Messages

1

24.7 Production Series / Re: WARNING: failed to start ntopng

« on: September 04, 2024, 07:00:56 pm »

I'm having the exact issue here. I just updated to 24.7.3_1 today. I don't use ntopng often, but it's nice to have when I need detailed network tracing for a device.

2

General Discussion / Re: OPNsense services failing

« on: May 06, 2023, 10:21:03 am »

Well, I tried the os-realtek-re plugin, and different RAM and it still bites the dust. Maybe it's the chipset, maybe it's the NIC drivers, but I'm not sure. It's still crashing. This exact hardware combo just might not be compatible.

3

General Discussion / Re: OPNsense services failing

« on: May 05, 2023, 11:28:52 pm »

Yes that other Realtek is the onboard. I used the 'realtek-re-kmod-198.00_1' package for the M.2 adapter that I added. I just looked and saw that other realtek plugin, so I'll add that(and update to 23.1.7_3 I guess haha).

4

General Discussion / Re: OPNsense services failing

« on: May 05, 2023, 10:50:15 pm »

Yeah I just did the builtin test. I remembered this was happening before I added the 2nd memory stick, so I pulled the original one to see if it happens again.
https://bsd-hardware.info/?probe=85256a78f6
Here's a hardware dump of the device. BIOS/UEFI is all the way up to date. This was an issue before I installed the RTL8125 interface.

5

General Discussion / Re: OPNsense services failing

« on: May 05, 2023, 09:50:11 pm »

I ran a full system test, including extended RAM, during the last reinstall. I do work at a college, so I could borrow a replacement set of sticks from the workstation guys, and swap them out as another test I guess, but I would think a memtest would throw an error. Temps and cpu usage are fine as well. It ran fine from about 8am to 1pm today.

6

General Discussion / OPNsense services failing

« on: May 04, 2023, 05:40:44 pm »

Hello all,
I have a weird one here. I just started using OPNsense on a Optiplex3060 that I installed an additional NIC into. The problem I am running into is that the webpage, prom exporter, and some other services all stop working occasionally(a few hours to a few days). Routing and the firewall are still functional, since I don't lose internet, but I can't get to the mgmt page. It also stops sending data to Prometheus. I have tried 2 different NVMe drives, run badblocks, tried UFS and ZFS, reinstalled 3 times, and I've dug through a ton of logs collected in logstash. I can't figure out what is going on with this thing. I disabled all services other than the basic routing and FW, and that made it last about 5 days, but it still stops responding. It seems like the more additional services that are running, the shorter the period. Other than rebooting it every night, what are my other troubleshooting options?
I am a Linux sysadmin, but I don't have much BSD experience.

Thanks in advance