Messages

1

General Discussion / Re: OPNsense behind Fritz!Box reboots

« on: October 14, 2022, 09:58:31 pm »

Just give an update:
The issue is caused by hardware incompatibility between the ThinClient (Fujitsu Futro S920) I was using as base for the OPNSense and the Intel PRO/1000PT Quad Port.
The Futro S920 comes in multiple versions, mine has the AMD GX-222GC SoC which is incompatible with the Intel NIC.
The incompatibility is based on the AMD's APU and the Active State Power Mgmt (ASPM) on the NIC.
See https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=240944
Disabling ASPM (hw.pci.enable_aspm = 0) did not solve the problem.

I decided to switch the ThinClient for an earlier version with an AMD GX-415GA SoC.
The issue was never seen with this ThinClient/NIC combo and OPNsense is running stable ever since 

2

General Discussion / Re: OPNsense behind Fritz!Box reboots

« on: October 06, 2022, 01:39:23 pm »

After plugging a monitor into the OPNsense I discovered that it simply reboots for no reason.
That's why I heard the boot beep in the first place.
I still see the log entry, but it seems now that this is just a reaction to the reboot.

Maybe it's a hardware issue, but I have no replacement parts right now.

Thanks for the help so far, I have edited the title.

3

General Discussion / Re: OPNsense behind Fritz!Box resets interfaces

« on: October 06, 2022, 12:31:16 pm »

I switched to the manufacturer's drivers for the Realtek card yesterday using the os-realtek-re plugin.

I have an Intel PRO/1000PT Quad Port NIC installed as well (em0...3), so I switched the WAN interface from re0 to em1.

Sadly the error is exactly the same on the em1 interface.

The config was WAN re0, LAN em0 which I now changed to WAN em1 and LAN em1.

4

General Discussion / OPNsense behind Fritz!Box reboots

« on: October 06, 2022, 11:42:15 am »

***EDIT*** Title

The problem occurs with the following setup using OPNsense 22.7.5:

Internet
     |
     |
Fritz!Box [AVM Internet Router] (IP 192.168.0.1/24, Exposed Hosts set to 192.168.0.2/24)
     |
     |
OPNsense (WAN: 192.168.0.2/24, Upstream Gateway 192.168.0.1, LAN; 192.168.1.1/24)
     |
     |
Managed Switch (192.168.1.2/24)
     |
     |
Client (192.168.1.3/24)

Also I have disabled "Block private networks" for the WAN interface since I use the Fritz!Box to connect to the internet.

It working as intended so far, but I get regular occurrences of the following which forces a connection loss and the OPNsense to perform some kind of "reset" since I hear the startup beep (da da di da da).

Code: [Select]

2022-10-06T11:07:16 Notice syslog-ng Configuration reload finished;
2022-10-06T11:07:16 Notice syslog-ng Configuration reload request received, reloading configuration;
2022-10-06T11:07:14 Error opnsense /usr/local/etc/rc.routing_configure: The WAN_GW monitor address is empty, skipping.
2022-10-06T11:07:14 Notice opnsense plugins_configure monitor (execute task : dpinger_configure_do(1,))
2022-10-06T11:07:14 Notice opnsense plugins_configure monitor (1,)
2022-10-06T11:07:14 Error opnsense /usr/local/etc/rc.routing_configure: ROUTING: keeping current default gateway '192.168.0.1'
2022-10-06T11:07:14 Error opnsense /usr/local/etc/rc.routing_configure: ROUTING: setting IPv4 default route to 192.168.0.1
2022-10-06T11:07:14 Error opnsense /usr/local/etc/rc.routing_configure: ROUTING: IPv4 default gateway set to wan
2022-10-06T11:07:14 Error opnsense /usr/local/etc/rc.routing_configure: ROUTING: entering configure using defaults
2022-10-06T11:07:12 Notice php plugins_configure bootup (execute task : unbound_configure_do(1))
2022-10-06T11:07:12 Notice php plugins_configure bootup (execute task : opendns_configure_do(1))
2022-10-06T11:07:12 Notice php plugins_configure bootup (execute task : ntpd_configure_do(1))
2022-10-06T11:07:12 Notice php plugins_configure bootup (1)
2022-10-06T11:07:12 Error php /usr/local/etc/rc.bootup: Resyncing OpenVPN instances.
2022-10-06T11:07:12 Notice php plugins_configure vpn (execute task : openvpn_configure_do(1))
2022-10-06T11:07:10 Notice php plugins_configure vpn (execute task : ipsec_configure_do(1))
2022-10-06T11:07:10 Notice php plugins_configure vpn (1)
2022-10-06T11:07:10 Error php /usr/local/etc/rc.bootup: The WAN_GW monitor address is empty, skipping.
2022-10-06T11:07:10 Notice php plugins_configure monitor (execute task : dpinger_configure_do(1,,1))
2022-10-06T11:07:10 Notice php plugins_configure monitor (1,,1)
2022-10-06T11:07:09 Notice php plugins_configure dns (execute task : unbound_configure_do(1))
2022-10-06T11:07:09 Notice php plugins_configure dns (execute task : dnsmasq_configure_do(1))
2022-10-06T11:07:09 Notice php plugins_configure dns (1)
2022-10-06T11:07:09 Notice php plugins_configure dhcrelay (execute task : dhcpd_dhcrelay_configure(1))
2022-10-06T11:07:09 Notice php plugins_configure dhcrelay (1)
2022-10-06T11:07:09 Notice php plugins_configure dhcp (execute task : dhcpd_dhcp_configure(1))
2022-10-06T11:07:09 Notice php plugins_configure dhcp (1)
2022-10-06T11:07:09 Error php /usr/local/etc/rc.bootup: ROUTING: creating /tmp/re0_defaultgw using '192.168.0.1'
2022-10-06T11:07:09 Error php /usr/local/etc/rc.bootup: ROUTING: setting IPv4 default route to 192.168.0.1
2022-10-06T11:07:09 Error php /usr/local/etc/rc.bootup: ROUTING: IPv4 default gateway set to wan
2022-10-06T11:07:09 Error php /usr/local/etc/rc.bootup: ROUTING: entering configure using defaults
2022-10-06T11:07:09 Notice php plugins_configure early (execute task : webgui_configure_do(1))
2022-10-06T11:07:09 Notice php plugins_configure early (execute task : unbound_cache_flush(1))
2022-10-06T11:07:08 Notice php plugins_configure early (execute task : openssh_configure_do(1))
2022-10-06T11:07:08 Notice php plugins_configure early (1)
2022-10-06T11:07:06 Notice syslog-ng syslog-ng starting up; version='3.38.1'
The Fritz!Box router does not support bridge mode and I cannot replace it with a DSL modem right now.
Researching indicates that the above setup should basically be working, which is does aside from the mentioned instability.

Since I can't make any heads and tails of it, please give me a hint if you can.
Any help would be appreciated!

Thanks.