Messages

What can i do about it?
thnx

This doesn't look related at all, attached kernel panic:

db:0:kdb.enter.default>  show pcpu
cpuid        = 2
dynamic pcpu = 0xfffffe0095bc69c0
curthread    = 0xfffffe00ef704900: pid 15917 tid 100461 critnest 2 "python3.9"
curpcb       = 0xfffffe00ef704e10
fpcurthread  = 0xfffffe00ef704900: pid 15917 "python3.9"
idlethread   = 0xfffffe0017905560: tid 100005 "idle: cpu2"
self         = 0xffffffff82c12000
curpmap      = 0xfffffe00ef6dd518
tssp         = 0xffffffff82c12384
rsp0         = 0xfffffe00ed6f0000
kcr3         = 0x2d71b1000
ucr3         = 0x2d7007000
scr3         = 0x2d7007000
gs32p        = 0xffffffff82c12404
ldt          = 0xffffffff82c12444
tss          = 0xffffffff82c12434
curvnet      = 0
db:0:kdb.enter.default>  bt
Tracing pid 15917 tid 100461 td 0xfffffe00ef704900
kdb_enter() at kdb_enter+0x37/frame 0xfffffe00ed6ef810
vpanic() at vpanic+0x182/frame 0xfffffe00ed6ef860
panic() at panic+0x43/frame 0xfffffe00ed6ef8c0
trap_fatal() at trap_fatal+0x387/frame 0xfffffe00ed6ef920
trap_pfault() at trap_pfault+0x4f/frame 0xfffffe00ed6ef980
calltrap() at calltrap+0x8/frame 0xfffffe00ed6ef980
--- trap 0xc, rip = 0xffffffff80d5310a, rsp = 0xfffffe00ed6efa50, rbp = 0xfffffe00ed6efb10 ---
cache_fplookup() at cache_fplookup+0x20a/frame 0xfffffe00ed6efb10
namei() at namei+0x124/frame 0xfffffe00ed6efbc0
kern_statat() at kern_statat+0xf6/frame 0xfffffe00ed6efd00
sys_fstatat() at sys_fstatat+0x2f/frame 0xfffffe00ed6efe00
amd64_syscall() at amd64_syscall+0x10c/frame 0xfffffe00ed6eff30
fast_syscall_common() at fast_syscall_common+0xf8/frame 0xfffffe00ed6eff30
--- syscall (552, FreeBSD ELF64, fstatat), rip = 0x825595b1a, rsp = 0x8209db9d8, rbp = 0x8209dbb00 ---

Hello,

I had the same issue, almost 2 or 3 times lost pppoe after latest update in a day. also my default gateway already checked. And have only 1 gateway
attached error log.
help would appreciated
thnx

thnx for reply.
the thing is, my switch has 8 gigabit ports, but my main pc and storage has 2.5g
so if i can i would try to benefit 2.5g ports on the n5105 device.
ll try my chance with bridge
thnx

hi all,

i am pretty new with opnsense, comin from pfsense. somethings quite diffrent.
have 2 questions if you may.
is it possible to assign 2 interfaces to 1 dhcp server?
and which option i should choose at hardware acceleration with Celeron N5105
thnx