Author Topic: [SOLVED] Install via SSH (nano deployment) (Read 3916 times)

Spirit · « **on:** July 31, 2017, 05:08:23 pm »

Hi,

i have i uses Cyberroam Firewall (600MhZ/512MB RAM/SSD 128GB) enhances RAM to 1GB for installation.
I could not use other deploment process as nano, as i was not able to boot from anything else.
So i preinstalled the nano image on the 128GB SSD.

Firewall ist running fine but only on the 4GB Partition.

Whould like to run the installation on the disk.
I managed to activate the SSH via GUI but i can not login by the installer, root ist possible but there ist no installer option.

Thanks for any Help

franco · « **Reply #1 on:** July 31, 2017, 08:05:00 pm »

Hi Spirit,

The Nano image is not an installer per se. It has a partition grow feature, you flash it to a card or disk and boot it and it's ready to be used... But you can still use the installer (all the time):

# opnsense-installer

But since Nano is not a traditional install media, you can't automatically access the installer via SSH user "installer" on boot, you need to grant root access to SSH and go from there.

Cheers,
Franco

Spirit · « **Reply #2 on:** September 01, 2017, 06:11:42 pm »

Even it is late, thanks for the hint.
Two boxes working right now

franco · « **Reply #3 on:** September 01, 2017, 06:13:30 pm »

Sounds good.

Cheers,
Franco

Author Topic: [SOLVED] Install via SSH (nano deployment) (Read 3916 times)

Spirit

[SOLVED] Install via SSH (nano deployment)

franco

Re: Install via SSH (nano deployment)

Spirit

Re: Install via SSH (nano deployment)

franco

Re: [SOLVED] Install via SSH (nano deployment)