Messages

I resolved by installing vmware and works from there :/ it seems i had problems with oracle...

thanks so much Vilhonator...i will try...
Dear Patrick, actually Im following a laboratory and im not sure why to use opn sense I need kali linux...

If i can , i will post the link with the video maybe it can help ?
But i don't want to bother ! i will try your suggestions..

i dont know if it can help but once i opened opnsense log in on kali , the author of this lab show how to modify some stuff :

from the section interfaces-->settings--> HARDWARE CRC : I disabled hardware checksum offload; HARDWARE TSO: disabled hardware tcp segmentation offload; HARDWARE LRO: disabled hardware large receive offload.
then in the services that opnsense shows I enable:  the intrusion and detection systm, the ips mode , the promiscuous mode, the syslog alerts.
That's all. Then the pc shut down because of the low battery i didnt realized ... and now im not able to load the internet pages on firefox ( from Kali linux..)
:o :o :o :o :o :o :o :o :o :o :o :o :o :o :o :o

"It seems the machines are all connected to either modem or router, since all are receiving local IPs, so issue is most likely with routing or having "Block private networks" enabled on WAN or something other, very tiny detail and easy to miss"
Dear VIlhonator YES ! ! ! u are in... u just understood the problem... all the vm are connected I have a router.
Kali and Opnsense are connected with the same Subnetmask but different Ip obv...
maybe i have to insert manually a gw?

Im not able to ping google.com But im able to ping the IP of OPNsense and the Ip of Kali.


when i insert the command routes that's the result:

Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
192.168.1.0     0.0.0.0         255.255.255.0   U     0      0        0 eth0

I guess maybe i have to insert a gw ? but i tried to and nothing changed.

THANKS FOR YOUR PRECIOUS HELP ! !

dear patrick im sorry. U right but im new in that process I've always worked in other...
so i will try to explain something..


- Kali VM and the OPNsense VM connected are connected via internal net ( intnet)

- I configured lan in Opnsense

- I do not know if the DHCP server active is active on OPNsense and I do not know how to see.

-  Yes Kali Linux receive the correct default gateway

- Im able to ping 192.168.1.60 which is IP opnsense , Im able to ping 192.168.1.65 IP kali but im not able to ping 8.8.8.8 or / 4.4. " network unreachble"

The lab is online and registered im not in contact with the author.. but i will try to do it..

dear Patrick
Im following a Laboratory about OPNsense on vm and im following step by steps what to do...
Now the pages on firefox in kali linux cannot load...
if i ping my ip address 192.168.1.60 everything goes well but if i ping 8.8.8.8 nothing works..
I need to use firefox on kali linux but Im stuck in this problem...i cannot load pages...

and where i can reach the dns settings ?  :-X :-X :-X i still have problems...

Hello everyone,
Thanks to all for the help for the last argmnt. I have an other problem.
I managed to enter on opnsense on firefox in kali linux, and I logged in; then I started to prepare it to run well  modifying the options and so on...
then My pc shut down for low battery ( I know... wtf ) and Once I re start the pc, and now begin the problem: Kali linux Is connected to internet ( I ping my IP and everything goes well , if i ping 8.8.8.8 or 8.8.4.4 it doesnt run....AAAAAND firefox shows that problem:

Hmm. We're having trouble finding that site.

We can't connect to the server at www.google.com.

If that address is correct, here are three other things you can try:

    Try again later.
    Check your network connection.
    If you are connected but behind a firewall, check that Firefox has permission to access the Web.

please can anyone help me ? Sorry im new over here and on opnsense Im following the LS111 laboratory on youtube ( pretty good but I stuck in this problem :/ )
Thanks to everyone !

thanks guys , it seems I resolved.
But i have an other problem, i will open an other discussion.
Thanks to every one.

I guess I will have to modify manually the kali net to in order to have the same for the subnet opnsense...
what do u think about it ? but im not able to.!

dear coockiemonster,
I set a neetwork bridge for linux and two for opnsense ( nat and internal )....
what do u think about it..?

Hello everyone ! Im new here.. and new on OPNsense.
I type 192.168.1.66 into my browser on Kali and it just says "This site cannot be reached" I tried lot of stuff but nothing works...
I have tried with different browsers and still the same issue. I installed kali on VM virtual Box and OPNSENSE too.
Is there anyone who can help me please ?