Messages

I got wan ipv6 address by dhcpv6 from IPS.

I set the wan with dhcpv6 and lan tracker interface(wan) by referring to https://docs.opnsense.org/manual/how-tos/IPv6_ZenUK.html .The only difference is that I didn't check 'Use IPv4 connectivity' because I didn't use PPP connectivity link.
The iuuse is I can got a wan ipv6 address but the clients bebind lan cannot got any IPv6 address...
I also tried set lan with static  ipv6 address, then I cann't Ping [2001:4860:4860::8888] from lan(wan works fine).

Be careful! I didn't mean that adding manually not work. I just want automatic generation should be supported like IPv4. Although IPv6 is enough, it does not mean that NATv6 technology is obsolete.

Yes，But I just want to use IPv6 NAT like in IPv4.Because IPS cannot provide dynamic IPv6 address correctly by dhcpv6 or SLAAC.

When I set IPv4 and IPv6 addresses at the same time on the LAN and WAN interfaces, the system can automatically generate IPv4 outbound rules, but cannot generate IPv6 outbound rules. I need to add these Outbound rules for IPv6 manually.

Maybe we have the same problem.the dhcpv6 service didn't start normally.https://forum.opnsense.org/index.php?topic=31324.0

Both Lan(fe80::1) and Wan interface use static ipv6.
Here is the log:
/status_services.php: Warning! dhcpd_dhcp6_configure() found no suitable IPv6 address on lan