Messages

when you try to download a file using http it does not download, i.e. protection works but does not display a warning page while https does not work

przy próbie pobrania pliku korzystając z http nie pobiera , czyli ochrona działa ale nie wyświetla strony ostrzegawczej natomiast prz https nie działa

ok I started clamav, :) now I have a problem setting clamav protection. doing a test on eicar does not display the warning page from clamav.

58/5000
Hello ,
I understand that I should download the signatures in the tmp directory?

maybe if you were so kind you would write a small tourtial as you started the anti-virus on your machine. As simple as for an amateur :)

after entering, freshclma downloads the files but does not finish the download. stops at around 97 mb etc

root@OPNsense:/var/db/clamav # freshclam
Sat Feb  1 22:22:18 2020 -> ClamAV update process started at Sat Feb  1 22:22:18 2020
Sat Feb  1 22:22:18 2020 -> ^[LibClamAV] cli_cvdparse: Not a CVD file
Sat Feb  1 22:22:18 2020 -> daily database available for download (remote version: 25713)
Time: 37.2s, ETA; 0.0s [=======================================>] 55.74MiB/55.74MiB
Sat Feb  1 22:22:57 2020 -> Testing database: '/var/db/clamav/tmp/clamav-61c0221544ffd174fbfaab7e1afce7d7.tmp-daily.cvd' ...
Sat Feb  1 22:23:03 2020 -> Database test passed.
Sat Feb  1 22:23:03 2020 -> daily.cvd updated (version: 25713, sigs: 2172237, f-level: 63, builder: raynman)
Sat Feb  1 22:23:03 2020 -> ^[LibClamAV] cli_cvdparse: Not a CVD file
Sat Feb  1 22:23:03 2020 -> main database available for download (remote version: 59)
Sat Feb  1 22:24:03 2020 -> ^Download failed (28) Sat Feb  1 22:24:03 2020 -> ^ Message: Timeout was reached
Sat Feb  1 22:24:03 2020 -> ^getcvd: Can't download main.cvd from http://database.clamav.net//main.cvd
Sat Feb  1 22:24:03 2020 -> Trying again in 5 secs...
Sat Feb  1 22:24:08 2020 -> ^[LibClamAV] cli_cvdparse: Not a CVD file
Sat Feb  1 22:24:08 2020 -> main database available for download (remote version: 59)
Sat Feb  1 22:25:08 2020 -> ^Download failed (28) Sat Feb  1 22:25:08 2020 -> ^ Message: Timeout was reached
Sat Feb  1 22:25:08 2020 -> ^getcvd: Can't download main.cvd from http://database.clamav.net//main.cvd
Sat Feb  1 22:25:08 2020 -> Trying again in 5 secs...
Sat Feb  1 22:25:13 2020 -> ^[LibClamAV] cli_cvdparse: Not a CVD file
Sat Feb  1 22:25:13 2020 -> main database available for download (remote version: 59)
^CSat Feb  1 22:25:19 2020 -> Update process terminated         ] 9.05MiB/112.40MiB

I deleted, then downloaded and the message as below


root@OPNsense:/var/db/clamav # wget http://database.clamav.net/main.cvd -o /var/db/clamav/main.cvd
root@OPNsense:/var/db/clamav # wget http://database.clamav.net/daily.cvd -o /var/db/clamav/daily.cvd
root@OPNsense:/var/db/clamav # wget http://database.clamav.net/bytecode.cvd -o /var/db/clamav/bytecode.cvd
root@OPNsense:/var/db/clamav # sudo clamd
LibClamAV Error: cli_cvdparse: Not a CVD file
LibClamAV Error: cli_loaddbdir(): error parsing header of /var/db/clamav/daily.cvd
Sat Feb  1 22:18:00 2020 -> !Malformed database
root@OPNsense:/var/db/clamav #
root@OPNsense:/var/db/clamav # ls
bytecode.cvd    bytecode.cvd.1  daily.cvd       daily.cvd.1     main.cvd        main.cvd.1      tmp
root@OPNsense:/var/db/clamav #
root@OPNsense:/var/db/clamav # rm bytecode.cvd.1
root@OPNsense:/var/db/clamav #
root@OPNsense:/var/db/clamav # rm daily.cvd.1
root@OPNsense:/var/db/clamav #
root@OPNsense:/var/db/clamav # rm  main.cvd.1
root@OPNsense:/var/db/clamav # ls
bytecode.cvd    daily.cvd       main.cvd        tmp
root@OPNsense:/var/db/clamav # sudo clamd
LibClamAV Error: cli_cvdparse: Not a CVD file
LibClamAV Error: cli_loaddbdir(): error parsing header of /var/db/clamav/daily.cvd
Sat Feb  1 22:19:45 2020 -> !Malformed database
root@OPNsense:/var/db/clamav #

maybe a colleague of Darkopnsense give a description of the clamav configuration using ssh.

I will be very grateful

this is obviously the log when trying to run clamav
Thank you

I do everything as described in this post. And unfortunately I get the answer as below. Does any of your colleagues have any advice

Thank you






LibClamAV Error: cli_cvdparse: Not a CVD file
LibClamAV Error: Can't load /var/db/clamav/main.cvd: Broken or not a CVD file
LibClamAV Error: cli_loaddbdir(): error loading database /var/db/clamav/main.cvd
Sat Feb  1 17:57:18 2020 -> !Broken or not a CVD file

my network configuration

internet  router---> 192.168.1.1-->>opnsense wan 192.168.1.221  lan 192.168.0.3 --- > cctv 192.168.0.155

cctv  port 6000  ; 6001 


i need to open port 6000 and 6001. on main router 192.168.1.1 router opnsense i added to DMZ (192.168.1.221) i want to redirect external traffic to cctv i have dynamic dns. configured. Please help . maybe someone remotely help me who has extensive experience through teamviewer.

thank you