Messages

Well, this little bugger was checked:



Unchecked and all seems normal so far.

But I swear I'm not sure how this got activated. I'm not really tinkering too much on the firewall.

First time I noticed there were issues, was when I was plying around with netboot.xyz and some machines could not download the environment.

Thanks for the tips. Once I get back to the PCs I will try your suggestions.

But, I did some tests. So, if I switch, ETH mac in the pool, and Wi-Fi static assigned, like 192.168.0.20 then things get switched.

No access to anything outside the pool for the ETH interface.

Inside the pool:

Code Select Expand

IPv4 Address. . . . . . . . . . . : 192.168.100.104(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . : 192.168.0.1
DHCP Server . . . . . . . . . . . : 192.168.0.1
DNS Servers . . . . . . . . . . . : 192.168.0.1


Hi,

192.168.0.1/16

Hi,

I have a very simple setup. On LAN, DHCP service giving IPs within 192.168.100.101 - 192.168.100.254 range.

Outside, I have static assigned IPs for a lot of MACs. The range for these static IPs is between 192.168.0.1 to 192.168.11.254.

LAN0 IP 192.168.0.1

I cannot from DHCP pool to outside and vice versa.

Is there a solution to this problem, other than extending the pool?

Thank you all!

I needed a GUI option, so I installed os-smart, it gives me the info I need.

But I can swear that in the past I was able to see my disk on the dashboard.

Code Select Expand

smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.2-RELEASE-p2 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Samsung based SSDs
Device Model:     Samsung SSD 850 EVO mSATA 250GB
Serial Number:    S33GNX0J723399R
LU WWN Device Id: 5 002538 d421fad13
Firmware Version: EMT41B6Q
User Capacity:    250,059,350,016 bytes [250 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      mSATA
TRIM Command:     Available
Device is:        In smartctl database 7.3/5528
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4c
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Tue Apr  8 08:55:02 2025 EEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled


Hi,

Is there a way to know from the GUI, what is the size of my disk?

All I see is the usage in %. But I need to know what is the size of my disk.