Messages

Hi,

I just made a quick check on the SMART info of my SSD on which OPNsense runs.

I have a TBW of 430 TB, that is around 100 TBW per year running.

This is enormous and I wonder what setup is recommended to avoid burning SSD Drives within a few years.  It's a small setup with Zenarmor, ntopng, and HAProxy on top of the usual services (DNS, NTP, DHCP).  Nothing fancy and a few dozen different local IPs.

I have to replace my SSD ASAP, and I will put a spare that I have here, but if I keep a similar setup, it will be the same story.

Should I add a mechanical drive and map some of the logging to it ?

What are the best practices ?

Yay, I got it working.

Code Select Expand

pkg install -f -r OPNsense libgcrypt libgpg-error
Updating OPNsense repository catalogue...
OPNsense repository is up to date.
All repositories are up to date.
The following 2 package(s) will be affected (of 0 checked):

Installed packages to be UPGRADED:
libgpg-error: 1.48 -> 1.50 [OPNsense]

Installed packages to be REINSTALLED:
libgcrypt-1.11.0 [OPNsense]

Number of packages to be upgraded: 1
Number of packages to be reinstalled: 1

168 KiB to be downloaded.

Proceed with this action? [y/N]: y


Thanks, worked here as well !

Hi,

I'm having trouble (since today) accessing my server from within my LAN (internally) due to the self-signed certificate on the server itself (I'm OK from the outside as I have a good certificate on the opnsense).  The browsers now refuse an exception.

What can I do ?  Am I the only one ?

Thanks !

OK, fixed here also by enabling the default gateway (was disabled throughout).

Same problem, see https://forum.opnsense.org/index.php?topic=36688.msg179207#msg179207

I had the same problem, I reinstalled completely opnsense, but now it is asking to update to 23.7.7_3 for additional packages, which I have not yet done, fearing it will break again.

Same problem here.

Error due to SSL 1.1.1 then update failed.

I have tried the update again to be able to copy the logs, it passed, seemed to have worked but no more routing since reboot.

I cannot post logs as I am writing this from my phone.

What can I do?

The GUI works OK, but no packet routing and CPU load is super high, used by Python3.9.

Hello !

Any progress ?

I'm struggling on my side.

Thanks !

No one ?

Hi,

Is it possible to increase the SWAP size on an existing and running installation ?

If so, can you please provide the steps ?
If not, I need to reinstall and restore my config backup then ?

Thanks,
@lex