Messages

Hello everybody!
What i want is to play old games in LAN mode via openvpn with my friends.

Therefore i thought to create an instance in tap mode.
My clients can connect to the server but don't get an IP address assigned. Has somebody an idea what's the problem here?
Or are there some other things I have to do to get it work?

Kind regards

One last question, is it possible to realize name resolution from my lan to the vpn clients? When yes, how?

I found the solution in this post: https://superuser.com/questions/966832/windows-10-dns-resolution-via-vpn-connection-not-working
You have to set the metric of the vpn network adapter to a lower value than the normal adapter! :D:D
Thanks anyway for your help Gauss23 ;)

Hmm,

I connected my laptop over my smartphone hotspot and here it works... :<

I forgot sry, attached the firewall section and the nslookup
-> the client also has a fritzbox

The gateway for the pihole is the fritzbox (192.168.1.1), but there I added a static route (see attachment)
Ping from Pihole to client is also possible

Ok, I forgot to enable logging for the openvpn rules ...
But there are no floating firewall rules!
DNS requests are transported but not resolved at client side

That is correct, the fritzbox is the default gateway...
and I have absolutely no idea what's the problem :(
I sticked to the official road warrior tutorial

WHen I check my public IP with the client, it has the same as my router at home, this seems working...
A ping to my Pihole is also successful
My home network is 192.168.1.0/24 and the VPN network 10.10.0.0/24
I attached the logs, only one IPv6 packet was denied
192.168.1.26 is the IP of the opnsense server, 192.168.1.3 the pihole and 192.168.1.1 the fritzbox...

I am using a Pihole... but I didn't find settings for this except this, which is enabled (see attachment).

Hey guys,

I am having some trouble with the DNS stuff...
I successfully created the openvpn server on opnsense.
I also get clients to connect to it and all traffic goes over the server.
I have access to my home network but only while using the ip adress.
IPconfig on Windows shows, that my DNS server in my home network is published to the client.
What is wrong here?