Messages

This is what I get and these are probably the statements of interest:

hw.ixl.enable_tx_fc_filter: 1
dev.em.0.fc_low_water: 20552
dev.em.0.fc_high_water: 23584
dev.em.0.fc: 3

---------------------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------------

root@IncsFW1:~ # sysctl -a | grep fc
device   ocs_fc
2 LABEL gptid/ffcdb6e8-434e-11eb-b1ee-64006a9003d0 209715200 512 i 0 o 0
z0xfffff80003a3ca00 [shape=box,label="DEV\ngptid/ffcdb6e8-434e-11eb-b1ee-64006a9003d0\nr#4"];
z0xfffff80003a3c800 [shape=hexagon,label="gptid/ffcdb6e8-434e-11eb-b1ee-64006a9003d0\nr0w0e0\nerr#0\nsector=512\nstripe=4096"];
      <name>gptid/ffcdb6e8-434e-11eb-b1ee-64006a9003d0</name>
       <rawuuid>ffcdb6e8-434e-11eb-b1ee-64006a9003d0</rawuuid>
       <efimedia>HD(1,GPT,ffcdb6e8-434e-11eb-b1ee-64006a9003d0,0x28,0x64000)</efimedia>
     <name>gptid/ffcdb6e8-434e-11eb-b1ee-64006a9003d0</name>
vfs.reassignbufcalls: 10443885
vfs.getnewbufcalls: 4196070
net.inet.ip.rfc6864: 1
net.inet.tcp.rfc1323: 1
net.inet.tcp.rfc3465: 1
net.inet.tcp.rfc3390: 1
net.inet.tcp.rfc3042: 1
net.inet.tcp.rfc6675_pipe: 0
net.link.generic.system.ifcount: 7
net.inet6.ip6.rfc6204w3: 1
net.inet6.icmp6.nd6_onlink_ns_rfc4861: 0
hw.ixl.enable_tx_fc_filter: 1
     ConventionalMemory 000000100000          0x0 0003befc UC WC WT WB
             LoaderData 00003bffc000          0x0 00004004 UC WC WT WB
dev.em.0.fc_low_water: 20552
dev.em.0.fc_high_water: 23584
dev.em.0.fc: 3

what would be the correct setting for disabling flow control with a Realtek driver?
hw.igb.0.fc=0 is for Intel as I understand.

my Nic cards show up as em0 and re0

thanks,