Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - Fmslick

#1
just stopping to say it looks like in your last screen shot you are missing "WAN address" in your settings. You may want to try and use Aliases for the ports, it makes life ez!

As-well you may want to set your OPNsense box to another port then 80 or 443 so you can use them ports with nginx. you can find it System > settings > Administration: TCP port
#2
22.7 Legacy Series / Re: VlanXX shows up as vlan01 ?
August 22, 2022, 09:46:28 PM
Quote from: crissi on August 21, 2022, 03:29:07 PM
Im also a bit confused here. All my VLANs previously created under Interfaces – Other Types – VLAN are shown under Devices like:


lagg0_VLAN10
lagg0_VLAN15
lagg0_VLAN18
etc.


New created VLAN with 22.7.2 is shown under Device just as vlan01

I re-setup all my Vlan's so they are using the new settings or ways, my switch's are set to the tag (88) I want and not to vlan5 an it seem to be working with out issue.
------
Quote from: Demusman on August 21, 2022, 02:08:04 AM
Quote from: Fmslick on August 21, 2022, 01:27:31 AM
:o Alright, so it will show as vlan0 with the tag of  88 (vlan0:88) ?

No , that's not the vlan tag, it's the first vlan you created, followed by the second (vlan02) which could be tagged with vlan2000.
Yes, it's very weird. But that's opnsense for you.
My switch's are set to the tag (88) I want to use/ not vlan5 an it seem to be working with out issue.  ???
Thanks.
#3
22.7 Legacy Series / Re: VlanXX shows up as vlan01 ?
August 21, 2022, 01:27:31 AM
 :o Alright, so it will show as vlan0 with the tag of  88 (vlan0:88) ?
#4
22.7 Legacy Series / VlanXX shows up as vlan01 ?
August 19, 2022, 11:07:01 PM
Hello all (longtime listener first-time caller),

I am using:
Type: opnsense   
Version: 22.7_4   
Architecture: amd64   
Flavour: OpenSSL      
Mirror: https://pkg.opnsense.org/FreeBSD:13:amd64/22.7   
Repositories: OPNsense   
Updated on: Thu Aug 18 23:12:42 CDT 2022   
:o
When I go to make a new Vlan (vlan88) it will show up as vlan01 or next one will be vlan02 if I try like vlan89 or any number I try it just goes to the next number (vlan02). This didn't start until the other day after I did a update. Is there way to fix this or would need to backup my .config and just reinstall?

Let me know what info you need if we are going to take this down a rabbit hole!  8)


Thanks