Messages

Hi Bart! Thanks for the reply.

Yes - Local LAN, I can see the server and it works great! With or without the windows firewall enabled.

Good call on Wireshark... totally forgot about that.

Windows Firewall - This is were you got me.
1. Telnet to that server on that port does not work. (Sorry forgot to include) - I will get wireshark and see what is going on.
2. The static IP of the Windows Server does have the default gateway set to my Opensense box (gateway)

Hi! I am starting here in this forum, though the issue may be related to something else.

I am attempting to create a dedicated server for the game Space Engineers. Working through the documentation they recommend a static IP (SO I am using my DYNDNS account!!) and that I forward the port that you set in the dedicated server console (27015).

No matter what I do, I seem to be unable to:
1. Successfully test the port 27015 using a port checking tool (I tested this by setting up the same forward for RDP to the server, and using an online port checking tool, it successfully validated the port)
2. From outside my LAN, i.e. from a friends house, access my home GUI for Opensense via my DYNDNS Hostname OR IP dynamically assigned by my ISP.

I am forward this traffic to a Windows 2012 R2 Server. I have setup the Firewall rule to accept incoming traffic on UDP 27015.

I am just at a loss and the companies documents are pretty trash lol. But, many other people are doing it, so why can't I?

Thank you!!
Jeremy

No dice... first go round I set the delay to 10000. Second go round I set the delay to 500000. Below is what I get until it errors out with the original attachment.

umass1: SCSI over Bulk-Only; quirks = 0x4001
umass1:5:1:-1: Attached to scbus5
run_interrupt_driven_hooks: still waiting after 60 seconds for xpt_config
...Above line repeats every 60 seconds until it finally errors.

Thank you for the responses. I am attempting to tray the delay now. One a separate note as well... it seems to take forever to load... When I was doing some testing in VMware, it seemed to load nice and fast...

Hi all-

Trying to run the installer from a USB stick. Tried a couple different sticks with no luck. Using Windows 10 with Rufus with the proper .img file. See attachment where it stops.