1
21.7 Legacy Series / Re: [solved] HAProxy won't start after upgrade opnsense to OPNsense21.7.crt-list
« on: November 01, 2021, 07:34:37 am »
[solved]
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
21.7 Legacy Series / Re: HAProxy won't start after upgrade opnsense to OPNsense 21.7. crt-list' : cannot
« on: October 31, 2021, 10:58:48 pm »
Hi,
Thanks for your support.
Now it's working again. I reinforced fetching a new letsencrypt certificate before it will expire in Dec.
And voila the directory /tmp/haproxy/ssl/ isn't empty anymore.
Rene
Thanks for your support.
Now it's working again. I reinforced fetching a new letsencrypt certificate before it will expire in Dec.
And voila the directory /tmp/haproxy/ssl/ isn't empty anymore.
Rene
3
21.7 Legacy Series / Re: HAProxy won't start after upgrade opnsense to OPNsense 21.7. crt-list' : cannot
« on: October 31, 2021, 09:12:46 pm »
Hi Fright,
attached
Thanks,
Rene
attached
Thanks,
Rene
4
21.7 Legacy Series / Re: HAProxy won't start after upgrade opnsense to OPNsense 21.7. crt-list' : cannot
« on: October 31, 2021, 08:42:54 pm »
I got a message in our syslog server
[27490d40-3a1f-4558-9928-2bdd21e29407] Script action failed with Command '/usr/local/opnsense/scripts/OPNsense/HAProxy/syncCerts.py actions --output bootgrid --page-rows '10' --page '1' --search '' --sort-col '' --sort-dir ''' returned non-zero exit status 1. at Traceback (most recent call last): File /usr/local/opnsense/service/modules/processhandler.py, line 478, in execute subprocess.check_call(script_command, env=self.config_environment, shell=True, File /usr/local/lib/python3.8/subprocess.py, line 364, in check_call raise CalledProcessError(retcode, cmd) subprocess.CalledProcessError: Command '/usr/local/opnsense/scripts/OPNsense/HAProxy/syncCerts.py actions --output bootgrid --page-rows '10' --page '1' --search '' --sort-col '' --sort-dir ''' returned non-zero exit status 1.
Line 478 is marked bold
try:
with tempfile.NamedTemporaryFile() as error_stream:
with tempfile.NamedTemporaryFile() as output_stream:
subprocess.check_call(script_command, env=self.config_environment, shell=True,
stdout=output_stream, stderr=error_stream)
output_stream.seek(0)
error_stream.seek(0)
script_output = output_stream.read()
script_error_output = error_stream.read()
if len(script_error_output) > 0:
syslog_error('[%s] Script action stderr returned "%s"' %(
message_uuid, script_error_output.strip()[:255]
))
return script_output.decode()
except Exception as script_exception:
syslog_error('[%s] Script action failed with %s at %s' % (
message_uuid, script_exception, traceback.format_exc()
))
return 'Execute error'
[27490d40-3a1f-4558-9928-2bdd21e29407] Script action failed with Command '/usr/local/opnsense/scripts/OPNsense/HAProxy/syncCerts.py actions --output bootgrid --page-rows '10' --page '1' --search '' --sort-col '' --sort-dir ''' returned non-zero exit status 1. at Traceback (most recent call last): File /usr/local/opnsense/service/modules/processhandler.py, line 478, in execute subprocess.check_call(script_command, env=self.config_environment, shell=True, File /usr/local/lib/python3.8/subprocess.py, line 364, in check_call raise CalledProcessError(retcode, cmd) subprocess.CalledProcessError: Command '/usr/local/opnsense/scripts/OPNsense/HAProxy/syncCerts.py actions --output bootgrid --page-rows '10' --page '1' --search '' --sort-col '' --sort-dir ''' returned non-zero exit status 1.
Line 478 is marked bold
try:
with tempfile.NamedTemporaryFile() as error_stream:
with tempfile.NamedTemporaryFile() as output_stream:
subprocess.check_call(script_command, env=self.config_environment, shell=True,
stdout=output_stream, stderr=error_stream)
output_stream.seek(0)
error_stream.seek(0)
script_output = output_stream.read()
script_error_output = error_stream.read()
if len(script_error_output) > 0:
syslog_error('[%s] Script action stderr returned "%s"' %(
message_uuid, script_error_output.strip()[:255]
))
return script_output.decode()
except Exception as script_exception:
syslog_error('[%s] Script action failed with %s at %s' % (
message_uuid, script_exception, traceback.format_exc()
))
return 'Execute error'
5
21.7 Legacy Series / Re: HAProxy won't start after upgrade opnsense to OPNsense 21.7. crt-list' : cannot
« on: October 31, 2021, 08:36:02 pm »
# configctl haproxy start
Error (1)
Log files - backend log
2021-10-31T20:31:55 configd.py[80385] [c23a223e-7710-4dcc-acd3-1036453abe6f] Show log
2021-10-31T20:31:46 configd.py[80385] [443c78c0-bc13-46e0-8074-b9cc2239c202] returned exit status 1
2021-10-31T20:31:45 configd.py[80385] [a7066062-0a1e-4f30-a8cf-4c300257bf03] request pf current overall table record count and table-entries limit
2021-10-31T20:31:45 configd.py[80385] [f149fe45-da60-42ef-89d6-f94a53a9074b] request pf current overall table record count and table-entries limit
2021-10-31T20:31:44 configd.py[80385] [92679197-8689-47bd-872a-0e2d8f385063] request pf current overall table record count and table-entries limit
2021-10-31T20:31:43 configd.py[80385] [8fc214dc-9cf7-44b9-9390-5560e1b6ace3] request pf current overall table record count and table-entries limit
2021-10-31T20:31:43 configd.py[80385] [443c78c0-bc13-46e0-8074-b9cc2239c202] starting haproxy
2021-10-31T20:31:20 configd.py[80385] [cf4aa895-3fd6-4e95-b76b-35bcc7655272] Show log
# service haproxy start
[ALERT] 303/202857 (76508) : parsing [/usr/local/etc/haproxy.conf:46] : 'bind x.x.x.222:8448' : 'crt-list' : cannot open file '/tmp/haproxy/ssl/5f786192aa1931.32444913.certlist' : No such file or directory
[ALERT] 303/202857 (76508) : parsing [/usr/local/etc/haproxy.conf:47] : 'bind x.x.x.222:443' : 'crt-list' : cannot open file '/tmp/haproxy/ssl/5f786192aa1931.32444913.certlist' : No such file or directory
[ALERT] 303/202857 (76508) : Error(s) found in configuration file : /usr/local/etc/haproxy.conf
[ALERT] 303/202857 (76508) : Fatal errors found in configuration.
/usr/local/etc/rc.d/haproxy: WARNING: failed precmd routine for haproxy
# ls -al /usr/local/etc/haproxy.conf
-rw-r--r-- 1 root wheel 4642 Sep 30 11:25 /usr/local/etc/haproxy.conf
Error (1)
Log files - backend log
2021-10-31T20:31:55 configd.py[80385] [c23a223e-7710-4dcc-acd3-1036453abe6f] Show log
2021-10-31T20:31:46 configd.py[80385] [443c78c0-bc13-46e0-8074-b9cc2239c202] returned exit status 1
2021-10-31T20:31:45 configd.py[80385] [a7066062-0a1e-4f30-a8cf-4c300257bf03] request pf current overall table record count and table-entries limit
2021-10-31T20:31:45 configd.py[80385] [f149fe45-da60-42ef-89d6-f94a53a9074b] request pf current overall table record count and table-entries limit
2021-10-31T20:31:44 configd.py[80385] [92679197-8689-47bd-872a-0e2d8f385063] request pf current overall table record count and table-entries limit
2021-10-31T20:31:43 configd.py[80385] [8fc214dc-9cf7-44b9-9390-5560e1b6ace3] request pf current overall table record count and table-entries limit
2021-10-31T20:31:43 configd.py[80385] [443c78c0-bc13-46e0-8074-b9cc2239c202] starting haproxy
2021-10-31T20:31:20 configd.py[80385] [cf4aa895-3fd6-4e95-b76b-35bcc7655272] Show log
# service haproxy start
[ALERT] 303/202857 (76508) : parsing [/usr/local/etc/haproxy.conf:46] : 'bind x.x.x.222:8448' : 'crt-list' : cannot open file '/tmp/haproxy/ssl/5f786192aa1931.32444913.certlist' : No such file or directory
[ALERT] 303/202857 (76508) : parsing [/usr/local/etc/haproxy.conf:47] : 'bind x.x.x.222:443' : 'crt-list' : cannot open file '/tmp/haproxy/ssl/5f786192aa1931.32444913.certlist' : No such file or directory
[ALERT] 303/202857 (76508) : Error(s) found in configuration file : /usr/local/etc/haproxy.conf
[ALERT] 303/202857 (76508) : Fatal errors found in configuration.
/usr/local/etc/rc.d/haproxy: WARNING: failed precmd routine for haproxy
# ls -al /usr/local/etc/haproxy.conf
-rw-r--r-- 1 root wheel 4642 Sep 30 11:25 /usr/local/etc/haproxy.conf
6
21.7 Legacy Series / Re: HAProxy won't start after upgrade opnsense to OPNsense 21.7. crt-list' : cannot
« on: October 31, 2021, 08:14:53 pm »Hi Fright,
# opnsense-patch -c plugins 31b82cd 18cd9f6
Found local copy of 31b82cd, skipping fetch.
Found local copy of 18cd9f6, skipping fetch.
Hmm... Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|From 31b82cdd2e43724c3e1873821e961469b99433db Mon Sep 17 00:00:00 2001
|From: kulikov-a <36099472+kulikov-a@users.noreply.github.com>
|Date: Thu, 28 Oct 2021 20:32:48 +0300
|Subject: [PATCH] typo
|
|---
| .../opnsense/service/templates/OPNsense/HAProxy/haproxy.conf | 2 +-
| 1 file changed, 1 insertion(+), 1 deletion(-)
|
|diff --git a/net/haproxy/src/opnsense/service/templates/OPNsense/HAProxy/haproxy.conf b/net/haproxy/src/opnsense/service/templates/OPNsense/HAProxy/haproxy.conf
|index 7d11f3df99..d6e0624ef3 100644
|--- a/net/haproxy/src/opnsense/service/templates/OPNsense/HAProxy/haproxy.conf
|+++ b/net/haproxy/src/opnsense/service/templates/OPNsense/HAProxy/haproxy.conf
--------------------------
Patching file opnsense/service/templates/OPNsense/HAProxy/haproxy.conf using Plan A...
Hunk #1 succeeded at 131.
done
Hmm... Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|From 18cd9f647799b061371e9c0eabbeefd5da12c78b Mon Sep 17 00:00:00 2001
|From: kulikov-a <36099472+kulikov-a@users.noreply.github.com>
|Date: Thu, 28 Oct 2021 20:34:26 +0300
|Subject: [PATCH] indentfirst->first
|
|https://jinja.palletsprojects.com/en/3.0.x/templates/#jinja-filters.indent
|---
| .../opnsense/service/templates/OPNsense/HAProxy/sslCerts.yaml | 2 +-
| 1 file changed, 1 insertion(+), 1 deletion(-)
|
|diff --git a/net/haproxy/src/opnsense/service/templates/OPNsense/HAProxy/sslCerts.yaml b/net/haproxy/src/opnsense/service/templates/OPNsense/HAProxy/sslCerts.yaml
|index fd766e0025..2f7d7a4eec 100644
|--- a/net/haproxy/src/opnsense/service/templates/OPNsense/HAProxy/sslCerts.yaml
|+++ b/net/haproxy/src/opnsense/service/templates/OPNsense/HAProxy/sslCerts.yaml
--------------------------
Patching file opnsense/service/templates/OPNsense/HAProxy/sslCerts.yaml using Plan A...
Hunk #1 succeeded at 53.
done
All patches have been applied successfully. Have a nice day.
# service haproxy start
[ALERT] 303/200545 (60557) : parsing [/usr/local/etc/haproxy.conf:46] : 'bind x.x.x.222:8448' : 'crt-list' : cannot open file '/tmp/haproxy/ssl/5f786192aa1931.32444913.certlist' : No such file or directory
[ALERT] 303/200545 (60557) : parsing [/usr/local/etc/haproxy.conf:47] : 'bind x.x.x.222:443' : 'crt-list' : cannot open file '/tmp/haproxy/ssl/5f786192aa1931.32444913.certlist' : No such file or directory
[ALERT] 303/200545 (60557) : Error(s) found in configuration file : /usr/local/etc/haproxy.conf
[ALERT] 303/200545 (60557) : Fatal errors found in configuration.
/usr/local/etc/rc.d/haproxy: WARNING: failed precmd routine for haproxy
Now, there is no entry in the Backend Log about HAProxy
...
2021-10-31T20:08:14 configd.py[80385] [5d9fa72c-8768-4771-88a6-ced27154973a] request pf current overall table record count and table-entries limit
2021-10-31T20:08:10 configd.py[80385] [9583790e-65f7-45ca-adab-c37f7bc1cd9a] Show log
2021-10-31T20:08:00 configd.py[80385] [42a22034-7f06-4949-b9bc-dc29c15b3f6c] rsyncing certs to matrix
...
haproxy -c -f /usr/local/etc/haproxy.conf
[NOTICE] 303/201000 (21827) : haproxy version is 2.2.17-dd94a25
[ALERT] 303/201000 (21827) : parsing [/usr/local/etc/haproxy.conf:46] : 'bind x.x.x.222:8448' : 'crt-list' : cannot open file '/tmp/haproxy/ssl/5f786192aa1931.32444913.certlist' : No such file or directory
[ALERT] 303/201000 (21827) : parsing [/usr/local/etc/haproxy.conf:47] : 'bind x.x.x.222:443' : 'crt-list' : cannot open file '/tmp/haproxy/ssl/5f786192aa1931.32444913.certlist' : No such file or directory
[ALERT] 303/201000 (21827) : Error(s) found in configuration file : /usr/local/etc/haproxy.conf
[ALERT] 303/201000 (21827) : Fatal errors found in configuration.
The same message via GUI HAProxy - Settings - Test syntax
HAProxy - Config Export - Config Diff shows:
--- /usr/local/etc/haproxy.conf 2021-09-30 11:25:27.265579000 +0200
+++ /usr/local/etc/haproxy.conf.staging 2021-10-31 20:10:34.197483000 +0100
@@ -11,6 +11,7 @@
stats socket /var/run/haproxy.socket group proxy mode 775 level admin
nbproc 1
nbthread 1
+ hard-stop-after 60s
tune.ssl.default-dh-param 1024
spread-checks 0
tune.chksize 16384
@@ -91,7 +92,7 @@
# tuning options
timeout connect 30s
timeout server 30s
- server matrix.bci.local x.x.x.22:8448 ssl alpn h2,http/1.1 verify none cookie 5f7865de6d0ed749902345
+ server matrix.bci.local x.x.x.22:8448 ssl alpn h2,http/1.1 verify none resolve-prefer ipv4 cookie 5f7865de6d0ed749902345
# Backend: acme_challenge_backend (Added by Let's Encrypt plugin)
backend acme_challenge_backend
@@ -105,7 +106,7 @@
timeout connect 30s
timeout server 30s
http-reuse safe
- server acme_challenge_host 127.0.0.1:43580
+ server acme_challenge_host 127.0.0.1:43580 resolve-prefer ipv4
listen local_statistics
bind 127.0.0.1:8822
Thanks,
Rene
7
21.7 Legacy Series / Re: HAProxy won't start after upgrade opnsense to OPNsense 21.7. crt-list' : cannot
« on: October 31, 2021, 07:55:41 pm »
Versions OPNsense 21.7.4-amd64
FreeBSD 12.1-RELEASE-p20-HBSD
OpenSSL 1.1.1l 24 Aug 2021
CPU type Intel(R) Celeron(R) CPU J3160 @ 1.60GHz (4 cores)
FreeBSD 12.1-RELEASE-p20-HBSD
OpenSSL 1.1.1l 24 Aug 2021
CPU type Intel(R) Celeron(R) CPU J3160 @ 1.60GHz (4 cores)
8
21.7 Legacy Series / Re: HAProxy won't start after upgrade opnsense to OPNsense 21.7. crt-list' : cannot
« on: October 31, 2021, 07:54:47 pm »Hi Fright,
the output of both commands are still in my ssh session:
# opnsense-patch -c plugins 31b82cd 18cd9f6
Fetched 31b82cd via https://github.com/opnsense/plugins
Fetched 18cd9f6 via https://github.com/opnsense/plugins
Hmm... Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|From 31b82cdd2e43724c3e1873821e961469b99433db Mon Sep 17 00:00:00 2001
|From: kulikov-a <36099472+kulikov-a@users.noreply.github.com>
|Date: Thu, 28 Oct 2021 20:32:48 +0300
|Subject: [PATCH] typo
|
|---
| .../opnsense/service/templates/OPNsense/HAProxy/haproxy.conf | 2 +-
| 1 file changed, 1 insertion(+), 1 deletion(-)
|
|diff --git a/net/haproxy/src/opnsense/service/templates/OPNsense/HAProxy/haproxy.conf b/net/haproxy/src/opnsense/service/templates/OPNsense/HAProxy/haproxy.conf
|index 7d11f3df99..d6e0624ef3 100644
|--- a/net/haproxy/src/opnsense/service/templates/OPNsense/HAProxy/haproxy.conf
|+++ b/net/haproxy/src/opnsense/service/templates/OPNsense/HAProxy/haproxy.conf
--------------------------
Patching file opnsense/service/templates/OPNsense/HAProxy/haproxy.conf using Plan A...
Hunk #1 succeeded at 131.
done
Hmm... Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|From 18cd9f647799b061371e9c0eabbeefd5da12c78b Mon Sep 17 00:00:00 2001
|From: kulikov-a <36099472+kulikov-a@users.noreply.github.com>
|Date: Thu, 28 Oct 2021 20:34:26 +0300
|Subject: [PATCH] indentfirst->first
|
|https://jinja.palletsprojects.com/en/3.0.x/templates/#jinja-filters.indent
|---
| .../opnsense/service/templates/OPNsense/HAProxy/sslCerts.yaml | 2 +-
| 1 file changed, 1 insertion(+), 1 deletion(-)
|
|diff --git a/net/haproxy/src/opnsense/service/templates/OPNsense/HAProxy/sslCerts.yaml b/net/haproxy/src/opnsense/service/templates/OPNsense/HAProxy/sslCerts.yaml
|index fd766e0025..2f7d7a4eec 100644
|--- a/net/haproxy/src/opnsense/service/templates/OPNsense/HAProxy/sslCerts.yaml
|+++ b/net/haproxy/src/opnsense/service/templates/OPNsense/HAProxy/sslCerts.yaml
--------------------------
Patching file opnsense/service/templates/OPNsense/HAProxy/sslCerts.yaml using Plan A...
Hunk #1 succeeded at 53.
done
All patches have been applied successfully. Have a nice day.
#
# opnsense-patch -c plugins b1953fc
Fetched b1953fc via https://github.com/opnsense/plugins
Hmm... Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|From 31b82cdd2e43724c3e1873821e961469b99433db Mon Sep 17 00:00:00 2001
|From: kulikov-a <36099472+kulikov-a@users.noreply.github.com>
|Date: Thu, 28 Oct 2021 20:32:48 +0300
|Subject: [PATCH 1/2] typo
|
|---
| .../opnsense/service/templates/OPNsense/HAProxy/haproxy.conf | 2 +-
| 1 file changed, 1 insertion(+), 1 deletion(-)
|
|diff --git a/net/haproxy/src/opnsense/service/templates/OPNsense/HAProxy/haproxy.conf b/net/haproxy/src/opnsense/service/templates/OPNsense/HAProxy/haproxy.conf
|index 7d11f3df99..d6e0624ef3 100644
|--- a/net/haproxy/src/opnsense/service/templates/OPNsense/HAProxy/haproxy.conf
|+++ b/net/haproxy/src/opnsense/service/templates/OPNsense/HAProxy/haproxy.conf
--------------------------
Patching file opnsense/service/templates/OPNsense/HAProxy/haproxy.conf using Plan A...
Reversed (or previously applied) patch detected! Assuming -R.Hunk #1 succeeded at 131.
Hmm... The next patch looks like a unified diff to me...
The text leading up to this was:
--------------------------
|
|From 18cd9f647799b061371e9c0eabbeefd5da12c78b Mon Sep 17 00:00:00 2001
|From: kulikov-a <36099472+kulikov-a@users.noreply.github.com>
|Date: Thu, 28 Oct 2021 20:34:26 +0300
|Subject: [PATCH 2/2] indentfirst->first
|
|https://jinja.palletsprojects.com/en/3.0.x/templates/#jinja-filters.indent
|---
| .../opnsense/service/templates/OPNsense/HAProxy/sslCerts.yaml | 2 +-
| 1 file changed, 1 insertion(+), 1 deletion(-)
|
|diff --git a/net/haproxy/src/opnsense/service/templates/OPNsense/HAProxy/sslCerts.yaml b/net/haproxy/src/opnsense/service/templates/OPNsense/HAProxy/sslCerts.yaml
|index fd766e0025..2f7d7a4eec 100644
|--- a/net/haproxy/src/opnsense/service/templates/OPNsense/HAProxy/sslCerts.yaml
|+++ b/net/haproxy/src/opnsense/service/templates/OPNsense/HAProxy/sslCerts.yaml
--------------------------
Patching file opnsense/service/templates/OPNsense/HAProxy/sslCerts.yaml using Plan A...
Reversed (or previously applied) patch detected! Assuming -R.Hunk #1 succeeded at 53.
done
All patches have been applied successfully. Have a nice day.
Thanks,
Rene
9
21.7 Legacy Series / Re: HAProxy won't start after upgrade opnsense to OPNsense 21.7. crt-list' : cannot
« on: October 31, 2021, 07:35:39 pm »
Hi Fright,
unable to start the HAProxy service via GUI.
Tried this via ssh service haproxy start
here a the log entries from Log Files -> Backend
I don't know what </usr/local/opnsense/scripts/OPNsense/HAProxy/syncCerts.py> is trying, but when HAproxy start fails, it's always logging: ...'crt-list' : cannot open file '/tmp/haproxy/ssl/5f786192aa1931.32444913.certlist' : No such file or directory...
letsencrypt certs are valid, just refreshed after the letsencrypt intermediate change end of September.
HAProxy was running fine until 2pm today. Stopped serving after opnsense update & reboot.
Thanks for your help!
Rene
Date
Process
Line
2021-10-31T19:28:13 configd.py[80385] [35d7aded-7bdf-4e3f-a45f-4c5000f00b5a] Show log
2021-10-31T19:28:07 configd.py[80385] [7de597f1-dca2-486e-bd16-37185d7701c6] request pf current overall table record count and table-entries limit
2021-10-31T19:28:04 configd.py[80385] [6745bdc6-195b-47a2-9e40-b0f4908359d1] Show log
2021-10-31T19:28:00 configd.py[80385] [f0f98d92-1693-4fae-b49b-fc482f07ad60] rsyncing certs to matrix
2021-10-31T19:27:47 configd.py[80385] [6e4e18f9-ab6b-46ee-bab3-3dfa734b8753] Show log
2021-10-31T19:27:00 configd.py[80385] [d8199760-9350-4dc4-bee6-b5997914293f] rsyncing certs to matrix
2021-10-31T19:26:07 configd.py[80385] [14b53d8f-4304-42bc-b546-cf1aa2822bb9] request pf current overall table record count and table-entries limit
2021-10-31T19:26:00 configd.py[80385] [1df24f88-39c2-44b4-8fac-1116340e4fa4] rsyncing certs to matrix
2021-10-31T19:25:26 configd.py[80385] [381242fc-5948-4396-a738-c003b9d12b99] Show log
2021-10-31T19:25:14 configd.py[80385] [089899d8-7a21-46eb-90af-053f0ef74625] requesting haproxy status
2021-10-31T19:25:09 configd.py[80385] [2d7d8553-25dd-41ce-b062-da16cf32e5c4] requesting haproxy status
2021-10-31T19:25:01 configd.py[80385] [9a4fd2f0-e132-48a2-8139-cce3214c0150] Script action failed with Command '/usr/local/opnsense/scripts/OPNsense/HAProxy/syncCerts.py actions --output bootgrid --page-rows '10' --page '1' --search '' --sort-col '' --sort-dir ''' returned non-zero exit status 1. at Traceback (most recent call last): File "/usr/local/opnsense/service/modules/processhandler.py", line 478, in execute subprocess.check_call(script_command, env=self.config_environment, shell=True, File "/usr/local/lib/python3.8/subprocess.py", line 364, in check_call raise CalledProcessError(retcode, cmd) subprocess.CalledProcessError: Command '/usr/local/opnsense/scripts/OPNsense/HAProxy/syncCerts.py actions --output bootgrid --page-rows '10' --page '1' --search '' --sort-col '' --sort-dir ''' returned non-zero exit status 1.
2021-10-31T19:25:00 configd.py[80385] [a7ce6c55-c6ba-48a3-8e3d-ed343a65ae81] Script action failed with Command '/usr/local/opnsense/scripts/OPNsense/HAProxy/socketCommand.py show-servers --output bootstrap --page-rows '10' --page '1' --search '' --sort-col '' --sort-dir ''' returned non-zero exit status 1. at Traceback (most recent call last): File "/usr/local/opnsense/service/modules/processhandler.py", line 478, in execute subprocess.check_call(script_command, env=self.config_environment, shell=True, File "/usr/local/lib/python3.8/subprocess.py", line 364, in check_call raise CalledProcessError(retcode, cmd) subprocess.CalledProcessError: Command '/usr/local/opnsense/scripts/OPNsense/HAProxy/socketCommand.py show-servers --output bootstrap --page-rows '10' --page '1' --search '' --sort-col '' --sort-dir ''' returned non-zero exit status 1.
2021-10-31T19:25:00 configd.py[80385] [9a4fd2f0-e132-48a2-8139-cce3214c0150] Show certificate diff list
2021-10-31T19:25:00 configd.py[80385] [99f9e40d-dd2d-4b0e-a769-4d15f669988e] Inline action failed with OPNsense/HAProxy OPNsense/HAProxy/haproxy.conf expected token ',', got 'integer' at Traceback (most recent call last): File "/usr/local/opnsense/service/modules/template.py", line 247, in _generate j2_page = self._j2_env.get_template(template_filename) File "/usr/local/lib/python3.8/site-packages/jinja2/environment.py", line 997, in get_template return self._load_template(name, globals) File "/usr/local/lib/python3.8/site-packages/jinja2/environment.py", line 958, in _load_template template = self.loader.load(self, name, self.make_globals(globals)) File "/usr/local/lib/python3.8/site-packages/jinja2/loaders.py", line 137, in load code = environment.compile(source, name, filename) File "/usr/local/lib/python3.8/site-packages/jinja2/environment.py", line 757, in compile self.handle_exception(source=source_hint) File "/usr/local/lib/python3.8/site-packages/jinja2/environment.py", line 925, in handle_exception raise rewrite_traceback_stack(source=source) File "/usr/local/opnsense/service/modules/../templates/OPNsense/HAProxy/haproxy.conf", line 136, in template {% set acl_enabled = '0' %} jinja2.exceptions.TemplateSyntaxError: expected token ',', got 'integer' During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/local/opnsense/service/modules/processhandler.py", line 506, in execute return ph_inline_actions.execute(self, inline_act_parameters) File "/usr/local/opnsense/service/modules/ph_inline_actions.py", line 51, in execute filenames = tmpl.generate(parameters) File "/usr/local/opnsense/service/modules/template.py", line 341, in generate raise render_exception File "/usr/local/opnsense/service/modules/template.py", line 332, in generate for filename in self._generate(template_name, create_directory): File "/us
2021-10-31T19:25:00 configd.py[80385] [a7ce6c55-c6ba-48a3-8e3d-ed343a65ae81] show server status list
2021-10-31T19:25:00 configd.py[80385] [a723fbf5-9564-441b-a684-7cc92953f1ae] Inline action failed with OPNsense/HAProxy OPNsense/HAProxy/haproxy.conf expected token ',', got 'integer' at Traceback (most recent call last): File "/usr/local/opnsense/service/modules/template.py", line 247, in _generate j2_page = self._j2_env.get_template(template_filename) File "/usr/local/lib/python3.8/site-packages/jinja2/environment.py", line 997, in get_template return self._load_template(name, globals) File "/usr/local/lib/python3.8/site-packages/jinja2/environment.py", line 958, in _load_template template = self.loader.load(self, name, self.make_globals(globals)) File "/usr/local/lib/python3.8/site-packages/jinja2/loaders.py", line 137, in load code = environment.compile(source, name, filename) File "/usr/local/lib/python3.8/site-packages/jinja2/environment.py", line 757, in compile self.handle_exception(source=source_hint) File "/usr/local/lib/python3.8/site-packages/jinja2/environment.py", line 925, in handle_exception raise rewrite_traceback_stack(source=source) File "/usr/local/opnsense/service/modules/../templates/OPNsense/HAProxy/haproxy.conf", line 136, in template {% set acl_enabled = '0' %} jinja2.exceptions.TemplateSyntaxError: expected token ',', got 'integer' During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/local/opnsense/service/modules/processhandler.py", line 506, in execute return ph_inline_actions.execute(self, inline_act_parameters) File "/usr/local/opnsense/service/modules/ph_inline_actions.py", line 51, in execute filenames = tmpl.generate(parameters) File "/usr/local/opnsense/service/modules/template.py", line 341, in generate raise render_exception File "/usr/local/opnsense/service/modules/template.py", line 332, in generate for filename in self._generate(template_name, create_directory): File "/us
2021-10-31T19:25:00 configd.py[80385] [82fb7b54-06a8-4c14-9333-e86724372bf4] rsyncing certs to matrix
2021-10-31T19:25:00 configd.py[80385] generate template container OPNsense/HAProxy
2021-10-31T19:25:00 configd.py[80385] generate template container OPNsense/HAProxy
2021-10-31T19:24:59 configd.py[80385] [a723fbf5-9564-441b-a684-7cc92953f1ae] generate template OPNsense/HAProxy
2021-10-31T19:24:59 configd.py[80385] [99f9e40d-dd2d-4b0e-a769-4d15f669988e] generate template OPNsense/HAProxy
2021-10-31T19:24:58 configd.py[80385] [6752389e-7929-4691-bd04-74db80a42fa0] requesting haproxy statistics
2021-10-31T19:24:58 configd.py[80385] [9040b850-bb0e-48cd-b911-037851d4e24c] requesting haproxy statistics
2021-10-31T19:24:58 configd.py[80385] [efda7f86-4f7d-4528-9362-e42b7410bc39] requesting haproxy statistics
2021-10-31T19:24:26 configd.py[80385] [3950c3c5-2d22-4331-9dbd-d532411180be] Show log
2021-10-31T19:24:14 configd.py[80385] [7c0951f4-402a-47f4-b5af-0b7a22ac25c3] requesting haproxy status
2021-10-31T19:24:06 configd.py[80385] [fc69ddb2-6fd4-4a6e-9bea-e6f3c9787963] request pf current overall table record count and table-entries limit
2021-10-31T19:24:00 configd.py[80385] [b1487d67-84b8-4776-b513-b2cd06aa48dc] rsyncing certs to matrix
2021-10-31T19:23:00 configd.py[80385] [6f28862e-7444-4e3f-a89a-edcd4f35bbe7] rsyncing certs to matrix
2021-10-31T19:22:06 configd.py[80385] [37aab7ee-d323-421c-849d-981babe6eb54] request pf current overall table record count and table-entries limit
unable to start the HAProxy service via GUI.
Tried this via ssh service haproxy start
here a the log entries from Log Files -> Backend
I don't know what </usr/local/opnsense/scripts/OPNsense/HAProxy/syncCerts.py> is trying, but when HAproxy start fails, it's always logging: ...'crt-list' : cannot open file '/tmp/haproxy/ssl/5f786192aa1931.32444913.certlist' : No such file or directory...
letsencrypt certs are valid, just refreshed after the letsencrypt intermediate change end of September.
HAProxy was running fine until 2pm today. Stopped serving after opnsense update & reboot.
Thanks for your help!
Rene
Date
Process
Line
2021-10-31T19:28:13 configd.py[80385] [35d7aded-7bdf-4e3f-a45f-4c5000f00b5a] Show log
2021-10-31T19:28:07 configd.py[80385] [7de597f1-dca2-486e-bd16-37185d7701c6] request pf current overall table record count and table-entries limit
2021-10-31T19:28:04 configd.py[80385] [6745bdc6-195b-47a2-9e40-b0f4908359d1] Show log
2021-10-31T19:28:00 configd.py[80385] [f0f98d92-1693-4fae-b49b-fc482f07ad60] rsyncing certs to matrix
2021-10-31T19:27:47 configd.py[80385] [6e4e18f9-ab6b-46ee-bab3-3dfa734b8753] Show log
2021-10-31T19:27:00 configd.py[80385] [d8199760-9350-4dc4-bee6-b5997914293f] rsyncing certs to matrix
2021-10-31T19:26:07 configd.py[80385] [14b53d8f-4304-42bc-b546-cf1aa2822bb9] request pf current overall table record count and table-entries limit
2021-10-31T19:26:00 configd.py[80385] [1df24f88-39c2-44b4-8fac-1116340e4fa4] rsyncing certs to matrix
2021-10-31T19:25:26 configd.py[80385] [381242fc-5948-4396-a738-c003b9d12b99] Show log
2021-10-31T19:25:14 configd.py[80385] [089899d8-7a21-46eb-90af-053f0ef74625] requesting haproxy status
2021-10-31T19:25:09 configd.py[80385] [2d7d8553-25dd-41ce-b062-da16cf32e5c4] requesting haproxy status
2021-10-31T19:25:01 configd.py[80385] [9a4fd2f0-e132-48a2-8139-cce3214c0150] Script action failed with Command '/usr/local/opnsense/scripts/OPNsense/HAProxy/syncCerts.py actions --output bootgrid --page-rows '10' --page '1' --search '' --sort-col '' --sort-dir ''' returned non-zero exit status 1. at Traceback (most recent call last): File "/usr/local/opnsense/service/modules/processhandler.py", line 478, in execute subprocess.check_call(script_command, env=self.config_environment, shell=True, File "/usr/local/lib/python3.8/subprocess.py", line 364, in check_call raise CalledProcessError(retcode, cmd) subprocess.CalledProcessError: Command '/usr/local/opnsense/scripts/OPNsense/HAProxy/syncCerts.py actions --output bootgrid --page-rows '10' --page '1' --search '' --sort-col '' --sort-dir ''' returned non-zero exit status 1.
2021-10-31T19:25:00 configd.py[80385] [a7ce6c55-c6ba-48a3-8e3d-ed343a65ae81] Script action failed with Command '/usr/local/opnsense/scripts/OPNsense/HAProxy/socketCommand.py show-servers --output bootstrap --page-rows '10' --page '1' --search '' --sort-col '' --sort-dir ''' returned non-zero exit status 1. at Traceback (most recent call last): File "/usr/local/opnsense/service/modules/processhandler.py", line 478, in execute subprocess.check_call(script_command, env=self.config_environment, shell=True, File "/usr/local/lib/python3.8/subprocess.py", line 364, in check_call raise CalledProcessError(retcode, cmd) subprocess.CalledProcessError: Command '/usr/local/opnsense/scripts/OPNsense/HAProxy/socketCommand.py show-servers --output bootstrap --page-rows '10' --page '1' --search '' --sort-col '' --sort-dir ''' returned non-zero exit status 1.
2021-10-31T19:25:00 configd.py[80385] [9a4fd2f0-e132-48a2-8139-cce3214c0150] Show certificate diff list
2021-10-31T19:25:00 configd.py[80385] [99f9e40d-dd2d-4b0e-a769-4d15f669988e] Inline action failed with OPNsense/HAProxy OPNsense/HAProxy/haproxy.conf expected token ',', got 'integer' at Traceback (most recent call last): File "/usr/local/opnsense/service/modules/template.py", line 247, in _generate j2_page = self._j2_env.get_template(template_filename) File "/usr/local/lib/python3.8/site-packages/jinja2/environment.py", line 997, in get_template return self._load_template(name, globals) File "/usr/local/lib/python3.8/site-packages/jinja2/environment.py", line 958, in _load_template template = self.loader.load(self, name, self.make_globals(globals)) File "/usr/local/lib/python3.8/site-packages/jinja2/loaders.py", line 137, in load code = environment.compile(source, name, filename) File "/usr/local/lib/python3.8/site-packages/jinja2/environment.py", line 757, in compile self.handle_exception(source=source_hint) File "/usr/local/lib/python3.8/site-packages/jinja2/environment.py", line 925, in handle_exception raise rewrite_traceback_stack(source=source) File "/usr/local/opnsense/service/modules/../templates/OPNsense/HAProxy/haproxy.conf", line 136, in template {% set acl_enabled = '0' %} jinja2.exceptions.TemplateSyntaxError: expected token ',', got 'integer' During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/local/opnsense/service/modules/processhandler.py", line 506, in execute return ph_inline_actions.execute(self, inline_act_parameters) File "/usr/local/opnsense/service/modules/ph_inline_actions.py", line 51, in execute filenames = tmpl.generate(parameters) File "/usr/local/opnsense/service/modules/template.py", line 341, in generate raise render_exception File "/usr/local/opnsense/service/modules/template.py", line 332, in generate for filename in self._generate(template_name, create_directory): File "/us
2021-10-31T19:25:00 configd.py[80385] [a7ce6c55-c6ba-48a3-8e3d-ed343a65ae81] show server status list
2021-10-31T19:25:00 configd.py[80385] [a723fbf5-9564-441b-a684-7cc92953f1ae] Inline action failed with OPNsense/HAProxy OPNsense/HAProxy/haproxy.conf expected token ',', got 'integer' at Traceback (most recent call last): File "/usr/local/opnsense/service/modules/template.py", line 247, in _generate j2_page = self._j2_env.get_template(template_filename) File "/usr/local/lib/python3.8/site-packages/jinja2/environment.py", line 997, in get_template return self._load_template(name, globals) File "/usr/local/lib/python3.8/site-packages/jinja2/environment.py", line 958, in _load_template template = self.loader.load(self, name, self.make_globals(globals)) File "/usr/local/lib/python3.8/site-packages/jinja2/loaders.py", line 137, in load code = environment.compile(source, name, filename) File "/usr/local/lib/python3.8/site-packages/jinja2/environment.py", line 757, in compile self.handle_exception(source=source_hint) File "/usr/local/lib/python3.8/site-packages/jinja2/environment.py", line 925, in handle_exception raise rewrite_traceback_stack(source=source) File "/usr/local/opnsense/service/modules/../templates/OPNsense/HAProxy/haproxy.conf", line 136, in template {% set acl_enabled = '0' %} jinja2.exceptions.TemplateSyntaxError: expected token ',', got 'integer' During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/local/opnsense/service/modules/processhandler.py", line 506, in execute return ph_inline_actions.execute(self, inline_act_parameters) File "/usr/local/opnsense/service/modules/ph_inline_actions.py", line 51, in execute filenames = tmpl.generate(parameters) File "/usr/local/opnsense/service/modules/template.py", line 341, in generate raise render_exception File "/usr/local/opnsense/service/modules/template.py", line 332, in generate for filename in self._generate(template_name, create_directory): File "/us
2021-10-31T19:25:00 configd.py[80385] [82fb7b54-06a8-4c14-9333-e86724372bf4] rsyncing certs to matrix
2021-10-31T19:25:00 configd.py[80385] generate template container OPNsense/HAProxy
2021-10-31T19:25:00 configd.py[80385] generate template container OPNsense/HAProxy
2021-10-31T19:24:59 configd.py[80385] [a723fbf5-9564-441b-a684-7cc92953f1ae] generate template OPNsense/HAProxy
2021-10-31T19:24:59 configd.py[80385] [99f9e40d-dd2d-4b0e-a769-4d15f669988e] generate template OPNsense/HAProxy
2021-10-31T19:24:58 configd.py[80385] [6752389e-7929-4691-bd04-74db80a42fa0] requesting haproxy statistics
2021-10-31T19:24:58 configd.py[80385] [9040b850-bb0e-48cd-b911-037851d4e24c] requesting haproxy statistics
2021-10-31T19:24:58 configd.py[80385] [efda7f86-4f7d-4528-9362-e42b7410bc39] requesting haproxy statistics
2021-10-31T19:24:26 configd.py[80385] [3950c3c5-2d22-4331-9dbd-d532411180be] Show log
2021-10-31T19:24:14 configd.py[80385] [7c0951f4-402a-47f4-b5af-0b7a22ac25c3] requesting haproxy status
2021-10-31T19:24:06 configd.py[80385] [fc69ddb2-6fd4-4a6e-9bea-e6f3c9787963] request pf current overall table record count and table-entries limit
2021-10-31T19:24:00 configd.py[80385] [b1487d67-84b8-4776-b513-b2cd06aa48dc] rsyncing certs to matrix
2021-10-31T19:23:00 configd.py[80385] [6f28862e-7444-4e3f-a89a-edcd4f35bbe7] rsyncing certs to matrix
2021-10-31T19:22:06 configd.py[80385] [37aab7ee-d323-421c-849d-981babe6eb54] request pf current overall table record count and table-entries limit
10
21.7 Legacy Series / Re: HAProxy won't start after upgrade opnsense to OPNsense 21.7. crt-list' : cannot
« on: October 31, 2021, 06:17:08 pm »
Hi Fright,
I've never configured https://x.x.x.x/ui/haproxy/maintenance.
But when I select anything there, it's loading forever.
Screenshot is attached. Doesn't matter if Firefox or Safari is used.
The haproxy config file, which worked before:
#
# Automatically generated configuration.
# Do not edit this file manually.
#
global
uid 80
gid 80
chroot /var/haproxy
daemon
stats socket /var/run/haproxy.socket group proxy mode 775 level admin
nbproc 1
nbthread 1
hard-stop-after 60s
tune.ssl.default-dh-param 1024
spread-checks 0
tune.chksize 16384
tune.bufsize 16384
tune.lua.maxmem 0
log x.x.x.15:514 local0 info
ssl-default-bind-options no-tls-tickets ssl-min-ver TLSv1.2 ssl-max-ver TLSv1.3
ssl-default-bind-ciphers ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256
ssl-default-bind-ciphersuites TLS_AES_256_GCM_SHA384:TLS_CHACHA20_POLY1305_SHA256:TLS_AES_128_GCM_SHA256
defaults
log global
option redispatch -1
maxconn 20
timeout client 30s
timeout connect 30s
timeout server 30s
retries 3
default-server init-addr last,libc
# autogenerated entries for ACLs
# autogenerated entries for config in backends/frontends
# autogenerated entries for stats
# Frontend: abc.xyz.efg (extern an x.x.x.x WAN opnsense)
frontend abc.xyz.efg
bind x.x.x.222:8448 name x.x.x.222:8448 ssl ssl-min-ver TLSv1.2 ssl-max-ver TLSv1.3 ciphers ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256 ciphersuites TLS_AES_256_GCM_SHA384:TLS_CHACHA20_POLY1305_SHA256:TLS_AES_128_GCM_SHA256 alpn h2,http/1.1 crt-list /tmp/haproxy/ssl/5f786192aa1931.32444913.certlist
bind x.x.x.222:443 name x.x.x.222:443 ssl ssl-min-ver TLSv1.2 ssl-max-ver TLSv1.3 ciphers ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256 ciphersuites TLS_AES_256_GCM_SHA384:TLS_CHACHA20_POLY1305_SHA256:TLS_AES_128_GCM_SHA256 alpn h2,http/1.1 crt-list /tmp/haproxy/ssl/5f786192aa1931.32444913.certlist
mode http
option http-keep-alive
default_backend backendPool_MATRIX
# remove quotes from persistence cookie
http-request replace-header Cookie '^(.*?; )?(SRVCOOKIE=)"([^;"]*)"(;.*)?$' \1\2\3\4
option forwardfor
# tuning options
maxconn 99
timeout client 30s
timeout http-request 1m
# logging options
option log-separate-errors
option httplog
option socket-stats
# Frontend: abc.xyz.efg_letsencrypt (extern an x.x.x.222:80 WAN opnsense 4 letsencrypt)
frontend abc.xyz.efg_letsencrypt
bind x.x.x.222:80 name x.x.x.222:80
mode http
option http-keep-alive
option forwardfor
# tuning options
maxconn 99
timeout client 30s
timeout http-request 1m
# logging options
option log-separate-errors
option httplog
option socket-stats
# ACL: find_acme_challenge
acl acl_5f786a15533763.99172881 path_beg -i /.well-known/acme-challenge/
# ACTION: redirect_acme_challenges
use_backend acme_challenge_backend if acl_5f786a15533763.99172881
# Backend: backendPool_MATRIX (zeigt auf alle Matrix Server im Backend)
backend backendPool_MATRIX
# health checking is DISABLED
mode http
balance source
cookie SRVCOOKIE prefix
# tuning options
timeout connect 30s
timeout server 30s
server matrix.abc.local x.x.x.22:8448 ssl alpn h2,http/1.1 verify none resolve-prefer ipv4 cookie 5f7865de6d0ed749902345
# Backend: acme_challenge_backend (Added by Let's Encrypt plugin)
backend acme_challenge_backend
# health checking is DISABLED
mode http
balance source
# stickiness
stick-table type ip size 50k expire 30m
stick on src
# tuning options
timeout connect 30s
timeout server 30s
http-reuse safe
server acme_challenge_host 127.0.0.1:43580 resolve-prefer ipv4
listen local_statistics
bind 127.0.0.1:8822
mode http
stats uri /haproxy?stats
stats realm HAProxy\ statistics
stats admin if TRUE
# statistics are DISABLED
Thanks,
Rene
I've never configured https://x.x.x.x/ui/haproxy/maintenance.
But when I select anything there, it's loading forever.
Screenshot is attached. Doesn't matter if Firefox or Safari is used.
The haproxy config file, which worked before:
#
# Automatically generated configuration.
# Do not edit this file manually.
#
global
uid 80
gid 80
chroot /var/haproxy
daemon
stats socket /var/run/haproxy.socket group proxy mode 775 level admin
nbproc 1
nbthread 1
hard-stop-after 60s
tune.ssl.default-dh-param 1024
spread-checks 0
tune.chksize 16384
tune.bufsize 16384
tune.lua.maxmem 0
log x.x.x.15:514 local0 info
ssl-default-bind-options no-tls-tickets ssl-min-ver TLSv1.2 ssl-max-ver TLSv1.3
ssl-default-bind-ciphers ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256
ssl-default-bind-ciphersuites TLS_AES_256_GCM_SHA384:TLS_CHACHA20_POLY1305_SHA256:TLS_AES_128_GCM_SHA256
defaults
log global
option redispatch -1
maxconn 20
timeout client 30s
timeout connect 30s
timeout server 30s
retries 3
default-server init-addr last,libc
# autogenerated entries for ACLs
# autogenerated entries for config in backends/frontends
# autogenerated entries for stats
# Frontend: abc.xyz.efg (extern an x.x.x.x WAN opnsense)
frontend abc.xyz.efg
bind x.x.x.222:8448 name x.x.x.222:8448 ssl ssl-min-ver TLSv1.2 ssl-max-ver TLSv1.3 ciphers ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256 ciphersuites TLS_AES_256_GCM_SHA384:TLS_CHACHA20_POLY1305_SHA256:TLS_AES_128_GCM_SHA256 alpn h2,http/1.1 crt-list /tmp/haproxy/ssl/5f786192aa1931.32444913.certlist
bind x.x.x.222:443 name x.x.x.222:443 ssl ssl-min-ver TLSv1.2 ssl-max-ver TLSv1.3 ciphers ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256 ciphersuites TLS_AES_256_GCM_SHA384:TLS_CHACHA20_POLY1305_SHA256:TLS_AES_128_GCM_SHA256 alpn h2,http/1.1 crt-list /tmp/haproxy/ssl/5f786192aa1931.32444913.certlist
mode http
option http-keep-alive
default_backend backendPool_MATRIX
# remove quotes from persistence cookie
http-request replace-header Cookie '^(.*?; )?(SRVCOOKIE=)"([^;"]*)"(;.*)?$' \1\2\3\4
option forwardfor
# tuning options
maxconn 99
timeout client 30s
timeout http-request 1m
# logging options
option log-separate-errors
option httplog
option socket-stats
# Frontend: abc.xyz.efg_letsencrypt (extern an x.x.x.222:80 WAN opnsense 4 letsencrypt)
frontend abc.xyz.efg_letsencrypt
bind x.x.x.222:80 name x.x.x.222:80
mode http
option http-keep-alive
option forwardfor
# tuning options
maxconn 99
timeout client 30s
timeout http-request 1m
# logging options
option log-separate-errors
option httplog
option socket-stats
# ACL: find_acme_challenge
acl acl_5f786a15533763.99172881 path_beg -i /.well-known/acme-challenge/
# ACTION: redirect_acme_challenges
use_backend acme_challenge_backend if acl_5f786a15533763.99172881
# Backend: backendPool_MATRIX (zeigt auf alle Matrix Server im Backend)
backend backendPool_MATRIX
# health checking is DISABLED
mode http
balance source
cookie SRVCOOKIE prefix
# tuning options
timeout connect 30s
timeout server 30s
server matrix.abc.local x.x.x.22:8448 ssl alpn h2,http/1.1 verify none resolve-prefer ipv4 cookie 5f7865de6d0ed749902345
# Backend: acme_challenge_backend (Added by Let's Encrypt plugin)
backend acme_challenge_backend
# health checking is DISABLED
mode http
balance source
# stickiness
stick-table type ip size 50k expire 30m
stick on src
# tuning options
timeout connect 30s
timeout server 30s
http-reuse safe
server acme_challenge_host 127.0.0.1:43580 resolve-prefer ipv4
listen local_statistics
bind 127.0.0.1:8822
mode http
stats uri /haproxy?stats
stats realm HAProxy\ statistics
stats admin if TRUE
# statistics are DISABLED
Thanks,
Rene
11
21.7 Legacy Series / Re: HAProxy won't start after upgrade opnsense to OPNsense 21.7. crt-list' : cannot
« on: October 31, 2021, 05:31:20 pm »
Hi Ben,
Thanks, 2 patches applied via ssh.
No change in behaviour.
Trying to change anything in the config, doesn't work too. Last change 1month ago.
# ls -al /usr/local/etc/haproxy.conf
-rw-r--r-- 1 root wheel 4642 Sep 30 11:25 /usr/local/etc/haproxy.conf
https://x.x.x.x/ui/haproxy/export config diff shows changes, which are not written into /usr/local/etc/haproxy.conf
# service haproxy start
[ALERT] 303/172454 (44675) : parsing [/usr/local/etc/haproxy.conf:46] : 'bind x.x.x.x:8448' : 'crt-list' : cannot open file '/tmp/haproxy/ssl/5f786192aa1931.32444913.certlist' : No such file or directory
[ALERT] 303/172454 (44675) : parsing [/usr/local/etc/haproxy.conf:47] : 'bind x.x.x.x:443' : 'crt-list' : cannot open file '/tmp/haproxy/ssl/5f786192aa1931.32444913.certlist' : No such file or directory
[ALERT] 303/172454 (44675) : Error(s) found in configuration file : /usr/local/etc/haproxy.conf
[ALERT] 303/172454 (44675) : Fatal errors found in configuration.
/usr/local/etc/rc.d/haproxy: WARNING: failed precmd routine for haproxy
Thanks,
Rene
Thanks, 2 patches applied via ssh.
No change in behaviour.
Trying to change anything in the config, doesn't work too. Last change 1month ago.
# ls -al /usr/local/etc/haproxy.conf
-rw-r--r-- 1 root wheel 4642 Sep 30 11:25 /usr/local/etc/haproxy.conf
https://x.x.x.x/ui/haproxy/export config diff shows changes, which are not written into /usr/local/etc/haproxy.conf
# service haproxy start
[ALERT] 303/172454 (44675) : parsing [/usr/local/etc/haproxy.conf:46] : 'bind x.x.x.x:8448' : 'crt-list' : cannot open file '/tmp/haproxy/ssl/5f786192aa1931.32444913.certlist' : No such file or directory
[ALERT] 303/172454 (44675) : parsing [/usr/local/etc/haproxy.conf:47] : 'bind x.x.x.x:443' : 'crt-list' : cannot open file '/tmp/haproxy/ssl/5f786192aa1931.32444913.certlist' : No such file or directory
[ALERT] 303/172454 (44675) : Error(s) found in configuration file : /usr/local/etc/haproxy.conf
[ALERT] 303/172454 (44675) : Fatal errors found in configuration.
/usr/local/etc/rc.d/haproxy: WARNING: failed precmd routine for haproxy
Thanks,
Rene
12
21.7 Legacy Series / [solved] HAProxy won't start after upgrade opnsense to OPNsense 21.7. crt-list'
« on: October 31, 2021, 03:23:21 pm »
[solved]
Hello,
HAProxy won't start after upgrade OPNsense to 21.7 today.
# service haproxy restart
haproxy not running? (check /var/run/haproxy.pid).
[ALERT] 303/151127 (81180) : parsing [/usr/local/etc/haproxy.conf:46] : 'bind x.x.x.x:8448' : 'crt-list' : cannot open file '/tmp/haproxy/ssl/5f786192aa1931.32444913.certlist' : No such file or directory
[ALERT] 303/151127 (81180) : parsing [/usr/local/etc/haproxy.conf:47] : 'bind x.x.x.x:443' : 'crt-list' : cannot open file '/tmp/haproxy/ssl/5f786192aa1931.32444913.certlist' : No such file or directory
[ALERT] 303/151127 (81180) : Error(s) found in configuration file : /usr/local/etc/haproxy.conf
[ALERT] 303/151127 (81180) : Fatal errors found in configuration.
/usr/local/etc/rc.d/haproxy: WARNING: failed precmd routine for haproxy
# ls /tmp/haproxy/ssl/
it's empty
HAProxy stopped working after upgrade and reboot. Letsencrypt certificate with acme client is still valid.
Didn't change the config in the last weeks.
Can you please help me?
Thanks,
Rene
Hello,
HAProxy won't start after upgrade OPNsense to 21.7 today.
# service haproxy restart
haproxy not running? (check /var/run/haproxy.pid).
[ALERT] 303/151127 (81180) : parsing [/usr/local/etc/haproxy.conf:46] : 'bind x.x.x.x:8448' : 'crt-list' : cannot open file '/tmp/haproxy/ssl/5f786192aa1931.32444913.certlist' : No such file or directory
[ALERT] 303/151127 (81180) : parsing [/usr/local/etc/haproxy.conf:47] : 'bind x.x.x.x:443' : 'crt-list' : cannot open file '/tmp/haproxy/ssl/5f786192aa1931.32444913.certlist' : No such file or directory
[ALERT] 303/151127 (81180) : Error(s) found in configuration file : /usr/local/etc/haproxy.conf
[ALERT] 303/151127 (81180) : Fatal errors found in configuration.
/usr/local/etc/rc.d/haproxy: WARNING: failed precmd routine for haproxy
# ls /tmp/haproxy/ssl/
it's empty
HAProxy stopped working after upgrade and reboot. Letsencrypt certificate with acme client is still valid.
Didn't change the config in the last weeks.
Can you please help me?
Thanks,
Rene
Pages: [1]