Messages

That did the trick! 🎉

Thanks Greelan for your help, I appreciated your support. 🙂

@Greelan, I've been trying to fix my setup and have got everything working except for port forwarding.

I have tried using nmap externally to see what is wrong and it shows that it is being filtered, but live view shows that it is being passed and redirected to the correct IP.

I have checked if the opnsense can connect with port probe and it is able to connect without issue.

Are you able to forward ports without issue?

@Greelan, I tried running traceroute on opnsense here are the results.

Code Select Expand

# /usr/sbin/traceroute6 -w 2 -m '18' -s 'fc00:bbbb:bbbb:bb01::2:7bd8'   '2606:4700:4700::1111'
traceroute6 to 2606:4700:4700::1111 (2606:4700:4700::1111) from fc00:bbbb:bbbb:bb01::2:7bd8, 18 hops max, 20 byte packets
1  fc00:bbbb:bbbb:bb01::1  20.729 ms  25.648 ms  21.192 ms
2  2400:fa80:1:11::1  23.273 ms  20.705 ms  22.750 ms
3  d5c:89d1:bc60:3::b  21.325 ms  25.349 ms  20.294 ms
4  d5c:89d1:bc60:3::a  21.198 ms  25.220 ms  20.966 ms
5  2402:1b80:1:11::36  20.337 ms  20.226 ms  23.783 ms
6  2402:1b80:1:11::26  25.638 ms  25.354 ms  21.307 ms
7  13335.syd.equinix.com  22.037 ms  40.306 ms  24.235 ms
8  2400:cb00:26:1024::6ca2:f850  23.891 ms
    2400:cb00:26:1024::6ca2:f892  26.773 ms
    2400:cb00:26:1024::6ca2:f836  25.054 ms

I had an issue where no matter what interface I choose to traceroute it would still go through the vpn. I solved this by changing the monitor ip in the gateways to monitor mullvads gateways instead.

I still need to do further testing.

It works ;D

Has anyone got ipv4 and ipv6 working at the same time? I can't specify two gateways for the local endpoint  :'(