Messages

Hello All,

I've set up OpenVPN using the configurations provided.

Interface(WAN):127.20.63.xx
IPv4 Tunnel Network 10.0.5.0/24
Redirect Gateway: I do not use this option.
IPv4 Local Network: 192.168.21.0/24
IPv4 Remote Network: 127.20.65.xx/29

While the VPN connection functions properly for the local network, I'm encountering difficulties connecting to the remote network from the VPN to the Linux router. I've ensured that the router's IP address is configured in the VPN remote network options.

My objective is to establish a connection to the remote Linux router with the IP 127.20.65.xx/29 via OpenVPN.

Despite allowing the OpenVPN WAN IP and port on my Linux router, I'm unable to establish a connection via the VPN.

Both the OpenVPN and Remote Linux routers are located in separate locations.

Could you please assist me in resolving this issue?

Thanks

Dear Team,

I have configured OpenVPN on an OpnSense firewall server with the public IP address 11.121.XXXX. Additionally, I've set up a private networks on this LAN: 192.168.21.1.The OpnSense firewall is a separate hardware unit.

Furthermore, I've deployed a separate OpenSUSE router with the public IP address 2.195.XXXX. On this router, I've configured the LAN IP as 192.168.100.1, which serves as the internal system network access point. Currently, I'm able to access the router's private network via OpenVPN from an external network. Please check the attached network diagram screenshot.

Could you provide guidance on refining these configurations?

Thank you