Messages

1

24.1 Legacy Series / Re: Ethernet port BCM57416 NetXtreme-E Dual-Media 10G RDMA Ethernet Controller.

« on: August 26, 2024, 09:13:38 am »

Good morning,

I just changed my internet provider and I have a 2.4Gb/s port

I have a category 8 ethernet cable but I always get 1Gbs instead of 2.4GB/s in WAN interface

Do you know what the problem could be?

The tunnable has been added.

Can you help me

2

Virtual private networks / Two wireguard active tunnel with same provider

« on: April 07, 2024, 09:45:18 am »

Hello, I wanted to know if it is possible to have two VPN tunnels with WireGuard active? What I would like is for one part of my network to go out through one country Spain the other through France. Does anyone know if it's possible? I use Surfshark as a VPN

3

24.1 Legacy Series / Re: Ethernet port BCM57416 NetXtreme-E Dual-Media 10G RDMA Ethernet Controller.

« on: February 07, 2024, 11:17:49 pm »

It's because I managed to connect to the GUI thanks to a friend who lent me a USB to Ethernet adapter. Because I couldn't do otherwise.

I am a novice excuse

4

French - Français / Re: Problème avec BCM57416 NetXtreme-E Dual-Media 10G RDMA Ethernet Controller

« on: February 07, 2024, 08:58:10 pm »

J´ai reussi

5

24.1 Legacy Series / Re: Ethernet port BCM57416 NetXtreme-E Dual-Media 10G RDMA Ethernet Controller.

« on: February 07, 2024, 08:57:23 pm »

I managed to connect with the GUI and create the Tunable.

if_bnxt_load=YES

6

24.1 Legacy Series / Re: Ethernet port BCM57416 NetXtreme-E Dual-Media 10G RDMA Ethernet Controller.

« on: February 07, 2024, 05:04:27 pm »

Problem solved

7

24.1 Legacy Series / Re: Ethernet port BCM57416 NetXtreme-E Dual-Media 10G RDMA Ethernet Controller.

« on: February 07, 2024, 05:04:02 pm »

Problem solved thanks a lot

8

Hardware and Performance / Re: [SOLVED] BCM57416 NetXtreme-E 10G RDMA Ethernet Controller not recognized

« on: February 07, 2024, 01:19:34 pm »

OPNsense not recognize the BCM57416 10G networks cards. I would like to know exactly how to make OPNSense activate the interfaces? Someone would have an OPNSEnse iso with the activation of interfaces. I'm a novice and I don't know how to create the Loader.conf.local file

9

24.1 Legacy Series / Re: Ethernet port BCM57416 NetXtreme-E Dual-Media 10G RDMA Ethernet Controller.

« on: February 07, 2024, 11:00:35 am »

yes, I receive a lot of emails but I can't tell if it addresses my problem

10

24.1 Legacy Series / Re: Ethernet port BCM57416 NetXtreme-E Dual-Media 10G RDMA Ethernet Controller.

« on: February 05, 2024, 10:53:40 pm »

It’s ok now ?
cibS@pcio: 0:28:0:
vendor
＝
•Intel
class=0x060400 rev=0x11 hdr=0x01 vendor=0x8086 device=0x7a38
class
Corporation'
subvendor=0×1043
＝
bridge
subdevice=0x8882
subclass
= PCI-PCI
cib6@pci0: 0:28:2:
vendor
=
'Intel Corporation'
class
class=0x060400 rev=0x11 hdr=0x01 vendor=0x8086 device=0x7a3a subvendor=0x1043
subdevice=0x8882
= bridge
subclass
= PCI-PCI
cib7Opci0:0:29:0:
vendor
' Intel
class
Corporation'
class=0x060400 rev=0x11 hdr=0x01 vendor=0x8086 device=0x7a36 subvendor=Dx1043
subdevice=0x8882
= bridge
subclass
= PCI-PCI
sabQ@pci0:0:31:0：
vendor
class=0x060100 rev=0x11 hdr=0×00 vendor=0x8086 device=0x7a06 subvendor=0x1043
Corporation'
class
= bridge
subclass
＝
jac0@pciO: 0:31:3:
vendor
＝
'Intel Corporation'
class=0x040300 rev=0x11 hdr=0x00 vendor=0x8086 device=0x7a50 subvendor=0x1043 subdevice=0x87fb
class
multimedia
subclass
HDA
эпе4@рсі0:0:31:4:
vendor
' Intel
class
= serial
subclass
class=0x0c0500
rev=0x11
Corporation'
hdr=0x00 vendor=0x8086 device=0x7a23 subvendor=0x1043
bus
subdevice=0x8882
= SMBus
neS@pciO:0:31:5:
vendor
class=0x0c8000
rev=0x11 hdr=0x00 vendor=0x8086
=
• Intel
Corporation'
device=0x7a24 subvendor=0x1043 subdevice=0×8882
class
= serial
one6@pci0:1:0:0：
bus
class=0×020000
rev=0x01
hdr=0x00 vendor=0x14e4 device=0x16d8 subvendor=0x14e4 subdevice=0x1593
vendor
=
' Broadcom
Inc.
and subsidiaries'
device
= ' BCM57416 Netxtreme-E
Dual-Media 10G RDMA Ethernet Controller'
class
＝
network
subclass
=
ethernet
one7@pciD:1:0:1：
c1ass=D×D20000
rev=0x01
hdr=0x00 vendor=0x14e4 device=0x16d8 subvendor=0x14e4 subdevice=0x1593
vendor
• Broadcom
Inc.
and subsidiaries'
device
= ' BCM57416 NetXtreme-E
Dual-Media 10G
RDMA Ethernet Controller'
class
= network
subclass
=
ethernet
mmeD@pci0:2:0:0：
class=0x010802 rev=0x01 hdr=0x00 vendor=0x2646 device=0x501c subvendor=0x2646 subdevice=0x501c
vendor
'Kingston Technology Company, Inc.'
class
subclass
mass storage
NVM
one8@pciD:5:0:0：
vendor device class
subclass
=
n+ลกDleoneo.~
class=0x020000 rev=0x05 hdr=0x00 vendor=0x10ec device=0x8125 subvendor=0x1043 subdevice=0x87d7
'Realtek
Semi conductor Co. :
' RTL8125 2. 5GbE Controller

11

24.1 Legacy Series / Re: Ethernet port BCM57416 NetXtreme-E Dual-Media 10G RDMA Ethernet Controller.

« on: February 05, 2024, 07:07:30 pm »

Mail send

12

24.1 Legacy Series / Re: Ethernet port BCM57416 NetXtreme-E Dual-Media 10G RDMA Ethernet Controller.

« on: February 04, 2024, 11:52:29 am »

I'd take this to the freebsd-net mailinglist in this case. Include the output of ˋpciconf -lvˋ in your mail.

Can help me to output this pciconf-lv ? Thanks

I have made this but don’t work.

System - Settings - Tunables


Add a new tunable:

Tunable: if_bnxt_load

Value:YES

Then reboot the machine.

13

Hardware and Performance / Re: Problem with BCM57416 NetXtreme-E Dual-Media 10G RDMA Ethernet Controller

« on: February 03, 2024, 03:32:10 am »

I did this but the interfaces are still not recognized.

14

24.1 Legacy Series / Ethernet port BCM57416 NetXtreme-E Dual-Media 10G RDMA Ethernet Controller.

« on: February 03, 2024, 12:13:44 am »

Hello, I have a problem with the installation of OPNSense 24.1. I am unable to activate the Ethernet port BCM57416 NetXtreme-E Dual-Media 10G RDMA Ethernet Controller. He doesn't recognize them, does anyone have a solution?

I try with this topic but don't understand .

https://forum.opnsense.org/index.php?topic=25039.0

Please help me.

15

French - Français / Re: Problème avec BCM57416 NetXtreme-E Dual-Media 10G RDMA Ethernet Controller

« on: February 03, 2024, 12:07:20 am »

PFSense les reconnais, je ne comprends pas