Messages

Hi,

We have the current setup:
LAN: 192.168.1.x
VOIPLAN: 10.0.10.x
Route to VOIPLAN via: 192.168.1.129 (L3 Switch Enterasys)

PC's in a LAN, IP telephones in VOIPLAN, when connected into the LAN we can open the telephone web interfaces on the VOIPLAN so the routing is working when in the LAN but not from VPN.

How can I get this route to work over VPN?
VPN Clients on: 10.0.7.x

VPN Server is pushing routes for both 192.x and 10.x network.
I can reach hosts on the LAN.
I tried a adding a firewall rule on OpenVPN accepting trafic and defining a specific gateway, no difference with having pass all.

Looking at the firewall when trying to connect to a host on 10.x shows pass, so it does not seem to block...

Tracert to an IP on the VOIPLAN shows it is going via the VPN 10.0.7.1 but then fails.

What am I missing?

Thanks in advance!

Kind regards
Johnny

Dear,

I'm trying to implement a route from LAN (192.168.1.x) to a VOIP LAN (10.0.10.x) via the non default router (192.168.1.129).
A ping from within LAN to a phone in VOIP LAN works but loading the webinterface of a phone in the VOIP LAN results in a page not found/connection error.

Tracing route to 10.0.10.155 over a maximum of 30 hops

  1     1 ms     1 ms     1 ms  OPNsense.localdomain [192.168.1.253]
  2     2 ms     2 ms     2 ms  192.168.1.129
  3     1 ms     1 ms     1 ms  10.0.10.155

What am I missing?

Kind regards,
Johnny