Messages

The Captive Portal won't let me upload new templates I created, why?
i use this templates before and now it not let me to upload and use it

There was an update to OPNSENSE so I did an update and it got stuck in the middle of the process so I did a RR and now the router has reset all its settings to default. I changed the IP address and tried to restore the settings from the file I saved but I get the following error: The following input errors were detected:

The configuration could not be restored. What can I do now?

hi all
i can't access to my admin page https://192.168.1.1/
Suddenly the web page stop to respond

what can i do?

hi all :)
my Captive Portal not let me login
also if i set the Authenticate using to nothing selected
it always respond: login failed
what can i do?

i change  the temple to none because login and opnsense old logo no show on the page
can you give me example of HTML code for the new version ?

captive portal slow unable to connect to authorization server

i did and now captive portal not work

hi all
i set the web control Profile to high control so all porno website need to be block
but if i google porno I find open sites.

plz fix this ty..

hi all :)

i update and opnsense to 25 version

my opnsense have captive portal config on lan2
and i use lan1

suddenly lan1 network lock by the captive portal and i get message that i need to connect to the captive portal
i open the captive portal login page and the login button is missing. It doesn't appear.

and now i can't login to admin page https://10.90.60.253/ Not responding

so plz help

hi all.....;~}
have a good day

i like to have ssl in my website now i run in port 80

if it possible to give my website a SSL Certificate use OPNSense?
if yes so please send me a guide
or tell me what to do
Thank you

hi all :)

when I enter the lobby (dashboard) the page after the new update is empty and i can not see nothing
I'm trying to go to firewall (or else) page but is not work it not open the menu
only if i click on license page then all menu link back to work

can you fix this?

yes ty is good now
cpu not on 100% full load all the time like he was
i hope it doesn't happen again

now i get 500MB download speed and 250MB upload
every speed test the cup jump to 100% full load until the end of the test, which is a few seconds

 :) Thank you very much for your answers now the ssh works


ssh@mp-nt-firewall:~ $ ps awwux | grep python (command output:)
ssh  67861  0.0  0.0 12724 2036  0  R+   12:29   0:00.00 grep python

top command:
last pid: 77202;  load averages:  0.56,  0.61,  0.65    up 3+10:28:45  12:33:47
3 processes:   1 running, 2 sleeping
CPU:  0.0% user,  0.0% nice,  0.0% system,  0.5% interrupt, 99.5% idle
Mem: 1500M Active, 736M Inact, 139M Laundry, 1290M Wired, 395M Buf, 287M Free
Swap: 8192M Total, 2107M Used, 6085M Free, 25% Inuse

  PID USERNAME    THR PRI NICE   SIZE    RES STATE    C   TIME    WCPU COMMAND
97705 ssh           1  20    0    14M  3124K CPU1     1   0:00   0.06% top
77283 ssh           1  20    0    18M  7020K select   3   0:00   0.05% sshd
77580 ssh           1  20    0    13M  2916K wait     1   0:00   0.00% sh

passeri
i have 8GB ram in my i3 pc for Intrusion Detection (Suricata) so
what is meant by say
what base system?
and what makes it a surprise? - (i don't know)

i need to get 1GB Download and 250MB upload but if the cpu on 100% load i get only 200mb max sometimes 50mb like you see in the pictrure i send so

Patrick M. Hausen
i have try to go System -> Settings -> Administration
and I marked  Enable Secure Shell and Permit password login for  Authentication Method (and unmarked  it for test) so i can use putty but  putty  give me Access denied for root user and closes the putty window softwarefor exit efter i log via my user name Moty_p so i don't know waht to do also i can't access the opnsense web url like the pictrues i upload for you mp-nt-firewall.mp-lab.co.il only via ip address

hi all  ;)

i like you to give me recommendations for pc hardware to buy from ebay / else
links be welcome

for:
1) PCIe (X2) card for wifi support AX / AXe
2) PCIe (X16) card for fiber optic support 1GB 2.5GB 5GB and 10GB
3) SFP / SFP+ Plug for ISP's Singal cabel and fiber optic card

Thank you very much for your help

Patrick M. Hausen
i don't know how to copy and paste the output of that command as text sorry


passeri
You can blame the virtual environment but I'm not convinced of that
all the point is that It's very strange it sometimes happens suddenly unexpectedly like a cyber attack
and you need to know what it is
i use:

Service    Description       
acme   ACME client      
captiveportal   Captive Portal      
cicap   C-ICAP server      
clamd   ClamAV Daemon      
configd   System Configuration Daemon      
cron   Cron      
ddclient   ddclient      
dhcpd   DHCPv4 Server      
flowd_aggregate   Insight Aggregator      
iperf   iperf Performance Test      
ipfw   Shaper      
login   Users and Groups      
miniupnpd   Universal Plug and Play      
nginx   Reverse Proxy and Web Server      
ntpd   Network Time Daemon      
openvpn   OpenVPN server: OpenVPN2023      
pf   Packet Filter      
routing   System routing      
samplicate   NetFlow Distributor      
suricata   Intrusion Detection      
sysctl   System tunables      
syslog-ng   Syslog-ng Daemon      
unbound   Unbound DNS      
vnstatd   vnStat Daemon      
webgui   Web GUI      

i like to try migret my opnsense from vm to physical pc (I3) and see if this happening again but it will take me a while (if at all)