Topics

I though (and wanted) my ipv6-ip to be static, (not the temporary ipv6-adresses of course, but the "secret" ipv6 address) but it doesn't seem to be, have i misunderstood something? Is there a setting that decides this?

My settings is  IPv6 Configuration Type: DHCPv6 with Prefix delegation size 48

I don't know that much about ipv6, but i have setup where i get a /48 network, and i have made a /64 network "internally", and the clients get their IPs "themselves" with SLACC (if i understand correctly). I can make a firewall rule to let through a port to the IP. But can make OPNsense change the port? That is send something from port 2000 on wan to port 1000 on the LAN for instance? With IPv4 i would just use port forward.

Bonus question, is there a way to see the ipv6-adresses on my clients on the LAN?

I have 4 network ports, one for WAN, one for LAN (which goes to a switch), i want to use a port for my IPTV decoder, to get it to work I need to connect it directly into the router. But what is best practice to set this up? If I set up a dhcp server on the IPTV-interface this seem to cause trouble, even if i set it up to use a different range than the LAN interface. I use 192.168.1.x for IPs on the LAN-interface.

I am struggling with the setup for IPTV, i have postet a screenshot from my asus-router, with those IGMP-settings, the IPTV from my provider works well. But with the opnSense setup of igmp it doesn't work, any tips?

I recently for the first time have gotten an IPTV-box to what TV, it uses some kind of multicast setup, and it apparently needs uPNP to be turned on. I tried installing os-upnp, but do i understand it correctly that this cannot be configured through the web Interface?

I am struggling with the ddclient-plugin setup, I don't really care about which service it is I think, as long as it is free, and i can just register there, I tried with a couple, but I seem to set it up wrong. Does anyone have a working setup i can copy, with any service?

I am new to opnSense, but the DDNS-setup confuses me, i don't really have a specific provider i need to use, i tried with duckdns and dynu, but i seem to get the same problem. I downloaded the dd-client plugin, but the whole setup isn't really that easy to do, there is no "test"-function to see if the settings actually work, and it gives no indication of not working, but if i go into the logs and change the log-level i get a notice "found neither ipv4 nor ipv6 address", with both duckdns and dynu.  I have attached my settings, any tips on what i am doing wrong?