Messages

Hi, i've tried to add a CA under Trust -> Authorities, after adding it the GUI would not start anymore saying that it had not enough memory. Although adding RAM to PHP doesn't solve the issue because it keep asking for more and more. ( See attachement )

Ok, well i've finally found the culpit my ISP rely havely on IPV6 and it was not configured which is why i had all those issues



Latency & speed are fixed after deploying ipv6 correctly

But it's not though ?, i should have way more bandwith even with real world usage, especially in VMs since its bridged directly to OPN. Using 10GB/S Hosting Server, i've tried to download 25G file i can't go higer than 500MB/S while being directly plugged to the ROUTER in BRIDGE mode i get over 1200-1700 MB/S i don't think this is normal behaviour

Well i mean i get the same result into the others VMs and on my Physical Computer

Hello, I'm looking for help regarding stability/speed problems on opnsense. I have a rather simple setup, I have a Proxmox ( quite powerful Ryzen 9 5950X, 64GB ram ) which has a 10G X550-T2 card from intel, in short I installed OPNsense on it using VirtIO drivers ( so I made 2 bridges on linux WAN, LAN associated to the physical ports of the card ) given that the Freebox POP (French ISP) has a 2,5GB/S port I plugged on it and I forced on proxmox the port in 2.5GB/S. I switched my router to bridge mode and installed opnsense. But I've got some problems, I'm not getting more than 890MBPS by doing a speedtest directly on the firewall. (I've included screenshots to back this up). Of course, I tested on a Linux VM, installed debian, assigned the WAN bridge and did a speedtest, reaching 2.2, 2.3GB/S each time. On top of that the TV Player makes a lot of random errors due to some weird network stabilities, thanks in advance for the help.

Bonjour, à tous je cherche de l'aide concernant des problèmes de stabilité/rapidité sur opnsense. J'ai un setup assez simple, j'ai un Proxmox ( assez performant Ryzen 9 5950X, 64GB de ram ) qui a une carte 10G X550-T2 de intel, bref j'ai installé OPNsense dessus en utilisant les drivers VirtIO ( donc j'ai fais 2 bridges sur linux WAN, LAN associé au ports physique de la carte ) étant donné que la Freebox POP à un port 2,5GB/S je me suis branché dessus et j'ai forcé sur proxmox le port en 2.5GB/S. J'ai passé ma box en mode bridge et j'ai installé opnsense. Mais j'ai quelque soucis, Je dépasse pas plus que 890MBPS en faisant un speedtest directement sur le par-feu. ( J'ai mis des captures d'écran à l'appui ). J'ai bien évidemment testé sur une VM linux j'ai installé debian assigné le bridge WAN et fais un speedtest j'atteins 2.2, 2.3GB/S à chaque fois. En plus de ça le player pop fais pas mal d'erreur aléatoire ( Du style DASH #0 ) ce genre de chose, merci d'avance pour l'aide.