"
Solved - enabling Install policy during phase 1- made a huge difference :-)
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages1
#1
Virtual private networks / Re: IPSEC Tunnel established but no communication
April 07, 2025, 02:31:02 PM #2
Virtual private networks / IPSEC Tunnel established but no communication
April 04, 2025, 04:06:51 PM
IPSEC site to site
I'm having an issue in getting the traffic coming through.
The tunnel is established, and VPN Status overview shows traffic in for both Phase 1 & 2 BUT nothing is going out.
OpnSense
Ipsec site to site (Legacy)
Wan .222
Lan 192.168.1.0/24
Remote
Wan .232
Lan 192.168.13.0/24
As shown from the log it looks as WAN from OPNSense is trying to send to the LAN on the other side (192.168.13.1). Should that be the public address instead as the LAN is unknow in public?
Ping in both direction shows up in the log and are passed but somehow it is not routed correctly back. I have tried both directions.
Nothing seems to be block according to both firewall logs.
Any idea is really apprciated.
Thanks,
Henrik
I'm having an issue in getting the traffic coming through.
The tunnel is established, and VPN Status overview shows traffic in for both Phase 1 & 2 BUT nothing is going out.
OpnSense
Ipsec site to site (Legacy)
Wan .222
Lan 192.168.1.0/24
Remote
Wan .232
Lan 192.168.13.0/24
As shown from the log it looks as WAN from OPNSense is trying to send to the LAN on the other side (192.168.13.1). Should that be the public address instead as the LAN is unknow in public?
Ping in both direction shows up in the log and are passed but somehow it is not routed correctly back. I have tried both directions.
Nothing seems to be block according to both firewall logs.
Any idea is really apprciated.
Thanks,
Henrik
Pages1
