1
General Discussion / OPnSense Bridge w/VLAN's
« on: April 02, 2019, 10:55:58 am »
Hello , all
I've been struggling to make a "basic" setup with two bridges on the LAN side of the router:
Bridge1: em1 + em2
Bridge0: VLAN500 on em1 + em3
As I create Bridge1, bridge0 stops forwarding traffic.
Any suggestion will be appreciated.
***************************************
Configuration:
bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 02:0f:9d:95:72:00
inet 192.168.32.1 netmask 0xffffff00 broadcast 192.168.32.255
nd6 options=1<PERFORMNUD>
groups: bridge
id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200
root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
member: em3 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 4 priority 128 path cost 55
member: em1_vlan500 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 9 priority 128 path cost 20000
bridge1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 02:0f:9d:95:72:01
inet 172.16.0.1 netmask 0xffffff00 broadcast 172.16.0.255
nd6 options=1<PERFORMNUD>
groups: bridge
id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200
root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
member: em1 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 2 priority 128 path cost 55
member: em2 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 3 priority 128 path cost 55
สมัครยูฟ่าเบท
Bidge Options:
net.link.bridge.ipfw: 0
net.link.bridge.allow_llz_overlap: 0
net.link.bridge.inherit_mac: 0
net.link.bridge.log_stp: 0
net.link.bridge.pfil_local_phys: 0
net.link.bridge.pfil_member: 0
net.link.bridge.ipfw_arp: 0
net.link.bridge.pfil_bridge: 1
net.link.bridge.pfil_onlyip: 0
I've been struggling to make a "basic" setup with two bridges on the LAN side of the router:
Bridge1: em1 + em2
Bridge0: VLAN500 on em1 + em3
As I create Bridge1, bridge0 stops forwarding traffic.
Any suggestion will be appreciated.
***************************************
Configuration:
bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 02:0f:9d:95:72:00
inet 192.168.32.1 netmask 0xffffff00 broadcast 192.168.32.255
nd6 options=1<PERFORMNUD>
groups: bridge
id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200
root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
member: em3 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 4 priority 128 path cost 55
member: em1_vlan500 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 9 priority 128 path cost 20000
bridge1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 02:0f:9d:95:72:01
inet 172.16.0.1 netmask 0xffffff00 broadcast 172.16.0.255
nd6 options=1<PERFORMNUD>
groups: bridge
id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200
root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
member: em1 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 2 priority 128 path cost 55
member: em2 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 3 priority 128 path cost 55
สมัครยูฟ่าเบท
Bidge Options:
net.link.bridge.ipfw: 0
net.link.bridge.allow_llz_overlap: 0
net.link.bridge.inherit_mac: 0
net.link.bridge.log_stp: 0
net.link.bridge.pfil_local_phys: 0
net.link.bridge.pfil_member: 0
net.link.bridge.ipfw_arp: 0
net.link.bridge.pfil_bridge: 1
net.link.bridge.pfil_onlyip: 0