Messages

Hello,

I've been searching both the forum and Google and I cannot find an answer, hence me posting here.

How can I redirect root domain to www? Meaning example.com pointing to www.example.com

Enriching else works as it should but for the life of me I cannot make this simple redirection working!!

Any clue anyone?

Thanks, that did the trick!

How can Zenarmor install packages if it had been installed? I'm puzzled

I no longer have Zenarmor...it had been decommissioned nearly a year ago.

How to fix that?

Anyone else dealing with this?

Code Select Expand

[29-Jan-2025 15:51:23 UTC] PHP Warning:  PHP Startup: Unable to load dynamic library 'mongodb.so' (tried: /usr/local/lib/php/20230831/mongodb.so (Cannot open "/usr/local/lib/php/20230831/mongodb.so"), /usr/local/lib/php/20230831/mongodb.so.so (Cannot open "/usr/local/lib/php/20230831/mongodb.so.so")) in Unknown on line 0


Hello,

I've been searching both the forum and Google and I cannot find an answer, hence me posting here.

How can I redirect root domain to www? Meaning example.com pointing to www.example.com

Enriching else works as it should but for the life of me I cannot make this simple redirection working!!

SOLVED: It was Cloudflare DNS record that despite being logged as updated, in fact did not update the public IP for some reason.

VERY ODD

For the life of me I cannot get around this...

OUT OF THE BLUE, HAproxy simply stopped working and all my services are unaccessible now.

I haven't changed my configuration for the last 2 years at least and just like that, this morning, it stopped redirecting traffic.

What makes it even more bizzarre is that the only URL that accepts is the one that takes to OPNsense itself.

After having checked the entire configuration from ZERO, I'm at a dead end. Any ideas?

Code Select Expand


feld@gw:~ $ netstat -I ax0
Name    Mtu Network        Address                             Ipkts                 Ierrs                 Idrop       Opkts                 Oerrs                  Coll
ax0    1500 <Link#5>       f4:90:ea:00:62:2d                  382472  18446744073709551610                     0  1703087022                     0                     0
ax0       - fe80::%ax0/64  fe80::f690:eaff:fe00:622d%ax0           0                     -                     -           0                     -                     -



I used to have the same (DEC3840) trying bring down and back the face via shell.
That not only cleared out all errors (I now have 0 errors across the board), but also gave me full 9.4G D/U

this is impossible :)

There must be something worth investigating in...
I look forward to hearing from the likes of @franco

Maybe @franco can advise?

I've noticed a bizarre behavior (DEC3840 here)...

All HW offload is ON but VLAN.

By bringing down and then back up ax0 via ifconfig, I achieve clean 9.4G UP/DOWN

If I reboot, I need to run that command through shell again otherwise I'm capped to 4.5G UP/DOWN

I've now uninstalled Zenarmor for good and going to cancel my subscription at the end of its term (wish I had a refund TBH!!)

Now no more errors on IFs (either physical or VLANs) and performances are gone back up to more than decent.

HOWEVER, what puzzles me is that Speedtest returns just 5G DL/UL when tested at FW level via CLI and 1G clients are capped at 740M DL while UL is fine at 940M.

I may open a new topic somewhere else...but, what do you think might be the cause of this?

I'm running on a Deciso DEC3840 with 64G ECC RAM

OK, so...

1) for troubleshooting purposes, I've now uninstalled Zenarmor...very little errors on VLANs, but still there

2) I've done done that and did not help unfortunately

3) I've moved that IP from physical IF to a dedicated VLAN

I've also factory reset my Tunables and reconfigured them...still no luck

What would you suggest I shall do for better troubleshoot?

Thanks for taking the time to look into this...

Going in order:

1) Yes, Send Queue Drops = SUM(VLANs Output Errors)
2) When I turn RSS on, the actual errors number goes through the roof
3) Yes, the physical interface has its own IP where switches and APs are living. Is that a mistake?

Yeah sure!

Please find attached screenshots for both ROOT (physical IF) and LAN (VLAN living in ROOT)