Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - w1ldthing

#1
So...
A wifi device connecting to 6 & 7 net can ping 6.6.6.47 no problem.
A wired device on 1 net can ping 6.6.6.47 no problem.
Multiple wired devices on 10 net cannot ping 6.6.6.47 with DEVICE NOT FOUND.
#2
No Issues net rules
#3
Yeh, IPs is on the To-Do list as they are a hang-over from when they were first setup and to help keep things straight in my head 10 = 10GbE, 1 = 1GbE, 6 = Wifi6, 7 = Wifi6 Guest.

Attached are the firewall rules, mostly the auto generated ones on both the issue and non issue net.
The only difference being the 10 has the Anti-Lockout.

The two manual rules both net's have are 1 to redirect certain devices to the VPN and the other to allow traffic between the various net's.
#4
Hi,
Opnsense install is installed and running fine, except since a clean restart / update (I think).

The weird thing that is now happening is that one particular subnet cannot talk to / ping x2 devices on a different subnet (PC to CAR BLACKVUE DASHCAM). Yet, the same subnet can talk to / ping any other device on all other subnets (not found a device I can't ping yet).

Any ideas where to begin looking or something obvious is at fault ?

This is my setup (which has worked without this issue in the past):
MODEM ----> OPNSENSE (WAN)

            OPNSENSE (LAN)          ----> 10.10.10.1 >---- 6.6.6.47 (CAN'T PING FROM 10.10.10.X)
                                                     >---- 6.6.6.48 (CAN   PING FROM 10.10.10.X)

            OPNSESNE (OPT1)         ----> 1.1.1.1    >---- 6.6.6.47 (CAN   PING FROM 1.1.1.X)
                                                     >---- 6.6.6.48 (CAN   PING FROM 1.1.1.X)

            OPNSENSE (OPT2 NO VLAN) ----> 6.6.6.1    >---- 6.6.6.47 (CAN   PING FROM 6.6.6.X)
                                                     >---- 6.6.6.48 (CAN   PING FROM 6.6.6.X)

            OPNSENSE (OPT2 VLAN 51) ----> 7.7.7.1    >---- 6.6.6.47 (CAN   PING FROM 7.7.7.X)
                                                     >---- 6.6.6.48 (CAN   PING FROM 7.7.7.X)


1st Image shows:

Last Row - 10.x.x.x can't ping 6.6.6.47
Rows 1 to 3 - 10.x.x.x can ping other devices on 6.x.x.x and 1.x.x.x
Rows 4 to 6 - 1.x.x.x, 6.x.x.x & 7.x.x.x can ping 6.6.6.47 fine where 10.x.x.x can't

2nd Image shows similar also: