Messages

nobody knows?

On Wan of course I have a rule, I can connect but I have no access to the LAN except for the opnsense GUI

Hi, I've set up a WireGuard server, I can access the Opnsense site and it works my internet through the tunnel but I can't do anything to get to other addresses on the LAN for anything
opnsense lan adress 10.69.0.1
Tunel addres
172.24.69.1/24:51820

config for android phone
[Interface]
PrivateKey = key
Address = 172.24.69.4/32
DNS = 10.69.0.1

[Peer]
PublicKey = key
Endpoint = wan_adress:51820
AllowedIPs = 0.0.0.0/0,::/0

Rules for WG interfaces
included one the rest are tests of various guides

Hi today I switched Openvpn from Legacy to instances and noticed that it is slower than it was.
What is the problem?
What encryption does the new mode use? because I don't see an option to choose anywhere?
Is there no encryption at all?
Server in TAP mode

//edit
And is it possible to set up authentication without user and password?

Hi,
I want to use actions_openvpn.conf to restart openvpn server 1minute after boot but actions_openvpn.conf is not working how to fix it?

I solved the problem!   
I changed
In Systems>Settings>Tunables, I set net.link.bridge.pfil_member=0 and net.link.bridge.pfil_bridge=1. Otherwise, you will have to repeat the rules to allow traffic between bridge elements.

Found on this Forum but it took me a lot of time!

Hi, I have a problem with OpnSense or myself :D
The system is put on a KVM machine on Proxmox.
I set up an openvpn server and everything works but from the local network I can't get to any openvpn client address nor can I ping anything on the other side but from the opensense client side I can ping.
I also have a problem to get to the NAS set up on the other proxmox machine, as a VPN client I can from the local network I can't anymore   

Hi.
I also have this problem, I just installed OPNsense 24.1_1 and the problem still occurs.
Is there no solution for this?
Maybe ad hoc some script to restart OpenVPN service I don't know for example 2 minutes after start only how to make such?

Hi,

I have a problem with openvpn server.

I've been using the server for a long time, but about a month ago after a power outage the problem occurred and it has stayed that way.
OpenVpn is running on VM Proxmox but this does not pose a problem.
After rebooting the system, the openvpn server service starts, the clients seemingly connect, but nothing in them works, as if it does not pass the gateway.
You can neither load any page nor log into Opnsense.
Restarting the openvpn service helps

Logs in attachment