"
Hello,
opnsense 21.1 (nano)amd64
when i try to set on the webinterface, in this case called Pipename: "Download Pipe"(Firewall->Shaper->Pipes:(+Download pipe+), a delay like 10ms to the Pipe, it does not seems to apply the settings.
When i check out the output from
If i add a pipe manually from the command line:
then you can see the pipe "00001" has a delay from "10 ms" !
/usr/local/etc/ipfw.rules
...8-< snip
after rebooting still "0 ms" ...
opnsense 21.1 (nano)amd64
when i try to set on the webinterface, in this case called Pipename: "Download Pipe"(Firewall->Shaper->Pipes:(+Download pipe+), a delay like 10ms to the Pipe, it does not seems to apply the settings.
When i check out the output from
Code Select
ipfw list pipe then the "Download Pipe" or on the screenshot, called Pipe:"10000"... there is no delay, it shows "0 ms" for the "Download pipe".If i add a pipe manually from the command line:
Code Select
/sbin/ipfw -q pipe 1 config delay 10ms bw 2Mbit/sthen you can see the pipe "00001" has a delay from "10 ms" !
/usr/local/etc/ipfw.rules
...8-< snip
Code Select
#======================================================================================
# define dummynet pipes
#======================================================================================
pipe 10000 config bw 40Mbit/s queue 2 buckets 1 type fq_codel delay 10 target 5 interval 100 ecn quantum 1514 limit 1000 flows 1024
pipe 10001 config bw 1700Kbit/s buckets 1 type fq_codel delay 10 target 5 interval 100 ecn quantum 1514 limit 1000 flows 1024
after rebooting still "0 ms" ...
