Messages

Short feedback and update!

After updating to OPNsense 24.7.12_2 the problem no longer occurs. Syslog and kernel log no longer show any error messages.

Kurzes Feedback und Aktualisierung!

Nach dem Update auf OPNsense 24.7.12_2 tritt das Problem erstmal nicht mehr auf. Syslog und Kernel-Log zeigen keine Fehlermeldungen mehr.

Hello community,

I need your help. My Opnsense simply reboots every 5-6 days. I have been able to read a similar problem in the forum for older versions, but without a helpful approach to my problem. I can provide the following information/ CrashDump. I have uninstalled unnecessary extensions.

My Hardware is a ZBOX CI327 Nano ZBOX

Code Select Expand

Dump header from device: /dev/gpt/swapfs
  Architecture: amd64
  Architecture Version: 4
  Dump Length: 108544
  Blocksize: 512
  Compression: none
  Dumptime: 2025-01-06 07:34:05 +0100
  Hostname: opnsense.work.lan
  Magic: FreeBSD Text Dump
  Version String: FreeBSD 14.1-RELEASE-p6 stable/24.7-n267981-8375762712f SMP
  Panic String: page fault
  Dump Parity: 1316052285
  Bounds: 0
  Dump Status: good


Code Select Expand

Fatal trap 12: page fault while in kernel mode
cpuid = 1; apic id = 02
fault virtual address   = 0x0
fault code              = supervisor read data, page not present
instruction pointer     = 0x20:0xffffffff80f6bdb3
stack pointer           = 0x0:0xfffffe00af62cc50
frame pointer           = 0x0:0xfffffe00af62cc50
code segment            = base 0x0, limit 0xfffff, type 0x1b
                        = DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags        = interrupt enabled, resume, IOPL = 0
current process         = 45427 (python3.11)
rdi: fffff8018d893688 rsi: 0000000000000001 rdx: 0000000000000000
rcx: 000000000000000c  r8: fffff80211724000  r9: 0000000000000080
rax: 0000000000000000 rbx: fffff80211724000 rbp: fffffe00af62cc50
r10: fffff80002ac7400 r11: 0000000000000000 r12: fffff80211724000
r13: 0000000000000000 r14: fffffe00af62cf00 r15: fffff8018d893630
trap number             = 12
panic: page fault
cpuid = 1
time = 1736145245
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe00af62c940
vpanic() at vpanic+0x131/frame 0xfffffe00af62ca70
panic() at panic+0x43/frame 0xfffffe00af62cad0
trap_fatal() at trap_fatal+0x40b/frame 0xfffffe00af62cb30
trap_pfault() at trap_pfault+0x46/frame 0xfffffe00af62cb80
calltrap() at calltrap+0x8/frame 0xfffffe00af62cb80
--- trap 0xc, rip = 0xffffffff80f6bdb3, rsp = 0xfffffe00af62cc50, rbp = 0xfffffe00af62cc50 ---
vm_radix_lookup() at vm_radix_lookup+0x13/frame 0xfffffe00af62cc50
vm_fault() at vm_fault+0x71c/frame 0xffffffff80f44309
KDB: enter: panic

dmesg output

Code Select Expand

---<<BOOT>>---
Copyright (c) 1992-2023 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
    The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.1-RELEASE-p6 stable/24.7-n267981-8375762712f SMP amd64
FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9)
VT(efifb): resolution 1680x1050
CPU: Intel(R) Celeron(R) CPU N3450 @ 1.10GHz (1094.40-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x506c9  Family=0x6  Model=0x5c  Stepping=9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x101<LAHF,Prefetch>
  Structured Extended Features=0x2294e283<FSGSBASE,TSCADJ,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA>
  Structured Extended Features3=0x2c000000<IBPB,STIBP,ARCH_CAP>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  IA32_ARCH_CAPS=0x1<RDCL_NO>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8091561984 (7716 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <INTEL  EDK2    >
WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-119
Launching APs: 3 1 2
random: entropy device external interface
wlan: mac acl policy registered
kbd1 at kbdmux0
WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0.
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
smbios0: <System Management BIOS> at iomem 0x798ef000-0x798ef01e
smbios0: Version: 3.0, BCD Revision: 3.0
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
acpi0: <ALASKA A M I >
acpi0: Power Button (fixed)
unknown: I/O range not supported
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0
Timecounter "HPET" frequency 19200000 Hz quality 950
Event timer "HPET" frequency 19200000 Hz quality 550
Event timer "HPET1" frequency 19200000 Hz quality 440
Event timer "HPET2" frequency 19200000 Hz quality 440
Event timer "HPET3" frequency 19200000 Hz quality 440
Event timer "HPET4" frequency 19200000 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0x90000000-0x90ffffff,0x80000000-0x8fffffff at device 2.0 on pci0
vgapci0: Boot video device
hdac0: <Intel Broxton-P HDA Controller> mem 0x91410000-0x91413fff,0x91000000-0x910fffff irq 25 at device 14.0 on pci0
pci0: <simple comms> at device 15.0 (no driver attached)
ahci0: <Intel Apollo Lake AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0x91414000-0x91415fff,0x9141c000-0x9141c0ff,0x9141b000-0x9141b7ff at device 18.0 on pci0
ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
pcib1: <ACPI PCI-PCI bridge> at device 19.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <network> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 19.2 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0x91204000-0x91204fff,0x91200000-0x91203fff at device 0.0 on pci2
re0: Using 1 MSI-X message
re0: turning off MSI enable bit.
re0: ASPM disabled
re0: Chip rev. 0x4c000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 00:01:2e:82:20:52
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib3: <ACPI PCI-PCI bridge> at device 20.0 on pci0
pci3: <ACPI PCI bus> on pcib3
re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0x91104000-0x91104fff,0x91100000-0x91103fff at device 0.0 on pci3
re1: Using 1 MSI-X message
re1: turning off MSI enable bit.
re1: ASPM disabled
re1: Chip rev. 0x4c000000
re1: MAC rev. 0x00000000
miibus1: <MII bus> on re1
rgephy1: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus1
rgephy1:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re1: Using defaults for TSO: 65518/35/2048
re1: Ethernet address: 00:01:2e:82:20:53
re1: netmap queues/slots: TX 1/256, RX 1/256
xhci0: <Intel Apollo Lake USB 3.0 controller> mem 0x91400000-0x9140ffff irq 17 at device 21.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
sdhci_pci0: <Intel Apollo Lake eMMC 5.0 Controller> mem 0x9141a000-0x9141afff,0x91419000-0x91419fff irq 39 at device 28.0 on pci0
sdhci_pci0: 1 slot(s) allocated
mmc0: <MMC/SD bus> on sdhci_pci0
sdhci_pci1: <Generic SD HCI> mem 0x91418000-0x91418fff,0x91417000-0x91417fff irq 42 at device 30.0 on pci0
sdhci_pci1: 1 slot(s) allocated
mmc1: <MMC/SD bus> on sdhci_pci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounter "TSC" frequency 1094400190 Hz quality 1000
Timecounters tick every 1.000 msec
ugen0.1: <Intel XHCI root HUB> at usbus0
hdacc0: <Realtek ALC892 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC892 (Left Analog)> at nid 20 and 24 on hdaa0
pcm1: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa0
hdacc1: <Intel Broxton HDA CODEC> at cad 2 on hdac0
hdaa1: <Intel Broxton Audio Function Group> at nid 1 on hdacc1
pcm2: <Intel Broxton (HDMI/DP 8ch)> at nid 3 on hdaa1
uhub0 on usbus0
uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
mmc0: No compatible cards found on bus
mmc1: No compatible cards found on bus
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <KINGSTON SV300S37A120G 60AABBF0> ATA8-ACS SATA 3.x device
ada0: Serial Number 50026B7238038D3E
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 114473MB (234441648 512 byte sectors)
Trying to mount root from ufs:/dev/gpt/rootfs [rw]...
uhub0: 15 ports with 15 removable, self powered
ugen0.2: <vendor 0x8087 product 0x0a2a> at usbus0
ugen0.3: <Generic USB2.0-CRW> at usbus0
umass0 on uhub0
umass0: <Generic USB2.0-CRW, class 0/0, rev 2.00/57.13, addr 2> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0x4000
umass0:2:0: Attached to scbus2
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: <Generic- SD/MMC/MS PRO 1.00> Removable Direct Access SPC-2 SCSI device
da0: Serial Number 20120926571200000
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>
ugen0.4: <Logitech Logitech Illuminated Keyboard> at usbus0
ukbd0 on uhub0
ukbd0: <Logitech Logitech Illuminated Keyboard, class 0/0, rev 2.00/55.03, addr 3> on usbus0
kbd2 at ukbd0
re0: link state changed to UP
re1: link state changed to UP
Intel(R) Wireless WiFi based driver for FreeBSD
iwm0: <Intel(R) Dual Band Wireless AC 3165> mem 0x91300000-0x91301fff at device 0.0 on pci1
iwm0: hw rev 0x210, fw ver 22.361476.0, address 00:e1:8c:3b:6e:bf
ichsmb0: <Intel Broxton SMBus controller> port 0xf040-0xf05f mem 0x91416000-0x914160ff at device 31.1 on pci0
pcib0: no PRT entry for 0.31.INTA
ichsmb0: can't get IRQ
device_attach: ichsmb0 attach returned 6
ugen0.2: <vendor 0x8087 product 0x0a2a> at usbus0 (disconnected)
ugen0.2: <vendor 0x8087 product 0x0a2a> at usbus0
uhid0 on uhub0
uhid0: <Logitech Logitech Illuminated Keyboard, class 0/0, rev 2.00/55.03, addr 3> on usbus0
lo0: link state changed to UP
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
pflog0: permanently promiscuous mode enabled
re0: link state changed to DOWN
vlan0: changing name to 'vlan0.1.9.60'
vlan1: changing name to 'vlan0.1.9.64'
re1: link state changed to DOWN
re0: link state changed to UP
vlan0.1.9.64: link state changed to UP
vlan0.1.9.60: link state changed to UP
re1: link state changed to UP
wg0: changing name to 'wg1'
wg1: link state changed to UP
pid 6733 (python3.11), jid 0, uid 0: exited on signal 11 (no core dump - bad address)


Fatal trap 12: page fault while in kernel mode
cpuid = 1; apic id = 02
fault virtual address    = 0xffffee0599a08737
fault code        = supervisor read data, page not present
instruction pointer    = 0x20:0xffffffff80c84193
stack pointer            = 0x28:0xfffffe00ad6d5a00
frame pointer            = 0x28:0xfffffe00ad6d5ac0
code segment        = base 0x0, limit 0xfffff, type 0x1b
            = DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags    = interrupt enabled, resume, IOPL = 0
current process        = 60435 (rrdtool)
rdi: 000000000000002f rsi: 00000000f6d31570 rdx: fffff8006ee50804
rcx: fffffe00ad6d5d20  r8: 00000000f6d31502  r9: fffff80178a46c60
rax: fffffe00ad6d5ca0 rbx: fffffe00ad6d5ca0 rbp: fffffe00ad6d5ac0
r10: fffff80002704f30 r11: fffff80178a46c60 r12: fffffe00ad6d5ad4
r13: 0000000000000400 r14: 0000000000000400 r15: fffffe00ad6d5d58
trap number        = 12
panic: page fault
cpuid = 1
time = 1735205402
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe00ad6d56f0
vpanic() at vpanic+0x131/frame 0xfffffe00ad6d5820
panic() at panic+0x43/frame 0xfffffe00ad6d5880
trap_fatal() at trap_fatal+0x40b/frame 0xfffffe00ad6d58e0
trap_pfault() at trap_pfault+0x46/frame 0xfffffe00ad6d5930
calltrap() at calltrap+0x8/frame 0xfffffe00ad6d5930
--- trap 0xc, rip = 0xffffffff80c84193, rsp = 0xfffffe00ad6d5a00, rbp = 0xfffffe00ad6d5ac0 ---
cache_fplookup() at cache_fplookup+0x2e3/frame 0xfffffe00ad6d5ac0
namei() at namei+0x112/frame 0xfffffe00ad6d5b20
vn_open_cred() at vn_open_cred+0x53a/frame 0xfffffe00ad6d5c90
openatfp() at openatfp+0x268/frame 0xfffffe00ad6d5de0
sys_open() at sys_open+0x28/frame 0xfffffe00ad6d5e00
amd64_syscall() at amd64_syscall+0x100/frame 0xfffffe00ad6d5f30
fast_syscall_common() at fast_syscall_common+0xf8/frame 0xfffffe00ad6d5f30
--- syscall (5, FreeBSD ELF64, open), rip = 0x8263843da, rsp = 0x820a6d208, rbp = 0x820a6d3b0 ---
KDB: enter: panic
---<<BOOT>>---
Copyright (c) 1992-2023 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
    The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.1-RELEASE-p6 stable/24.7-n267981-8375762712f SMP amd64
FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9)
VT(efifb): resolution 1680x1050
CPU: Intel(R) Celeron(R) CPU N3450 @ 1.10GHz (1094.40-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x506c9  Family=0x6  Model=0x5c  Stepping=9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x101<LAHF,Prefetch>
  Structured Extended Features=0x2294e283<FSGSBASE,TSCADJ,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA>
  Structured Extended Features3=0x2c000000<IBPB,STIBP,ARCH_CAP>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  IA32_ARCH_CAPS=0x1<RDCL_NO>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8091561984 (7716 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <INTEL  EDK2    >
WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-119
Launching APs: 2 1 3
random: entropy device external interface
wlan: mac acl policy registered
kbd1 at kbdmux0
WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0.
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
smbios0: <System Management BIOS> at iomem 0x798ef000-0x798ef01e
smbios0: Version: 3.0, BCD Revision: 3.0
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
acpi0: <ALASKA A M I >
acpi0: Power Button (fixed)
unknown: I/O range not supported
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0
Timecounter "HPET" frequency 19200000 Hz quality 950
Event timer "HPET" frequency 19200000 Hz quality 550
Event timer "HPET1" frequency 19200000 Hz quality 440
Event timer "HPET2" frequency 19200000 Hz quality 440
Event timer "HPET3" frequency 19200000 Hz quality 440
Event timer "HPET4" frequency 19200000 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0x90000000-0x90ffffff,0x80000000-0x8fffffff at device 2.0 on pci0
vgapci0: Boot video device
hdac0: <Intel Broxton-P HDA Controller> mem 0x91410000-0x91413fff,0x91000000-0x910fffff irq 25 at device 14.0 on pci0
pci0: <simple comms> at device 15.0 (no driver attached)
ahci0: <Intel Apollo Lake AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0x91414000-0x91415fff,0x9141c000-0x9141c0ff,0x9141b000-0x9141b7ff at device 18.0 on pci0
ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
pcib1: <ACPI PCI-PCI bridge> at device 19.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <network> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 19.2 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0x91204000-0x91204fff,0x91200000-0x91203fff at device 0.0 on pci2
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x4c000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 00:01:2e:82:20:52
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib3: <ACPI PCI-PCI bridge> at device 20.0 on pci0
pci3: <ACPI PCI bus> on pcib3
re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0x91104000-0x91104fff,0x91100000-0x91103fff at device 0.0 on pci3
re1: Using 1 MSI-X message
re1: ASPM disabled
re1: Chip rev. 0x4c000000
re1: MAC rev. 0x00000000
miibus1: <MII bus> on re1
rgephy1: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus1
rgephy1:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re1: Using defaults for TSO: 65518/35/2048
re1: Ethernet address: 00:01:2e:82:20:53
re1: netmap queues/slots: TX 1/256, RX 1/256
xhci0: <Intel Apollo Lake USB 3.0 controller> mem 0x91400000-0x9140ffff irq 17 at device 21.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
sdhci_pci0: <Intel Apollo Lake eMMC 5.0 Controller> mem 0x9141a000-0x9141afff,0x91419000-0x91419fff irq 39 at device 28.0 on pci0
sdhci_pci0: 1 slot(s) allocated
mmc0: <MMC/SD bus> on sdhci_pci0
sdhci_pci1: <Generic SD HCI> mem 0x91418000-0x91418fff,0x91417000-0x91417fff irq 42 at device 30.0 on pci0
sdhci_pci1: 1 slot(s) allocated
mmc1: <MMC/SD bus> on sdhci_pci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounter "TSC" frequency 1094400037 Hz quality 1000
Timecounters tick every 1.000 msec
ugen0.1: <Intel XHCI root HUB> at usbus0
hdacc0: <Realtek ALC892 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC892 (Left Analog)> at nid 20 and 24 on hdaa0
pcm1: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa0
hdacc1: <Intel Broxton HDA CODEC> at cad 2 on hdac0
hdaa1: <Intel Broxton Audio Function Group> at nid 1 on hdacc1
pcm2: <Intel Broxton (HDMI/DP 8ch)> at nid 3 on hdaa1
uhub0 on usbus0
uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
mmc0: No compatible cards found on bus
mmc1: No compatible cards found on bus
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <KINGSTON SV300S37A120G 60AABBF0> ATA8-ACS SATA 3.x device
ada0: Serial Number 50026B7238038D3E
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 114473MB (234441648 512 byte sectors)
Trying to mount root from ufs:/dev/gpt/rootfs [rw]...
WARNING: / was not properly dismounted
uhub0: 15 ports with 15 removable, self powered
ugen0.2: <vendor 0x8087 product 0x0a2a> at usbus0
ugen0.3: <Generic USB2.0-CRW> at usbus0
umass0 on uhub0
umass0: <Generic USB2.0-CRW, class 0/0, rev 2.00/57.13, addr 2> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0x4000
umass0:2:0: Attached to scbus2
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: <Generic- SD/MMC/MS PRO 1.00> Removable Direct Access SPC-2 SCSI device
da0: Serial Number 20120926571200000
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>
ugen0.4: <Logitech Logitech Illuminated Keyboard> at usbus0
ukbd0 on uhub0
ukbd0: <Logitech Logitech Illuminated Keyboard, class 0/0, rev 2.00/55.03, addr 3> on usbus0
kbd2 at ukbd0
re0: link state changed to UP
re1: link state changed to UP
Intel(R) Wireless WiFi based driver for FreeBSD
iwm0: <Intel(R) Dual Band Wireless AC 3165> mem 0x91300000-0x91301fff at device 0.0 on pci1
iwm0: hw rev 0x210, fw ver 22.361476.0, address 00:e1:8c:3b:6e:bf
ichsmb0: <Intel Broxton SMBus controller> port 0xf040-0xf05f mem 0x91416000-0x914160ff at device 31.1 on pci0
pcib0: no PRT entry for 0.31.INTA
ichsmb0: can't get IRQ
device_attach: ichsmb0 attach returned 6
ng_ubt: HCI command 0x0c03 timed out
uhid0 on uhub0
uhid0: <Logitech Logitech Illuminated Keyboard, class 0/0, rev 2.00/55.03, addr 3> on usbus0
lo0: link state changed to UP
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
ng_ubt: HCI command 0x0c03 timed out
pflog0: permanently promiscuous mode enabled
re0: link state changed to DOWN
vlan0: changing name to 'vlan0.1.9.60'
vlan1: changing name to 'vlan0.1.9.64'
re1: link state changed to DOWN
re0: link state changed to UP
vlan0.1.9.64: link state changed to UP
vlan0.1.9.60: link state changed to UP
re1: link state changed to UP
wg0: changing name to 'wg1'
wg1: link state changed to UP


Fatal trap 12: page fault while in kernel mode
cpuid = 1; apic id = 02
fault virtual address    = 0x21
fault code        = supervisor write data, page not present
instruction pointer    = 0x20:0xffffffff80bb06a4
stack pointer            = 0x28:0xfffffe00aec45ac0
frame pointer            = 0x28:0xfffffe00aec45ac0
code segment        = base 0x0, limit 0xfffff, type 0x1b
            = DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags    = interrupt enabled, resume, IOPL = 0
current process        = 38210 (php)
rdi: fffff80002cbf840 rsi: fffff801bbe14000 rdx: fffff80033c1d130
rcx: 0000000000000001  r8: 0000000000000001  r9: fffffe00aec45a00
rax: 0000000000000021 rbx: 0000000000063000 rbp: fffffe00aec45ac0
r10: 0000000000000001 r11: 0000000838753000 r12: fffff801a3ea7b40
r13: fffff801720b1060 r14: 0000000000000000 r15: fffff80002cbf840
trap number        = 12
panic: page fault
cpuid = 1
time = 1735654140
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe00aec457b0
vpanic() at vpanic+0x131/frame 0xfffffe00aec458e0
panic() at panic+0x43/frame 0xfffffe00aec45940
trap_fatal() at trap_fatal+0x40b/frame 0xfffffe00aec459a0
trap_pfault() at trap_pfault+0x46/frame 0xfffffe00aec459f0
calltrap() at calltrap+0x8/frame 0xfffffe00aec459f0
--- trap 0xc, rip = 0xffffffff80bb06a4, rsp = 0xfffffe00aec45ac0, rbp = 0xfffffe00aec45ac0 ---
_rw_runlock_cookie_int() at _rw_runlock_cookie_int+0x34/frame 0xfffffe00aec45ac0
vm_map_insert1() at vm_map_insert1+0x46b/frame 0xfffffe00aec45b50
vm_map_fixed() at vm_map_fixed+0x18e/frame 0xfffffe00aec45bd0
vm_mmap_object() at vm_mmap_object+0x1ca/frame 0xfffffe00aec45c50
vn_mmap() at vn_mmap+0x14e/frame 0xfffffe00aec45ce0
kern_mmap() at kern_mmap+0x58d/frame 0xfffffe00aec45dc0
sys_mmap() at sys_mmap+0x42/frame 0xfffffe00aec45e00
amd64_syscall() at amd64_syscall+0x100/frame 0xfffffe00aec45f30
fast_syscall_common() at fast_syscall_common+0xf8/frame 0xfffffe00aec45f30
--- syscall (477, FreeBSD ELF64, mmap), rip = 0x2d4ff5fff04a, rsp = 0x821381918, rbp = 0x821381a80 ---
KDB: enter: panic


[Schnittstellen -> Diagnose -> Paketaufzeichnung]

Ich kann im Moment noch nicht viel zu Deiner Problematik beitragen, aber vllt. hilft Dir folgender Tipp zur weiteren Untersuchung

Warum nutzt Du nicht Diagnose Tools onboard?

Schnittstellen -> Diagnose -> Paketaufzeichnung

da das richtige Interface auswählen, mitschneiden und später in Wireshark analysieren

Für weitere Informationen wird der Hersteller und Software-Stand benötigt. Schon mal vorab! Eine VLAN (tagged/untagged) Konfiguration findet man nur im professionellen Bereich (z.Bsp. Unifi) oder in der alternativen WLAN-Router Software openwrt. Ein VLAN tauglicher Switch zur Trennung der Segmente ist auch sehr hilfreich.

Hallo Community,

ich benötige mal Eure Hilfe. Meine Opnsense rebootet alle 5-6 Tage einfach neu. Im Forum habe ich zu älteren Versionen ein ähnliches Problem lesen können, aber ohne hilfreichen Ansatz auf mein Problem. Folgende Infos/ CrashDump kann ich liefern. Unnötige Erweiterungen habe ich erstmal deinstalliert.

Hardware ist eine ZBOX CI327 Nano ZBOX

Code Select Expand

Dump header from device: /dev/gpt/swapfs
  Architecture: amd64
  Architecture Version: 4
  Dump Length: 108544
  Blocksize: 512
  Compression: none
  Dumptime: 2025-01-06 07:34:05 +0100
  Hostname: opnsense.work.lan
  Magic: FreeBSD Text Dump
  Version String: FreeBSD 14.1-RELEASE-p6 stable/24.7-n267981-8375762712f SMP
  Panic String: page fault
  Dump Parity: 1316052285
  Bounds: 0
  Dump Status: good


Code Select Expand

Fatal trap 12: page fault while in kernel mode
cpuid = 1; apic id = 02
fault virtual address   = 0x0
fault code              = supervisor read data, page not present
instruction pointer     = 0x20:0xffffffff80f6bdb3
stack pointer           = 0x0:0xfffffe00af62cc50
frame pointer           = 0x0:0xfffffe00af62cc50
code segment            = base 0x0, limit 0xfffff, type 0x1b
                        = DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags        = interrupt enabled, resume, IOPL = 0
current process         = 45427 (python3.11)
rdi: fffff8018d893688 rsi: 0000000000000001 rdx: 0000000000000000
rcx: 000000000000000c  r8: fffff80211724000  r9: 0000000000000080
rax: 0000000000000000 rbx: fffff80211724000 rbp: fffffe00af62cc50
r10: fffff80002ac7400 r11: 0000000000000000 r12: fffff80211724000
r13: 0000000000000000 r14: fffffe00af62cf00 r15: fffff8018d893630
trap number             = 12
panic: page fault
cpuid = 1
time = 1736145245
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe00af62c940
vpanic() at vpanic+0x131/frame 0xfffffe00af62ca70
panic() at panic+0x43/frame 0xfffffe00af62cad0
trap_fatal() at trap_fatal+0x40b/frame 0xfffffe00af62cb30
trap_pfault() at trap_pfault+0x46/frame 0xfffffe00af62cb80
calltrap() at calltrap+0x8/frame 0xfffffe00af62cb80
--- trap 0xc, rip = 0xffffffff80f6bdb3, rsp = 0xfffffe00af62cc50, rbp = 0xfffffe00af62cc50 ---
vm_radix_lookup() at vm_radix_lookup+0x13/frame 0xfffffe00af62cc50
vm_fault() at vm_fault+0x71c/frame 0xffffffff80f44309
KDB: enter: panic

dmesg output

Code Select Expand

---<<BOOT>>---
Copyright (c) 1992-2023 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.1-RELEASE-p6 stable/24.7-n267981-8375762712f SMP amd64
FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9)
VT(efifb): resolution 1680x1050
CPU: Intel(R) Celeron(R) CPU N3450 @ 1.10GHz (1094.40-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x506c9  Family=0x6  Model=0x5c  Stepping=9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x101<LAHF,Prefetch>
  Structured Extended Features=0x2294e283<FSGSBASE,TSCADJ,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA>
  Structured Extended Features3=0x2c000000<IBPB,STIBP,ARCH_CAP>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  IA32_ARCH_CAPS=0x1<RDCL_NO>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8091561984 (7716 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <INTEL  EDK2    >
WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-119
Launching APs: 3 1 2
random: entropy device external interface
wlan: mac acl policy registered
kbd1 at kbdmux0
WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0.
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
smbios0: <System Management BIOS> at iomem 0x798ef000-0x798ef01e
smbios0: Version: 3.0, BCD Revision: 3.0
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
acpi0: <ALASKA A M I >
acpi0: Power Button (fixed)
unknown: I/O range not supported
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0
Timecounter "HPET" frequency 19200000 Hz quality 950
Event timer "HPET" frequency 19200000 Hz quality 550
Event timer "HPET1" frequency 19200000 Hz quality 440
Event timer "HPET2" frequency 19200000 Hz quality 440
Event timer "HPET3" frequency 19200000 Hz quality 440
Event timer "HPET4" frequency 19200000 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0x90000000-0x90ffffff,0x80000000-0x8fffffff at device 2.0 on pci0
vgapci0: Boot video device
hdac0: <Intel Broxton-P HDA Controller> mem 0x91410000-0x91413fff,0x91000000-0x910fffff irq 25 at device 14.0 on pci0
pci0: <simple comms> at device 15.0 (no driver attached)
ahci0: <Intel Apollo Lake AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0x91414000-0x91415fff,0x9141c000-0x9141c0ff,0x9141b000-0x9141b7ff at device 18.0 on pci0
ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
pcib1: <ACPI PCI-PCI bridge> at device 19.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <network> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 19.2 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0x91204000-0x91204fff,0x91200000-0x91203fff at device 0.0 on pci2
re0: Using 1 MSI-X message
re0: turning off MSI enable bit.
re0: ASPM disabled
re0: Chip rev. 0x4c000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 00:01:2e:82:20:52
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib3: <ACPI PCI-PCI bridge> at device 20.0 on pci0
pci3: <ACPI PCI bus> on pcib3
re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0x91104000-0x91104fff,0x91100000-0x91103fff at device 0.0 on pci3
re1: Using 1 MSI-X message
re1: turning off MSI enable bit.
re1: ASPM disabled
re1: Chip rev. 0x4c000000
re1: MAC rev. 0x00000000
miibus1: <MII bus> on re1
rgephy1: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus1
rgephy1:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re1: Using defaults for TSO: 65518/35/2048
re1: Ethernet address: 00:01:2e:82:20:53
re1: netmap queues/slots: TX 1/256, RX 1/256
xhci0: <Intel Apollo Lake USB 3.0 controller> mem 0x91400000-0x9140ffff irq 17 at device 21.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
sdhci_pci0: <Intel Apollo Lake eMMC 5.0 Controller> mem 0x9141a000-0x9141afff,0x91419000-0x91419fff irq 39 at device 28.0 on pci0
sdhci_pci0: 1 slot(s) allocated
mmc0: <MMC/SD bus> on sdhci_pci0
sdhci_pci1: <Generic SD HCI> mem 0x91418000-0x91418fff,0x91417000-0x91417fff irq 42 at device 30.0 on pci0
sdhci_pci1: 1 slot(s) allocated
mmc1: <MMC/SD bus> on sdhci_pci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounter "TSC" frequency 1094400190 Hz quality 1000
Timecounters tick every 1.000 msec
ugen0.1: <Intel XHCI root HUB> at usbus0
hdacc0: <Realtek ALC892 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC892 (Left Analog)> at nid 20 and 24 on hdaa0
pcm1: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa0
hdacc1: <Intel Broxton HDA CODEC> at cad 2 on hdac0
hdaa1: <Intel Broxton Audio Function Group> at nid 1 on hdacc1
pcm2: <Intel Broxton (HDMI/DP 8ch)> at nid 3 on hdaa1
uhub0 on usbus0
uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
mmc0: No compatible cards found on bus
mmc1: No compatible cards found on bus
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <KINGSTON SV300S37A120G 60AABBF0> ATA8-ACS SATA 3.x device
ada0: Serial Number 50026B7238038D3E
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 114473MB (234441648 512 byte sectors)
Trying to mount root from ufs:/dev/gpt/rootfs [rw]...
uhub0: 15 ports with 15 removable, self powered
ugen0.2: <vendor 0x8087 product 0x0a2a> at usbus0
ugen0.3: <Generic USB2.0-CRW> at usbus0
umass0 on uhub0
umass0: <Generic USB2.0-CRW, class 0/0, rev 2.00/57.13, addr 2> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0x4000
umass0:2:0: Attached to scbus2
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: <Generic- SD/MMC/MS PRO 1.00> Removable Direct Access SPC-2 SCSI device
da0: Serial Number 20120926571200000
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>
ugen0.4: <Logitech Logitech Illuminated Keyboard> at usbus0
ukbd0 on uhub0
ukbd0: <Logitech Logitech Illuminated Keyboard, class 0/0, rev 2.00/55.03, addr 3> on usbus0
kbd2 at ukbd0
re0: link state changed to UP
re1: link state changed to UP
Intel(R) Wireless WiFi based driver for FreeBSD
iwm0: <Intel(R) Dual Band Wireless AC 3165> mem 0x91300000-0x91301fff at device 0.0 on pci1
iwm0: hw rev 0x210, fw ver 22.361476.0, address 00:e1:8c:3b:6e:bf
ichsmb0: <Intel Broxton SMBus controller> port 0xf040-0xf05f mem 0x91416000-0x914160ff at device 31.1 on pci0
pcib0: no PRT entry for 0.31.INTA
ichsmb0: can't get IRQ
device_attach: ichsmb0 attach returned 6
ugen0.2: <vendor 0x8087 product 0x0a2a> at usbus0 (disconnected)
ugen0.2: <vendor 0x8087 product 0x0a2a> at usbus0
uhid0 on uhub0
uhid0: <Logitech Logitech Illuminated Keyboard, class 0/0, rev 2.00/55.03, addr 3> on usbus0
lo0: link state changed to UP
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
pflog0: permanently promiscuous mode enabled
re0: link state changed to DOWN
vlan0: changing name to 'vlan0.1.9.60'
vlan1: changing name to 'vlan0.1.9.64'
re1: link state changed to DOWN
re0: link state changed to UP
vlan0.1.9.64: link state changed to UP
vlan0.1.9.60: link state changed to UP
re1: link state changed to UP
wg0: changing name to 'wg1'
wg1: link state changed to UP
pid 6733 (python3.11), jid 0, uid 0: exited on signal 11 (no core dump - bad address)


Fatal trap 12: page fault while in kernel mode
cpuid = 1; apic id = 02
fault virtual address = 0xffffee0599a08737
fault code = supervisor read data, page not present
instruction pointer = 0x20:0xffffffff80c84193
stack pointer         = 0x28:0xfffffe00ad6d5a00
frame pointer         = 0x28:0xfffffe00ad6d5ac0
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 60435 (rrdtool)
rdi: 000000000000002f rsi: 00000000f6d31570 rdx: fffff8006ee50804
rcx: fffffe00ad6d5d20  r8: 00000000f6d31502  r9: fffff80178a46c60
rax: fffffe00ad6d5ca0 rbx: fffffe00ad6d5ca0 rbp: fffffe00ad6d5ac0
r10: fffff80002704f30 r11: fffff80178a46c60 r12: fffffe00ad6d5ad4
r13: 0000000000000400 r14: 0000000000000400 r15: fffffe00ad6d5d58
trap number = 12
panic: page fault
cpuid = 1
time = 1735205402
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe00ad6d56f0
vpanic() at vpanic+0x131/frame 0xfffffe00ad6d5820
panic() at panic+0x43/frame 0xfffffe00ad6d5880
trap_fatal() at trap_fatal+0x40b/frame 0xfffffe00ad6d58e0
trap_pfault() at trap_pfault+0x46/frame 0xfffffe00ad6d5930
calltrap() at calltrap+0x8/frame 0xfffffe00ad6d5930
--- trap 0xc, rip = 0xffffffff80c84193, rsp = 0xfffffe00ad6d5a00, rbp = 0xfffffe00ad6d5ac0 ---
cache_fplookup() at cache_fplookup+0x2e3/frame 0xfffffe00ad6d5ac0
namei() at namei+0x112/frame 0xfffffe00ad6d5b20
vn_open_cred() at vn_open_cred+0x53a/frame 0xfffffe00ad6d5c90
openatfp() at openatfp+0x268/frame 0xfffffe00ad6d5de0
sys_open() at sys_open+0x28/frame 0xfffffe00ad6d5e00
amd64_syscall() at amd64_syscall+0x100/frame 0xfffffe00ad6d5f30
fast_syscall_common() at fast_syscall_common+0xf8/frame 0xfffffe00ad6d5f30
--- syscall (5, FreeBSD ELF64, open), rip = 0x8263843da, rsp = 0x820a6d208, rbp = 0x820a6d3b0 ---
KDB: enter: panic
---<<BOOT>>---
Copyright (c) 1992-2023 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.1-RELEASE-p6 stable/24.7-n267981-8375762712f SMP amd64
FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9)
VT(efifb): resolution 1680x1050
CPU: Intel(R) Celeron(R) CPU N3450 @ 1.10GHz (1094.40-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x506c9  Family=0x6  Model=0x5c  Stepping=9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x101<LAHF,Prefetch>
  Structured Extended Features=0x2294e283<FSGSBASE,TSCADJ,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA>
  Structured Extended Features3=0x2c000000<IBPB,STIBP,ARCH_CAP>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  IA32_ARCH_CAPS=0x1<RDCL_NO>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8091561984 (7716 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <INTEL  EDK2    >
WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-119
Launching APs: 2 1 3
random: entropy device external interface
wlan: mac acl policy registered
kbd1 at kbdmux0
WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0.
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
smbios0: <System Management BIOS> at iomem 0x798ef000-0x798ef01e
smbios0: Version: 3.0, BCD Revision: 3.0
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
acpi0: <ALASKA A M I >
acpi0: Power Button (fixed)
unknown: I/O range not supported
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0
Timecounter "HPET" frequency 19200000 Hz quality 950
Event timer "HPET" frequency 19200000 Hz quality 550
Event timer "HPET1" frequency 19200000 Hz quality 440
Event timer "HPET2" frequency 19200000 Hz quality 440
Event timer "HPET3" frequency 19200000 Hz quality 440
Event timer "HPET4" frequency 19200000 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0x90000000-0x90ffffff,0x80000000-0x8fffffff at device 2.0 on pci0
vgapci0: Boot video device
hdac0: <Intel Broxton-P HDA Controller> mem 0x91410000-0x91413fff,0x91000000-0x910fffff irq 25 at device 14.0 on pci0
pci0: <simple comms> at device 15.0 (no driver attached)
ahci0: <Intel Apollo Lake AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0x91414000-0x91415fff,0x9141c000-0x9141c0ff,0x9141b000-0x9141b7ff at device 18.0 on pci0
ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
pcib1: <ACPI PCI-PCI bridge> at device 19.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <network> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 19.2 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0x91204000-0x91204fff,0x91200000-0x91203fff at device 0.0 on pci2
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x4c000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 00:01:2e:82:20:52
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib3: <ACPI PCI-PCI bridge> at device 20.0 on pci0
pci3: <ACPI PCI bus> on pcib3
re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0x91104000-0x91104fff,0x91100000-0x91103fff at device 0.0 on pci3
re1: Using 1 MSI-X message
re1: ASPM disabled
re1: Chip rev. 0x4c000000
re1: MAC rev. 0x00000000
miibus1: <MII bus> on re1
rgephy1: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus1
rgephy1:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re1: Using defaults for TSO: 65518/35/2048
re1: Ethernet address: 00:01:2e:82:20:53
re1: netmap queues/slots: TX 1/256, RX 1/256
xhci0: <Intel Apollo Lake USB 3.0 controller> mem 0x91400000-0x9140ffff irq 17 at device 21.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
sdhci_pci0: <Intel Apollo Lake eMMC 5.0 Controller> mem 0x9141a000-0x9141afff,0x91419000-0x91419fff irq 39 at device 28.0 on pci0
sdhci_pci0: 1 slot(s) allocated
mmc0: <MMC/SD bus> on sdhci_pci0
sdhci_pci1: <Generic SD HCI> mem 0x91418000-0x91418fff,0x91417000-0x91417fff irq 42 at device 30.0 on pci0
sdhci_pci1: 1 slot(s) allocated
mmc1: <MMC/SD bus> on sdhci_pci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounter "TSC" frequency 1094400037 Hz quality 1000
Timecounters tick every 1.000 msec
ugen0.1: <Intel XHCI root HUB> at usbus0
hdacc0: <Realtek ALC892 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC892 (Left Analog)> at nid 20 and 24 on hdaa0
pcm1: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa0
hdacc1: <Intel Broxton HDA CODEC> at cad 2 on hdac0
hdaa1: <Intel Broxton Audio Function Group> at nid 1 on hdacc1
pcm2: <Intel Broxton (HDMI/DP 8ch)> at nid 3 on hdaa1
uhub0 on usbus0
uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
mmc0: No compatible cards found on bus
mmc1: No compatible cards found on bus
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <KINGSTON SV300S37A120G 60AABBF0> ATA8-ACS SATA 3.x device
ada0: Serial Number 50026B7238038D3E
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 114473MB (234441648 512 byte sectors)
Trying to mount root from ufs:/dev/gpt/rootfs [rw]...
WARNING: / was not properly dismounted
uhub0: 15 ports with 15 removable, self powered
ugen0.2: <vendor 0x8087 product 0x0a2a> at usbus0
ugen0.3: <Generic USB2.0-CRW> at usbus0
umass0 on uhub0
umass0: <Generic USB2.0-CRW, class 0/0, rev 2.00/57.13, addr 2> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0x4000
umass0:2:0: Attached to scbus2
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: <Generic- SD/MMC/MS PRO 1.00> Removable Direct Access SPC-2 SCSI device
da0: Serial Number 20120926571200000
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>
ugen0.4: <Logitech Logitech Illuminated Keyboard> at usbus0
ukbd0 on uhub0
ukbd0: <Logitech Logitech Illuminated Keyboard, class 0/0, rev 2.00/55.03, addr 3> on usbus0
kbd2 at ukbd0
re0: link state changed to UP
re1: link state changed to UP
Intel(R) Wireless WiFi based driver for FreeBSD
iwm0: <Intel(R) Dual Band Wireless AC 3165> mem 0x91300000-0x91301fff at device 0.0 on pci1
iwm0: hw rev 0x210, fw ver 22.361476.0, address 00:e1:8c:3b:6e:bf
ichsmb0: <Intel Broxton SMBus controller> port 0xf040-0xf05f mem 0x91416000-0x914160ff at device 31.1 on pci0
pcib0: no PRT entry for 0.31.INTA
ichsmb0: can't get IRQ
device_attach: ichsmb0 attach returned 6
ng_ubt: HCI command 0x0c03 timed out
uhid0 on uhub0
uhid0: <Logitech Logitech Illuminated Keyboard, class 0/0, rev 2.00/55.03, addr 3> on usbus0
lo0: link state changed to UP
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
ng_ubt: HCI command 0x0c03 timed out
pflog0: permanently promiscuous mode enabled
re0: link state changed to DOWN
vlan0: changing name to 'vlan0.1.9.60'
vlan1: changing name to 'vlan0.1.9.64'
re1: link state changed to DOWN
re0: link state changed to UP
vlan0.1.9.64: link state changed to UP
vlan0.1.9.60: link state changed to UP
re1: link state changed to UP
wg0: changing name to 'wg1'
wg1: link state changed to UP


Fatal trap 12: page fault while in kernel mode
cpuid = 1; apic id = 02
fault virtual address = 0x21
fault code = supervisor write data, page not present
instruction pointer = 0x20:0xffffffff80bb06a4
stack pointer         = 0x28:0xfffffe00aec45ac0
frame pointer         = 0x28:0xfffffe00aec45ac0
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 38210 (php)
rdi: fffff80002cbf840 rsi: fffff801bbe14000 rdx: fffff80033c1d130
rcx: 0000000000000001  r8: 0000000000000001  r9: fffffe00aec45a00
rax: 0000000000000021 rbx: 0000000000063000 rbp: fffffe00aec45ac0
r10: 0000000000000001 r11: 0000000838753000 r12: fffff801a3ea7b40
r13: fffff801720b1060 r14: 0000000000000000 r15: fffff80002cbf840
trap number = 12
panic: page fault
cpuid = 1
time = 1735654140
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe00aec457b0
vpanic() at vpanic+0x131/frame 0xfffffe00aec458e0
panic() at panic+0x43/frame 0xfffffe00aec45940
trap_fatal() at trap_fatal+0x40b/frame 0xfffffe00aec459a0
trap_pfault() at trap_pfault+0x46/frame 0xfffffe00aec459f0
calltrap() at calltrap+0x8/frame 0xfffffe00aec459f0
--- trap 0xc, rip = 0xffffffff80bb06a4, rsp = 0xfffffe00aec45ac0, rbp = 0xfffffe00aec45ac0 ---
_rw_runlock_cookie_int() at _rw_runlock_cookie_int+0x34/frame 0xfffffe00aec45ac0
vm_map_insert1() at vm_map_insert1+0x46b/frame 0xfffffe00aec45b50
vm_map_fixed() at vm_map_fixed+0x18e/frame 0xfffffe00aec45bd0
vm_mmap_object() at vm_mmap_object+0x1ca/frame 0xfffffe00aec45c50
vn_mmap() at vn_mmap+0x14e/frame 0xfffffe00aec45ce0
kern_mmap() at kern_mmap+0x58d/frame 0xfffffe00aec45dc0
sys_mmap() at sys_mmap+0x42/frame 0xfffffe00aec45e00
amd64_syscall() at amd64_syscall+0x100/frame 0xfffffe00aec45f30
fast_syscall_common() at fast_syscall_common+0xf8/frame 0xfffffe00aec45f30
--- syscall (477, FreeBSD ELF64, mmap), rip = 0x2d4ff5fff04a, rsp = 0x821381918, rbp = 0x821381a80 ---
KDB: enter: panic


Moin! Moin! Generell ist es schwer, ohne eine Fehlermeldung aus dem Log zum Beispiel, Rückschlüsse einer Fehlkonfiguration zu ziehen.

Für den ersten Anfang schau doch mal https://www.zenarmor.com/docs/network-security-tutorials/how-to-enable-antivirus-protection-in-opnsense

Thank you for taking up the topic again. I have installed the smartmontools via pkg and briefly checked the SSD. The state is defined as PASSED. To understand the whole output. I can not find any error with the SSD.

I installed the packages manually via the package manager. Everything works again. Even Wireguard worked again right away.

Code Select Expand


smartctl -t short -a /dev/nvme0
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p2 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Number:                       Fanxiang S500PRO 512GB
Serial Number:                      FXS500PRO224690021
Firmware Version:                   SN09273
PCI Vendor/Subsystem ID:            0x1e4b
IEEE OUI Identifier:                0x000000
Total NVM Capacity:                 512,110,190,592 [512 GB]
Unallocated NVM Capacity:           0
Controller ID:                      0
NVMe Version:                       1.4
Number of Namespaces:               1
Namespace 1 Size/Capacity:          512,110,190,592 [512 GB]
Namespace 1 Formatted LBA Size:     512
Namespace 1 IEEE EUI-64:            000000 0000000001
Local Time is:                      Mon Aug 28 10:15:54 2023 CEST
Firmware Updates (0x14):            2 Slots, no Reset required
Optional Admin Commands (0x0017):   Security Format Frmw_DL Self_Test
Optional NVM Commands (0x001f):     Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat
Log Page Attributes (0x02):         Cmd_Eff_Lg
Maximum Data Transfer Size:         512 Pages
Warning  Comp. Temp. Threshold:     90 Celsius
Critical Comp. Temp. Threshold:     95 Celsius

Supported Power States
St Op     Max   Active     Idle   RL RT WL WT  Ent_Lat  Ex_Lat
0 +     6.50W       -        -    0  0  0  0        0       0
1 +     5.80W       -        -    1  1  1  1        0       0
2 +     3.60W       -        -    2  2  2  2        0       0
3 -   0.7460W       -        -    3  3  3  3     5000   10000
4 -   0.7260W       -        -    4  4  4  4     8000   45000

Supported LBA Sizes (NSID 0x1)
Id Fmt  Data  Metadt  Rel_Perf
0 +     512       0         0

=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART/Health Information (NVMe Log 0x02)
Critical Warning:                   0x00
Temperature:                        41 Celsius
Available Spare:                    100%
Available Spare Threshold:          1%
Percentage Used:                    1%
Data Units Read:                    104,470 [53.4 GB]
Data Units Written:                 17,771,382 [9.09 TB]
Host Read Commands:                 2,640,907
Host Write Commands:                82,768,711
Controller Busy Time:               381
Power Cycles:                       25
Power On Hours:                     5,265
Unsafe Shutdowns:                   19
Media and Data Integrity Errors:    6
Error Information Log Entries:      116
Warning  Comp. Temperature Time:    0
Critical Comp. Temperature Time:    0
Temperature Sensor 1:               41 Celsius
Temperature Sensor 2:               46 Celsius

Error Information (NVMe Log 0x01, 16 of 64 entries)
No Errors Logged

Self-test Log (NVMe Log 0x06)
Self-test status: No self-test in progress
No Self-tests Logged

Self-test has begun
Use smartctl -X to abort test


Leider war es mir nicht möglich, mein System trotz hilfreicher Tipps sauber zum Laufen bekommen. Der opnsense-bootstrap Befehl soll das System eigentlich wieder neu reinstallieren, aber aus einem unbekannten Grund ging dies schief. Erschwerend kam dazu, dass ich einen Fehler im Filesystem hatte und fsck nicht sauber war.

Da ich ein aktuelles Backup meiner CONF hatte, habe ich das System neu aufgesetzt und das Backup eingespielt. Bis auf paar Pakete lief alles wieder auf anhieb. Ich sehe es sportlich und habe es auch als Training gesehen
:)

Dickes Danke an die Jungs aus dem englischen Form, sie haben mir viele Tipps gegeben.

Brief feedback on my problem. The opnsense-bootstrap command made the firewall unusable and I had to reinstall the system completely. The old installation gave error messages that the filesystem is corrupt.

I see it sportily and could immediately test my backup. Unfortunately, the packages have to be reinstalled. Is there a way to check the package dependency?

Thanks that helped me!

Why are we forcing (-f) insecure (-i) major (-u) updates on users? Let's try to stay away from opnsense-update -u here... -r doesn't even work without a release number ;)

If the package database is damaged the only clean solution is to run a full bootstrap:

# opnsense-bootstrap

It will reinstall everything (avoiding a major upgrade wherever it may have taken the user) and keep all settings.


Cheers,
Franco

unfortunately does not work

Code Select Expand


root@opnsense:/ # opnsense-update -fiur 23.7.2
Fetching packages-23.7.2-amd64.tar: ..[fetch: https://pkg.opnsense.org/FreeBSD:13:amd64/23.7/sets/packages-23.7.2-amd64.tar: Not Found] failed, no update found

the file does not exist
https://pkg.opnsense.org/FreeBSD:13:amd64/23.7/sets/

can i run the bootstrap via ssh or do i need vga

unfortunately without success

Code Select Expand


root@opnsense:/ # opnsense-update -fur 23.7.2
Fetching packages-23.7.2-amd64.tar: ..[fetch: https://pkg.opnsense.org/FreeBSD:13:amd64/23.7/sets/packages-23.7.2-amd64.tar.sig: Not Found] failed, no signature found

the same commands with 23.7.1 worked and reboot

more ouput does not come

Code Select Expand


Fetching change log information, please wait... done

This will automatically fetch all available updates and apply them.

Proceed with this action? [y/N]: y

Nothing to do.
Starting web GUI...done.
Generating RRD graphs...done.

*** opnsense.myhome.lan: OPNsense 23.7.1_3 ***

LAN (re0)       -> v4: 10.0.16.254/24
OPT1 (ue0)      -> v4: 192.168.2.254/24
WAN (igc0)      -> v4/DHCP4: 9x.xx.xx.xx/22
WG1 (wg1)       -> v4: 10.11.0.1/24

HTTPS: SHA256 18 55 ................................
SSH:   SHA256 Bqk................................ (ECDSA)
SSH:   SHA256 aUkUp............................ (ED25519)
SSH:   SHA256 qoD3by............................(RSA)

  0) Logout                              7) Ping host
  1) Assign interfaces                   8) Shell
  2) Set interface IP address            9) pfTop
  3) Reset the root password            10) Firewall log
  4) Reset to factory defaults          11) Reload all services
  5) Power off system                   12) Update from console
  6) Reboot system                      13) Restore a backup

Enter an option:


Code Select Expand


Proceed with this action? [y/N]: h

>>> Check installed kernel version
Version 23.7.1 is correct.
>>> Check for missing or altered kernel files
No problems detected.
>>> Check installed base version
Version 23.7.1 is correct.
>>> Check for missing or altered base files
No problems detected.
>>> Check installed repositories
OPNsense
>>> Check installed plugins
No plugins found.
>>> Check locked packages
No locks found.
>>> Check for missing package dependencies
>>> Check for missing or altered package files
>>> Check for core packages consistency
Core package "opnsense" not known to package database.

Press any key to return to menu.


Thx for help  :)

Code Select Expand


root@opnsense:/ # df -h
Filesystem                  Size    Used   Avail Capacity  Mounted on
/dev/gpt/rootfs             454G    2.6G    415G     1%    /
devfs                       1.0K    1.0K      0B   100%    /dev
/dev/gpt/efifs              256M    1.7M    254M     1%    /boot/efi
devfs                       1.0K    1.0K      0B   100%    /var/dhcpd/dev
devfs                       1.0K    1.0K      0B   100%    /var/unbound/dev
/usr/local/lib/python3.9    454G    2.6G    415G     1%    /var/unbound/usr/local/lib/python3.9


Code Select Expand


root@opnsense:/ # opnsense-update -u
No known packages set to fetch was specified.
root@opnsense:/ #


this is option 12 output

Code Select Expand


Enter an option: 12

Fetching change log information, please wait... done

This will automatically fetch all available updates and apply them.

Proceed with this action? [y/N]: y

Nothing to do.
Starting web GUI...done.
Generating RRD graphs...done.
*
*
*


Hello Community,
as already described in the topic I can not update to 23.7.2. Short description what happened.
I have pushed the update of the repo via the GUi. There is always a window with the new features. The message and update I canceled to pull a backup of the config before. This also worked. A short time later the machine was no longer accessible. After a reboot, I can no longer perform updates. It comes the error message "The release type "opnsense" is not available on this repository."

Code Select Expand


***GOT REQUEST TO CHECK FOR UPDATES***
Currently running OPNsense 23.7.1_3 at Sat Aug 26 12:03:00 CEST 2023
Fetching changelog information, please wait... done
self: No packages available to install matching 'opnsense'
***DONE***


But according to ChangeLog 23.7.2 should be installed. In the shell I can't do anything via pkg update or opnsense-update -f either.

Dear community, I need some support or help.
Thanks!

It is a phy. machine. Currently it is running, but on state 23.7.1

Addendum: Apparently my pkg database is shot. I can't even reinstall nano. A pkg update and upgrade is executed without a message. Also I can't display the installed packages.