Messages

I found thatI did not put the good mask for IP configuration my 10.0.0.10 server (/8 instead of /24) ...(champiooooon)

Ping and all other access are ok now ^^

you can close

Hello,
after having checked many topics, tuto...I decided to add another topic there...sorry ^^

My config:


          | -- opnsense:      WAH DHCP        -- 10.0.0.253              |
          |                                                                                                    |
ISP--|                                                                                                    | -- VIP 10.0.0.254 -- LAN 10.0.0.0/24
          |                                                                                                    |                                 
          | -- opnsense2: WAN DHCP (MAC spoof) -- 10.0.0.252 |


WG setup :
Instance: 10.0.10.1/24
Pair: 10.0.10.2/32
Carp dependency on VIP 10.0.0.254 checked

WG client :
authorized IP : 0.0.0.0/0

LAN FW:


WG FW:


WAN NAT:


Firewall let pass WG to LAN (10.0.0.10 is my internal DNS):


Symptoms : VPN client (android phone) connects to instance ok (handshake ok, WAN firewall rule is ok) on opnsense(master of the vip)
ping 10.0.0.254 (VIP) ok
ping 10.0.0.253 ok
ping to LAN addresses (10.0.0.10 for example) KO

Could you help me with this ?:)

Résolu : https://forum.opnsense.org/index.php?topic=15901.msg72811#msg72811

Great, ok is ok now, thank you very much ! ;D

Listener address : 127.0.0.1
Allowed hosts : 127.0.0.1 + ip of my nagios server

How can I make it reachable from the outside?

nothing excepted general logs :

[1581687468] Starting up daemon
[1581687468] Server listening on 127.0.0.1 port 5666.
[1581687468] Listening for connections on port 5666
[1581687468] Allowing connections from: 127.0.0.1,<nagios_server_ip>

the only rule is the allow any/any on LAN side

Hello

Already posted in French section, I try here...

I have a fresh install 20.1 upgraded into 20.1.1
I want to monitor the opnsense via a nagios server.
I installed the os-nrpe package via the WUI and configured it to listen to my nagios server.
All requests fall in a timeout error.
CHECK_NRPE STATE CRITICAL: Socket timeout after 10 seconds.
Nrpe service is up, the commands definition are ok, telnet localhost 5666 ok, but telnet opnsense from nagios server is ko.

Any idea?

Bonjour,

J'ai une install toute fraîche de la 20.1.
Je souhaite monitorer l'opnsense avec un serveur Nagios.
J'ai installé le paquet os-nrpe, configuré le serveur d'écoute pour accepter les requêtes de mon serveur nagios.
Mais toutes les requêtes nrpe tombent en timeout.
J'obtiens un bon vieux timout : CHECK_NRPE STATE CRITICAL: Socket timeout after 10 seconds.
Le service nrpe est bien up côté opnsense.

Avez-vous une piste?
Merci :)