Messages

Hi.
https://docs.opnsense.org/manual/how-tos/sslvpn_instance_roadwarrior.html#setup-ssl-vpn-road-warrior
is there a manual to setup new openvpn road warrior? link above have information only about openvpn tunnel

Hi!  i'm trying to setup LDAP + TOTP Open VPN server, ldap is working on win2019 server, but i got an error trying to select  Authentication containers. Any suggestions?

LDAP bind error [80090304: LdapErr: DSID-0C09056B, comment: AcceptSecurityContext error, data 20ee, v4f7c; Other (e.g., implementation specific) error]

Please help me fix this setup
opnsense local network 192.168.80.0/24
openvpn server with clients in 192.168.150/24 network and ipsec tunnel to another site with network 192.168.0.0/24
what should i do to make openvpn  clients from 10.10.0.0/24 see 192.168.0.0/24? I tried to add 192.168.0.0/24 to ipv4 local network in openvpn server, and change it to 192.168.0.0/16 not helped. When I'm pinging 192.168.80.100 in firewall log I see pings from openvpn subnet 150, when I'm pinging 192.168.0.50 in log I see pings from external opnsense ip. How can I fix routing?

I have a similar problem with 22.1.8_1 but it is not permanent. my smb shares are working most of the time, but sometimes they stopped working over ipsec tunnel while still pinging ok. after some time it will work again

I still cannot fix this issue. Anyone have any ideas how to troubleshoot? I discovered that my route rule from vpn network to lan was disabled, but enabling it didn't help. To recap: everything was working before update to 21.1.2
openvpn and site to site ipsec, after update open vpn is connecting, but traffic isn't going. Site to site ipsec is working normally. And I don't see anything related to vpn blocked in fw log

I think I have all needed rules. It was working before update. I set up everything based on Setup SSL VPN Road Warrior. I'm not very good with rules, usually  I just look in the logs, see what is wrongly denied and fix it, but in this situation there are no log entries regarding vpn ip's and target lan ip that I need to connect.
on the screen from the first post you can see that fw is allowing rdp connection, but it's still not working (worked before update)

I'm the only one with this problem? Please help me troubleshoot it!

Hi! I upgraded yesterday and my OpenVPN connections stopped working. Ipsec site2site is OK, but OpenVPN is broken. I can connect, but i cannot ping lan host or open smb. There is nothing wrong popping up in firewall log also.

Thanks a lot! it helped.

This part? should I put 192.168.50/24 in  IPv4 Local Network?

I have a similar problem. I completed this instruction https://docs.opnsense.org/manual/how-tos/sslvpn_client.html,
I can connect to VPN, I can ping 10.10.0.1 but  I cannot ping 192.168.50.0/24 which is my internal network.
how can I fix it? And  my usual method to watch Firewall log isn't working, there are no records of something blocked.