Messages

1

Virtual private networks / Re: Wireguard stop the endless suffering

« on: April 03, 2022, 10:22:14 pm »

Thanks for your comments.. Eversince it was clear, that I messed up with some config and I didn't want to blame the documentation, but thought I found a workaround.

The mistake was not the floating/WAN. It was indeed a conflicting NAT Portforwarding Rule. I configured as described in the documentation, fixed the conflicting port forwarding rules and now everything works.

Nevertheless I hope that - since I have searched and searched it might point others to a working VPN setup. RTFM. 

I think we can close.

2

Virtual private networks / Re: Wireguard stop the endless suffering

« on: April 02, 2022, 11:50:22 pm »

So for anyone interested: I works now.

What I did:
I implemented a Rule under Floating and deleted the one on the WAN Interface.

What I still wonder: I really followed the manual, but what worked was this: https://www.youtube.com/watch?v=gNyIACWc60w

Anyway: Thank you all for taking time!

3

Virtual private networks / Re: Wireguard stop the endless suffering

« on: March 29, 2022, 09:02:16 pm »

Still I am stuck. Anyone any ideas, where to look? Is it usual, that the defined tunnelport ist not visible through a port checker? Thanks for you help!

4

Virtual private networks / Re: Wireguard stop the endless suffering

« on: March 24, 2022, 08:44:53 pm »

Thanks for the hint. I applied right after. Still stuck.

5

Virtual private networks / Re: Wireguard stop the endless suffering

« on: March 23, 2022, 09:48:23 pm »

The thing is really I read all of it too often. Sucks somehow, since it appears to be reallly easy. What the hell.

Attached the peers screenshot. (G20)

6

Virtual private networks / Re: Wireguard stop the endless suffering

« on: March 23, 2022, 09:35:56 pm »

 

Ok, maybe I followed to often then. I corrected that. Still no Handshake.

7

Virtual private networks / Re: Wireguard stop the endless suffering

« on: March 23, 2022, 09:29:49 pm »

WIRE Rule.

8

Virtual private networks / Re: Wireguard stop the endless suffering

« on: March 23, 2022, 09:28:41 pm »

Thanks for reply. Yes I followed it point by point.

I forgot to post the Rule on "WIRE" (wg0). See attached.

9

Virtual private networks / Wireguard stop the endless suffering

« on: March 22, 2022, 10:44:47 pm »

Hi all.

I am desperately trying to set up Wireguard. I read all the documentations, seen all the YT, did like 4 setups. Still I fail to set it up and I refuse to accept it. 

What I did to troubleshoot:
Public keys are correct.
Peers are enabeld on local.

Allowed IPs on client is 0.0.0.0/0
Interface is configured on wg01 as WIRE.
Port is set to 5552 and called as VPN_PORT.
NAT outbound as on Screenshoot 1.
Firewall rules as on Screenshot 2.
Peer config on Screenshot 3.
Local config on screenshot 4.
I configured further unbound DNS: DNS over TLS
AL on unbound shows my WG network IP 10.0.0.1/24
Please help. I want to make it work.
Btw.: Be nice I am new to opnsense and firewall at all and I am not an IT. Thanks. ;-)