Messages

1

22.7 Legacy Series / Re: Routing problem

« on: July 31, 2022, 08:24:27 pm »

Hi,
I delete my old rule and created  a new rule

Connect to WAN

Action : pass
Interface: IPCAM
Direction IN
TCP/IP veriosn : IPV4
Protocol: any
Source: any
Destination: any
Description: Connect to WAN
Gateway:default

regards

Juergen

Now it's working. Maybe there was an typo/error in the previous config.

2

22.7 Legacy Series / Routing problem

« on: July 31, 2022, 02:38:43 pm »

Hi,
I have a problem understanding the internal routing.
Routing from 192.168.168.0 Net to WAN or 192.168.0.0 network works. (including ping from IPCAM interface 192.168.0.1).
Routing from 192.168.0.0 to WAN or 192.168.168.0 network does not work.
Ping from e.g. 192.168.0.10 -> interface 192.168.0.1 , WAN , 192.168.168.0 network does not work.
Laptop directly at the interface IPCAM - no ping possible.
See also attached file with the network overview.

What do I have to configure so that the IPCAM Net reaches the WAN and 192.168.168.0 network ?

Greetings

Jürgen

3

22.1 Legacy Series / [SOLVED] Routing between interfaces

« on: July 28, 2022, 01:58:52 pm »

Hi,
thanks for the resolution. Now it works.

regards

Jürgen

4

22.1 Legacy Series / Re: Routing between interfaces

« on: July 28, 2022, 11:44:15 am »

Hi,
the internal routing works, but I can't access the Internet.

my Configuration

Fritzbox: IP 192.168.1.1/24
OPNSense:
WAN Interface 192.168.1.2/24
LAN Interface 192.168.168.112/24  dhcp for clients ON
OPT1 Interface(IPCam) 192.168.0.1/24  dhcp for clients ON

Internal routing between LAN<-> OPT1 OK

Outgoing LAN -> WAN -> FB doesn't work

Settings:
Disable outbound NAT rule generation - (outbound NAT is disabled)

FIREWALL: RULES: WAN
Action Direction      Protocol   Source   Port   Destination   Port   Gateway   Schedule   Description       
Pass      in          IPv4       *      *      *         *      *      *         *   

SYSTEM: GATEWAYS: SINGLE
    Name   Interface   Protocol   Priority   Gateway   Monitor IP   RTT   RTTd   Loss   Status   Description   
      WAN_Gateway (active)   WAN   IPv4   20 (upstream)   192.168.1.1      ~   ~   ~   Online   Interface WAN_Gateway

5

22.1 Legacy Series / Re: Routing between interfaces

« on: July 27, 2022, 09:16:23 pm »

Hi,
as a OPNSense newbie,
can you post an example ?

my IF
LAN: 192.168.168.0
IPCam: 192.168.0.0

Now i want to access the IPCam Net from the LAN Net


regards,
Jürgen

6

22.1 Legacy Series / SOLVED: Can't install plugins

« on: July 27, 2022, 09:05:04 pm »

After changing the mirror and several check updates, its now on the current version:

Type   opnsense   
Version   22.1.10   
Architecture   amd64   
Flavour   OpenSSL   
Commit   560c0cd90   
Mirror   http://mirror.fra10.de.leaseweb.net/opnsense/FreeBSD:13:amd64/22.1   
Repositories   OPNsense   
Updated on   Wed Jul 27 18:13:15 CEST 2022   
Checked on   Wed Jul 27 21:02:17 CEST 2022

and the installation from additional plugins worked.

regards,

Jürgen

7

22.1 Legacy Series / Can't install plugins

« on: July 27, 2022, 06:08:33 pm »

Hi,
I made a fresh install from OPNsense:

Type   opnsense   
Version   22.1.2_2   
Architecture   amd64   
Flavour   OpenSSL   
Commit   c53e90d29   
Mirror   https://pkg.opnsense.org/FreeBSD:13:amd64/22.1   
Repositories   OPNsense   
Updated on   Mon Mar 14 10:05:57 CET 2022   
Checked on   Wed Jul 27 18:03:13 CEST 2022

but if I want to install an additional plugin:os-api-backup   1.0_1 , i've got an error message:

***GOT REQUEST TO INSTALL***
Currently running OPNsense 22.1.2_2 (amd64/OpenSSL) at Wed Jul 27 18:04:59 CEST 2022
Installation out of date. The update to opnsense-22.1.10 is required.
***DONE***

any ideas how to solve this ?
I run check for updates several times..


regards,
Juergen