Messages

Same issue...

After loading the page, everything is fine for about 30 seconds. Then all the widgets stop working one by one. They don't refresh the information or show the error: "Failed to load widget".

In the www graphical interface log, the following entry appears: "(/usr/obj/usr/ports/www/lighttpd/work/lighttpd-1.4.76/src/h2.c.612) h2: xx.xx.xx.xx sent too many RST_STREAM too quickly".

Can this be tuned somehow?

Fixed in 2.7.8.
Thx a lot...

When trying to save the configuration (System=>Konfiguracja=>Kopie zapasowe), the following fatal error appears:

Fatal error: Uncaught ValueError: Unknown format specifier "t" in /usr/local/opnsense/mvc/app/library/OPNsense/Backup/GDrive.php:64 Stack trace: #0 /usr/local/opnsense/mvc/app/library/OPNsense/Backup/GDrive.php(64): sprintf('Do korzystania ...', '

I have been sending a "crash report" for several months, but the error has not been corrected.
Maybe this forum post will be noticed...

In general, everything works correctly. The problem only affects a few pages, but it is very annoying. Some elements of the page do not work.
E.g.: On the website "https://www.tokfm.pl/Tokfm/0,0.html" the "WŁĄCZ RADIO => TOK FM" button does not work. The radio should turn on, but nothing happens.
E.g. 2: On the "https://r.pl" website, after pressing the "Szukaj" (search) button, only 1 item is shown, instead of several dozen.

The same pages opened without Opensense are displayed correctly.

"zenarmor" is off.
"suricata" is off.
"squid" is off.
"netflow" is off.
"samplicate" is off.

Where could the problem lie? In the "pf" service? I can't turn this off.

I am trying to protect my local network from spam with the help of "rspamd"+"postfix" services.

I almost made it :)
1. postfix receives messages
2. rspamd filters messages
3. postfix is ​​NOT delivering messages to the target mail server - I'm stuck here.
Of course, I have set up a domain list. I also tried to set up Smart Host but to no avail.

After February 24, some popular sites (microsoft.com, windowsupdate.com, etc.) suddenly became unavailable. The problem concerns more and more sites. There is no error message. Only "timeout" appears. There is no information in the logs either. It looks like these sites are indeed inaccessible, but all I have to do is add them to the list of "unrectricted sites" and I have a problem with nothing.

What is it about? Does the web proxy use some kind of public blacklist that somebody hacks?

I also have the "intrusion detection" service running, but there is nothing in the logs either...

I rectified the problem by adding a "Restart IPsec service" action to the cron.
The restart takes about 3 seconds. Such a break is not a problem.
I hope that the problem will be permanently resolved after the next update.

I found something: Lifetime is 28,800 seconds. The error message says the maximum value is 28,188 seconds. However, this does not explain why connections are dropped and not renewed automatically.

Hi everyone.

I've had 3 site-to-site VPN connections via IPsec configured for years. There have never been the slightest connection problems.
After upgrading to version 22.1.8, all connections disconnect every few minutes. This is a very serious problem because the functioning of the university depends on the efficient connection between its branches. To reconnect I have to manually restart the service or connection.

Does anyone know the solution to the problem?

I had the same issue, but ssh is working...

Keep healthy
Paweł

Report has been sent.

Thx

Thank you for the quick reply.

I don't know what PR is. I need more detailed instruction.

I've been using Sensei for several months. I have 15 VLANs and about 500 users. There have never been any problems other than memory shortage sometimes. Yesterday I increased the amount of memory to 72GB. The Sensei took off and worked for several hours until I decided to increase the Deployment Size to Xlarge.
After changing the configuration, the Sensei did not start up:
Changing Deployment Size to Large did not help.
Reducing the number of protected VLANs did not help.
Reset to Sensei Factory Defaults did not help.
Reinstall Sensei Packet Engine did not help.

I found this entry in the log:
2020-10-21T09:45:22 INFO: Created LAN Interface igb0_vlan6 (igb0_vlan6, alias: lan0)
2020-10-21T09:45:22 CRITICAL: Failed to create WAN interface (igb0_vlan6^(igb0_vlan6^): 6(Device not configured)
2020-10-21T09:45:22 ERROR: Failed Initializing Interfaces, bailing out

Any idea what's next?

Yes. Of course.