Messages

I get the same error on my Lex 3V900 when i try to install OPNSense from usb stick to internal ssd.
After many tries i setting the usb speed into the bios to 1.1 and use an usb dvd-drive to install. Thats work for me!

I set the USB speed to 1.1 it won't work.
I don't have an external DVD drive for testing it.

Are you sure, that you install OPNSense on an CF-Card!? I'm took a quick look into the specs of the Zotac nano. I didn't find an CF-Slot in into the description? Do you use an SATA2CF-Konverter?
I use a Lex 3V700 on my home FW with a 4 GB CF-card. I simpy wrote the OPNSense nano image with rufus to the CF-card. Afterputting the cf into the slot the lex 3V700 is booting up without any problems (vga)

It's a SD card slot
If I use Rufus to make a Nano version to SD, my system wil not boot. It's stuck on an blinking cursor, without seeing a bootscreen.

Tried even a lot of different USB drives, SD cards, Opnsense versions, and PC's
All the same problems.

Do anyone have an idea?
I tried it on multiple pc's, same screen

Weird, because Nano has both a VGA and a serial console enabled. I reckon you were on VGA? Did you see the OPNsense boot splash screen?

Yes, i use VGA
I don't see any OPNsense boot splash screen

Hi there,

The instructions here should help:

https://github.com/opnsense/tools/issues/28

The issue is fixed in the upcoming 17.1 images.

You could also flash the Nano image on the CF card, no install needed. :)


Cheers,
Franco

Unfortunately this wil not help.
Get the same screen as before.

Thank you.
When I installed the nano version, there is only a blinking cursor during booting.

Hello
Frist of all, thank you for this forum.
For a while i run pfsense on my micro pc. After a view troubles, i want to try and install opnsense.

Unfortunately i can not install opnsense on my Zbox CI325 nano
https://www.zotac.com/us/product/mini_pcs/zbox-ci325-nano#download

I make an installation with Rufus, for a USB device version 16.7.

My Zbox has a 4gb compact flash disk as storage.

It will boot from the USB device, can make a choice how to install (I just wait 10 seconds).
After a while i see this in my screen.


What do I wrong?

Greets