Messages

I depoly a blockchain machine in dmz host, but my wan ip address is isp private, upup plugin can't use in private ip, so i want to expose whole dmz host

在pfsense的1：1里面外部ip是有个'WAN address`下拉选项可以选择的，但是opnsense没有这个

wan ip是移动分配的私有动态ip，重启或者重连后会变化，在opnsense中1：1配置的外部ip只能选择单个主机或网络，填入这个wan ip，但是重启或者重连后wan ip又变化了，只能手动再修改，这个有什么好办法吗？

This is pfsense 1:1 doc, "1:1 NAT on the WAN IP, aka "DMZ" on Linksys"

https://docs.netgate.com/pfsense/en/latest/nat/1-1.html?highlight=one%20one#nat-on-the-wan-ip-aka-dmz-on-linksys

thanks for your reply, I want to fully expose my dmz host to internet, so i configure 1:1 nat on WAN ip address, and add firewall rules to translate wan ip address to dmz host. Because my wan ip address is dynamic and is isp private address, in pfsense i can choose 'WAN address' in 1:1, but opnsense don't have this item, i must input wan address manual.

Hi, My wan ip is isp private address, it's not static, e.g 10.52.105.13. I want to configure 1:1 use this ip to a internal ip(a dmz host 192.168.100.251), in pfsense i can choose 'WAN address' in drop down list in external ip, but in opnsense 1:1 external ip not have this item in drop down list, so i choose signal host and input '10.52.105.13', but when opnsense reboot or reconnect to internet the WAN ip address have changed, so must set new WAN ip address in 1:1 again, but this is stupid. Can anyone tell me how to configure 1:1 in this situation? Excuse me poor english, thanks.