Messages

Hi Kets_One
I configured in "DNS overs TLS" 2 server IP, I need to check 185.236.104.254 as primary and 8.8.8.8 as secondary.
I can't find inside how to set the priority

It is important that the DNS to be used is always 185.236.104.254. If it does not work 8.8.8.8 must be activated.

good evening,
I entered 2 DNS addresses in "Unbound DNS: DNS over TLS" and I need them to be processed with priority, so elect the primary and secondary.
If the first doesn't respond because it doesn't work, pass the execution to the second: can it be done?

This is a docker deployment you can run at probably any cloud hoster.

Thanks

sorry, is there anything that works in the cloud?

With a monitoring system like e.g. Uptime Kuma?

Thanks for the info, I'm looking for some documentation on the matter

I need to receive messages, via email or otherwise, when a firewall is down, has been restarted, or otherwise: how can I do this?
Thanks for your help.

Hi Patrick,
the device 192.168.12.20 have 192.168.12.254 as gateway, netmasks is /24

I have configured Lan1 192.168.10.254 and Lan2 192.168.12.254.
I have to access, according to LAN 1 to the Lan2 devices.

To do this I inserted the following rule on firewall, rules, lan1

Action: Pass
Interface: Lan1
Direction: in
Source: Lan1 net
Destination: lan2 net

Save, Apply

When I insert on browse the ip lan 2 192.168.12.20:88 : not access

What mistake do I make?

Good Morning,
I have problem to access on gui firewall when use Chrome, with other browser no problem

Thanks

I configured in gateway monitor ip (8.8.8.8) to check gateway.
Is there a parameter for interval (the time that passes for each check)

Hi,
is there a graphics app to control speed fans ?