2
uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen0.1: <ATI OHCI root HUB> at usbus0
ugen4.1: <ATI OHCI root HUB> at usbus4
uhub4 on usbus0
uhub5 on usbus4
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen3.1: <ATI EHCI root HUB> at usbus3
uhub6 on usbus3
uhub6: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
Trying to mount root from ufs:/dev/ufs/OPNsense_Install [ro,noatime]...
uhub5: 2 ports with 2 removable, self powered
uhub2: 4 ports with 4 removable, self powered
uhub3: 5 ports with 5 removable, self powered
uhub4: 5 ports with 5 removable, self powered
Root mount waiting for: CAM usbus1 usbus3 usbus6
uhub1: 4 ports with 4 removable, self powered
uhub0: 5 ports with 5 removable, self powered
uhub6: 5 ports with 5 removable, self powered
ugen6.2: <Generic Flash Card Reader/Writer> at usbus6
umass0 on uhub1
umass0: <Generic Flash Card Reader/Writer, class 0/0, rev 2.01/1.00, addr 2> on usbus6
umass0:  SCSI over Bulk-Only; quirks = 0x4001
umass0:6:0: Attached to scbus6
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <BT58SSD08M HP36184P> ACS-4 ATA SATA 3.x device
ada0: Serial Number BM05035800093
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 4096bytes)
ada0: Command Queueing enabled
ada0: 122104MB (250069680 512 byte sectors)
da0 at umass-sim0 bus 0 scbus6 target 0 lun 0
da0: <Multiple Card  Reader 1.00> Removable Direct Access SPC-2 SCSI device
da0: Serial Number 058F63666485
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
re0: link state changed to DOWN
re1: link state changed to DOWN
re2: link state changed to DOWN
intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
lo0: link state changed to UP