Messages

Thank you many much,
I have config as normal, just change wan interface to pppoe and fill in user/password. anh i can connect now.

Thanks for your advise,
I will try this tonight,

Last time, i created vlan 11 on WAN interface as you said, but not lucky, It seems not dial up PPPoE
so may be i misunderstood you.
1. Do I need to create vlan 11 and tag on all AP, and WAN interface of OPNSENSE
2. or on ISP moderm, should i let vlan tag as its was, or i turn off it.
Thank you many much

Thanks for your advise,
I will try this tonight,

Hi all,
I have a situation in configuration PPPoE on opnsense.
Here is my diagram of network that its still working nomal:
ISP Moderm --- SW1 --- SW@ --- PROXMOX --- OPNSENSE Rounter

a. All sw hold 3 vlan (1 - 192.166.56.0/24, 2 - 172.16.100.0/24 and 3 - 192.0.2.0/24) Vlan 1 is managed by OPNSENSE, VLAN 2 is Guest and Vlan 3 is from ISP.
b. All vlan are trucking on one NIC on proxmox, (proxmox tag vlan 10)
c. Opnsense have tree interface created by proxmox. with vmbr 0 for WAN (192.168.56.0/24), vmbr0.10 for Lan (172.16.100.0/24) and last is for guest (192.0.2.0/24)

Everything worked  with ISP moderm dial up PPPoE.
Now I would like to using OPNsense dial up PPPoE but not work as bellow:
a. I config ISP to bridge mode (my ISP have vlan 11)
b. Config WAN: change from DHCP to PPPoE

So is there anythings that conflig in config, IMO i thing, should i change vlan 10 to vlan 11 and try to dial up PPPoE?
Please help me
Thanks