Show Posts
1
Virtual private networks / WireGuard - Invalid handshake response
« on: January 29, 2024, 09:19:36 pm »
Hey together,
I search a lot on the internet but didn't found any solution. May you can assist me to get wirecast running.
Server - OPNsense on a VM
Client - Windows 11
Error Message on Client: "2024-01-29 21:06:56.537: [TUN] [Server_1] Handshake for peer 1 (45.157.*.*:51820) did not complete after 20 attempts, giving up"
The client didn't receive any package gut can sent them.
Server Config:
See attached screenshots
Client Config:
[Interface]
PrivateKey = uDl*************************aFo=
ListenPort = 21841
Address = 192.168.200.100/32
[Peer]
PublicKey = G**********************FA=
AllowedIPs = 192.168.200.0/24, 192.168.201.0/24
Endpoint = 45.157.*.*:51820
I hope that you have hints for me what I should check.
On the server unter VPN: WireGuard: Diagnose I can see send and received packages.
I search a lot on the internet but didn't found any solution. May you can assist me to get wirecast running.
Server - OPNsense on a VM
Client - Windows 11
Error Message on Client: "2024-01-29 21:06:56.537: [TUN] [Server_1] Handshake for peer 1 (45.157.*.*:51820) did not complete after 20 attempts, giving up"
The client didn't receive any package gut can sent them.
Server Config:
See attached screenshots
Client Config:
[Interface]
PrivateKey = uDl*************************aFo=
ListenPort = 21841
Address = 192.168.200.100/32
[Peer]
PublicKey = G**********************FA=
AllowedIPs = 192.168.200.0/24, 192.168.201.0/24
Endpoint = 45.157.*.*:51820
I hope that you have hints for me what I should check.
On the server unter VPN: WireGuard: Diagnose I can see send and received packages.