Messages

I will let you know once I have it at home :)

Hi there, I bought now - for a good price, a used E3372h-153
I hope it will get to my home in a couple days, then I will know more :)

Tried another USB port, but as I expected, no change. Any (not expensive) 4G dongle you would recommend?

edited!

I will try another USB port later!

As I borrowed this stick only, I will give it back I think.
Any recommendation for a better / easier working one?

So it's a thing of proper implementation in FreeBSD then?

Hi Franco,

thanks for the answer!

Code Select Expand

(cd0:umass-sim0:0:0:0): Error 5, Unretryable error
(cd0:umass-sim0:0:0:0): cddone: got error 0x5 back
(cd0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 00 0d ff 00 00 01 00
(cd0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(cd0:umass-sim0:0:0:0): SCSI status: Check Condition
(cd0:umass-sim0:0:0:0): SCSI sense: MEDIUM ERROR asc:11,0 (Unrecovered read error)
(cd0:umass-sim0:0:0:0): Info: 0xdff
(cd0:umass-sim0:0:0:0): Error 5, Unretryable error
(cd0:umass-sim0:0:0:0): cddone: got error 0x5 back
(cd0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 00 0d ff 00 00 01 00
(cd0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(cd0:umass-sim0:0:0:0): SCSI status: Check Condition
(cd0:umass-sim0:0:0:0): SCSI sense: MEDIUM ERROR asc:11,0 (Unrecovered read error)
(cd0:umass-sim0:0:0:0): Info: 0xdff
(cd0:umass-sim0:0:0:0): Error 5, Unretryable error
(cd0:umass-sim0:0:0:0): cddone: got error 0x5 back
(cd0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 00 0d c1 00 00 04 00
(cd0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(cd0:umass-sim0:0:0:0): SCSI status: Check Condition
(cd0:umass-sim0:0:0:0): SCSI sense: MEDIUM ERROR asc:11,0 (Unrecovered read error)
(cd0:umass-sim0:0:0:0): Info: 0xdc1
(cd0:umass-sim0:0:0:0): Error 5, Unretryable error
(cd0:umass-sim0:0:0:0): cddone: got error 0x5 back
(cd0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 00 0d ff 00 00 01 00
(cd0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(cd0:umass-sim0:0:0:0): SCSI status: Check Condition
(cd0:umass-sim0:0:0:0): SCSI sense: MEDIUM ERROR asc:11,0 (Unrecovered read error)
(cd0:umass-sim0:0:0:0): Info: 0xdff
(cd0:umass-sim0:0:0:0): Error 5, Unretryable error
(cd0:umass-sim0:0:0:0): cddone: got error 0x5 back
(cd0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 00 0d ff 00 00 01 00
(cd0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(cd0:umass-sim0:0:0:0): SCSI status: Check Condition
(cd0:umass-sim0:0:0:0): SCSI sense: MEDIUM ERROR asc:11,0 (Unrecovered read error)
(cd0:umass-sim0:0:0:0): Info: 0xdff
(cd0:umass-sim0:0:0:0): Error 5, Unretryable error
(cd0:umass-sim0:0:0:0): cddone: got error 0x5 back
umass0: at uhub3, port 3, addr 2 (disconnected)
cd0 at umass-sim0 bus 0 scbus2 target 0 lun 0
cd0: <HUAWEI Mass Storage 2.3M>  s/n 0123456789ABCDEF detached
(cd0:umass-sim0:0:0:0): Periph destroyed
umass0: detached
ugen2.2: <HUAWEIMOBILE HUAWEIMOBILE> at usbus2 (disconnected)
ugen2.2: <HUAWEIMOBILE HUAWEIMOBILE> at usbus2
cdce0 on uhub3
cdce0: <CDC Ethernet Control Model (ECM)> on usbus2
ue0: <USB Ethernet> on cdce0
ue0: Ethernet address: 00:1e:10:1f:00:00
ugen2.2: <HUAWEIMOBILE HUAWEIMOBILE> at usbus2 (disconnected)
cdce0: at uhub3, port 3, addr 2 (disconnected)
cdce0: detached

This is what I see in dmesg...

Ciao Franco,

thanks for the answer.
Not working though. Without any additional parameter it actually shows as

Code Select Expand

Bus /dev/usb Device /dev/ugen2.2: ID 12d1:14db Huawei Technologies Co., Ltd. E353/E3131

for a couple seconds.
Then it's MSD again.

I would be happy to help debugging here, if I know how!

OK, so it's not me doing something wrong  :D

Could any dev here maybe help out, or give some input?

Hi, I am trying to get a 4G dongle as backup.
Now this Huawei E3372 is not yet configured as ethernet devices...or as it should be ;)

This is the device:

Code Select Expand

root@OPNsense:~ # lsusb
Protocol spec without prior Class and Subclass spec at line 23281
Bus /dev/usb Device /dev/ugen2.2: ID 12d1:1f01 Huawei Technologies Co., Ltd. E353/E3131 (Mass storage mode)
[truncated]

This is what I am trying:

Code Select Expand

root@OPNsense:~ # usb_modeswitch -v 12d1 -p 1f01 -c /usr/local/share/usb_modeswitch/12d1:1f01
Look for target devices ...
No devices in target mode or class found
Look for default devices ...
Found devices in default mode (1)
Access device 002 on bus 002
Get the current device configuration ...
Current configuration number is 1
Use interface number 0
with class 8
Use endpoints 0x01 (out) and 0x81 (in)
Using standard Huawei switching message
Looking for active drivers ...
OK, driver detached
Set up interface 0
Use endpoint 0x01 for message sending ...
Trying to send message 1 to endpoint 0x01 ...
OK, message successfully sent
Read the response to message 1 (CSW) ...
Response reading failed (error -99)
Device is gone, skip any further commands
-> Run lsusb to note any changes. Bye!

After a moment, checking again:

Code Select Expand

root@OPNsense:~ # lsusb
Protocol spec without prior Class and Subclass spec at line 23281
Bus /dev/usb Device /dev/ugen2.2: ID 12d1:1f01 Huawei Technologies Co., Ltd. E353/E3131 (Mass storage mode)
[truncated]

So still in MSD mode.

Any idea here?

Thanks
ogghi