Messages

Any idea why?. Can I activate logs?. Its not normal 2 GB of oncrease in 5 minutes?. Right?

No,

I have disabled unbound DNS Reporting, to see if this is the root case.

But I dont undrestand this bestial increase.

Every 24 hours ican see this behaviour in my firewall:


---- Muestra Sun Nov 30 10:00:42 CET 2025 ----
last pid: 72722;  load averages:  0.10,  0.10,  0.08  up 2+00:28:34    10:00:42
90 threads:    1 running, 88 sleeping, 1 zombie
CPU:  0.6% user,  0.0% nice,  0.4% system,  0.0% interrupt, 99.0% idle
Mem: 227M Active, 670M Inact, 2912M Wired, 56K Buf, 27G Free
ARC: 2105M Total, 1288M MFU, 660M MRU, 836K Anon, 23M Header, 130M Other
     1802M Compressed, 4146M Uncompressed, 2.30:1 Ratio
Swap: 8192M Total, 8192M Free

  PID USERNAME    PRI NICE   SIZE    RES STATE    C   TIME    WCPU COMMAND
80838 root         21    0   323M   235M kqread   5  13:02   0.20% /usr/local/bin/python3 /usr/local/opnsense/scripts/unbound/logger.py (python3.11){python3.11}

---- Muestra Sun Nov 30 10:00:50 CET 2025 ----
last pid: 30905;  load averages:  0.08,  0.10,  0.08  up 2+00:28:42    10:00:50
93 threads:    1 running, 92 sleeping
CPU:  0.6% user,  0.0% nice,  0.4% system,  0.0% interrupt, 99.0% idle
Mem: 235M Active, 670M Inact, 2912M Wired, 56K Buf, 27G Free
ARC: 2105M Total, 1289M MFU, 659M MRU, 1271K Anon, 23M Header, 130M Other
     1802M Compressed, 4146M Uncompressed, 2.30:1 Ratio
Swap: 8192M Total, 8192M Free

  PID USERNAME    PRI NICE   SIZE    RES STATE    C   TIME    WCPU COMMAND
  442 root         23    0    59M    34M accept   7   0:02   0.88% /usr/local/bin/php-cgi

---- Muestra Sun Nov 30 10:01:39 CET 2025 ----
last pid:  1475;  load averages:  1.33,  0.40,  0.19  up 2+00:29:31    10:01:39
91 threads:    1 running, 89 sleeping, 1 zombie
CPU:  0.6% user,  0.0% nice,  0.4% system,  0.0% interrupt, 99.0% idle
Mem: 236M Active, 2070M Inact, 4468M Wired, 56K Buf, 24G Free
ARC: 2190M Total, 1257M MFU, 776M MRU, 1576K Anon, 23M Header, 130M Other
     1799M Compressed, 4140M Uncompressed, 2.30:1 Ratio
Swap: 8192M Total, 8192M Free

  PID USERNAME    PRI NICE   SIZE    RES STATE    C   TIME    WCPU COMMAND
80838 root         63    0  1914M  1644M kqread   6  13:09  21.97% /usr/local/bin/python3 /usr/local/opnsense/scripts/unbound/logger.py (python3.11){python3.11}

---- Muestra Sun Nov 30 10:01:42 CET 2025 ----
last pid:  5519;  load averages:  1.33,  0.40,  0.19  up 2+00:29:34    10:01:42
90 threads:    1 running, 88 sleeping, 1 zombie
CPU:  0.6% user,  0.0% nice,  0.4% system,  0.0% interrupt, 99.0% idle
Mem: 236M Active, 2070M Inact, 4468M Wired, 56K Buf, 24G Free
ARC: 2190M Total, 1257M MFU, 776M MRU, 1576K Anon, 23M Header, 130M Other
     1799M Compressed, 4140M Uncompressed, 2.30:1 Ratio
Swap: 8192M Total, 8192M Free

  PID USERNAME    PRI NICE   SIZE    RES STATE    C   TIME    WCPU COMMAND
80838 root         39    0  1914M  1644M kqread   6  13:09  15.19% /usr/local/bin/python3 /usr/local/opnsense/scripts/unbound/logger.py (python3.11){python3.11}

---- Muestra Sun Nov 30 10:01:51 CET 2025 ----
last pid:  8403;  load averages:  1.21,  0.40,  0.19  up 2+00:29:43    10:01:51
90 threads:    1 running, 88 sleeping, 1 zombie
CPU:  0.6% user,  0.0% nice,  0.4% system,  0.0% interrupt, 99.0% idle
Mem: 233M Active, 2074M Inact, 4468M Wired, 56K Buf, 24G Free
ARC: 2186M Total, 1253M MFU, 776M MRU, 1576K Anon, 23M Header, 130M Other
     1797M Compressed, 4138M Uncompressed, 2.30:1 Ratio
Swap: 8192M Total, 8192M Free

  PID USERNAME    PRI NICE   SIZE    RES STATE    C   TIME    WCPU COMMAND
80838 root         39    0  1914M  1644M kqread   6  13:10   5.66% /usr/local/bin/python3 /usr/local/opnsense/scripts/unbound/logger.py (python3.11){python3.11}

Sizing in logger.py increase from 323 Mb to 1914Mb, is this normal?

Any recomandation?.

It´s increasing my memory usage too

Will you publish a hotfix?

Fear about it,

What do oyu recomend, Im using unifi switch new generation, with only two vlan, do we have problems?. Im right now on 25.7.2 and no issues

Ok, but it will alive to the changes in the GUI?

Hi,

I was in ISC DCHP, and as recomended moved to KEA DHCP V4, everything is working fina, but I need to setup an "Additional Options" in one of my static IP´s , and I don´t know where.

Please anybody that could tell how to include tese options permanent in KEA?

Any expectation to hacce a 25.7.1?. I´m in a 25.1.12 and close to lease for holidays. I know taht 25.7 is ok, but always I wait till publish a x.x.1 because in my case, mu knowledge in networks is limited and I want to avoid issues. 

Thanks for your feedback, I dont have microcode plugin installed, but reading this experiences, i will wait till see how this issue progress. I´m also based in intel,snfd I don´t want to restore the installation at all.

Hola

Se que igual lo habéis explicado varias veces pero no acabo de encontrar. Quiero cambiar mi router asus Que está conectado a una ont de movistar e instalar opnsense. De momento solo me interesa la conexión a internet sin DECO no VOIP. Tengo dudas de todos los pasos a realizar.  Y que no me
Deje ninguno.

Alguien que me
Pueda enviar guía o ayuda? 

Gracias