Messages

Indeed, good point.

As far as I know, I am limited to one Interface(VLAN) per SSID (I have Unify APs) - so I have a physical max of Interfaces. If there is a way to have multiple VLANs per SSID (based on Mac-Address?) than I could split further by vendor of IoT or Rank of Familiy :D ..

Hi there.
I am using
10.0.0.0/8 for my LAN,
172.16.0.0/12 for IoT
and 192.168.0.0/16 for my Guest Network..

I know this is total overkill (e.g. I never had more than 1 guest so far)
but are there real disadvantages, is it a "bad idea"?

Yeah, Thanks, that is what I was looking for.
If it gives me 3 weeks of free time expect of try&error, it might be worth it!

Hi guys,

I have several problems with my OpnSense setup. Mostly, because I have choosen to use VLANs to separate IoT from LAN and I struggle with the understanding how to bring packages accross. A lot of packages go missing.
I probably need things like mDNS and IGMP proxy, firewall should isolate different subnets and connect others, at least one way. Let's summarize with: many questions

Is there somewhere I can get professionell support (german or english)? I would pay for that, as it will save me a lot of time that I don't have - we just built an house and kid nr 2 is arriving. All I found so far are business consultings, payed by "weeks". I just need an hour probably.

Yes, I could try to formulate those questions in the forum, and read through documentations, but again, the success rate is low because I am no professional network administrator and I have limited time.

best regards
PhiL

Well, 120 days later, I have come across the same problem :) I have openhab on my LAN 10.0.0.0/8 and my Xiaomi Yeetilight on a VLAN (172.16.0.0/12).
Have you (or maybe someone else?) figured this out? I too have no idea how to setup the igmp proxy, but "assume" that this is the right tool to solve the problem.
I am sending von LAN 

2:35:50.688256 IP OpenHab2DEV.localdomain.1982 > 239.255.255.250.1982: UDP, length 83
12:35:50.688392 IP OpenHab2DEV.localdomain.1982 > 239.255.255.250.1982: UDP, length 83
12:35:50.688488 IP OpenHab2DEV.localdomain.1982 > 239.255.255.250.1982: UDP, length 83
12:35:50.688530 IP OpenHab2DEV.localdomain.1982 > 239.255.255.250.1982: UDP, length 83

but nothing is receiving on the VLAN side. Opnsense is set to allow all from LAN.